Skip to content
Features
VCHEK LoZ low impedance measurement function to test for either AC or DC voltage, or show continuity if voltage is not detected.
Large backlit display
CAT IV 600 V safety rated
Features
Ideal Digital Multimeter for “go/no-go” testing
Features AutoVolt automatic AC/DC voltage selection
Includes low input impedance to help prevent false readings due to ghost voltage
Presents a large white LED backlight for working in poorly lit areas
Measures resistance and continuity
Provides Min/Max/Average with elapsed time to record signal fluctuations
Features
Compact True-RMS digital multimeter for field service
Includes: meter, holster, 4 mm silicone test lead set
Easy one-handed operation of the meter
Min/Max/Average to record signal fluctuations
Features
Digital multimeter designed specifically for HVAC professionals
Includes built-in thermometer to measure temperature from -40°C to 400°C (-40°F to 752°F)
Provides microamps to test flame sensors
Features low input impedance to helps prevent false readings due to ghost voltage
Presents a large white LED backlight for working in poorly lit areas
Features
Compact, true-rms digital multimeter for electricians
Includes multimeter, 4mm silicone test leads, holster and manual
Integrated non-contact voltage detection keeps you safe
Prevent false readings from ghost voltage with selectable low-impedance mode
Features
Rugged, compact advanced insulation resistance tester for electrical contractors and industrial and commercial electricians
Automatically calculates Polarization Index and Dielectric Absorption Ratio
Makes repetitive tests simple and easy with a Compare (Pass/Fail) function
Offers multiple insulation test voltages: 50 V, 100 V, 250 V, 500 V, and 1000 V
Features
Auto discharge of capacitive voltage
AC/DC voltage
DC millivolts
AC/DC milliamps
Continuity
Auto power off to save battery power
True RMS
Large display with backlight
Live circuit detection prevents insulation test if voltage <30 V is detected for added user protection
CAT III 1000V, CAT IV 600V measurement category
Features
PI/DAR timed ratio tests
Live circuit detection prevents insulation test if voltage >30 V is detected for added user protection
VFD low-pass filter for accurate motor drive measurements
Auto-discharge of capacities voltage for added user protection
Insulation test of 0.01 MΩ to 2 GΩ
Insulation test voltages of 50, 100, 250, 500 V for many applications
AC/DC voltage, DC millivolts, AC/DC milliamps, resistance (Ω), continuity
Capacitance, diode test, temperature, Min/Max, frequency (Hz)
Auto power off to save battery power
CAT III 1000 V, CAT IV 600 V measurement category
Large display with backlight
Safety first. Keep yourself out of harm's way by monitoring your test measurements remotely
Prove your job is done right by quickly seeing and sharing measurement results wirelessly with your smartphone
Quickly find problems by saving and comparing measurements over time on a wireless device
Features
True-RMS digital multimeter with the features professional technicians prefer
Increases productivity with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recording
Measures AC and DC voltage to 1000 V
Delivers accurate True-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode measurements
Safety rated CAT III 1000 V, CAT IV 600 V
Features
1000V AC/DC; 10A AC/DC (with test leads and current jacks); resistance to 50 MΩ; capacitance to 10,000 μF, frequency to 100 kHz; temperature from -40 ℃ to 400 ℃
Robust, fast and accurate with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-Average recording
Backlit digital display, analog bar graph, and built-in temperature measurements with included thermocouple.
Features
IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
Designed to withstand 3 meter drop (with holster)
Unique function for accurate
Features
Rugged, reliable basic True-RMS clamp meter for measuring current up to 400 A
Measures AC current to 400 A
Measures AC voltage and DC voltage to 600 V
Provides True RMS AC voltage and current for accurate measurements on non-linear signals
Measures resistance to 4 kΩ with continuity detection
Features
Rugged, reliable basic True-RMS clamp meter for measuring current up to 400 A
Measures AC current to 400 A
Measures AC voltage and DC voltage to 600 V
Provides True RMS AC voltage and current for accurate measurements on non-linear signals
Measures resistance to 4 kΩ with continuity detection
Features
True-rms AC/DC current, voltage, temperature, frequency
Clamp meter, test leads, K-type thermocouple and soft case
Versatile tool performs most front-line measurement tasks
Features
Electric pump for one handed pressure calibration
Best in class pressure measurement uncertainty of 0.025 %
Measure and source mA with best in class 0.015 % accuracy
Precision pressure adjust vernier
Variable release rate bleed valve for easy pressure adjustment
Ideal performance for high accuracy transmitter calibration
30 PSI and 100 PSI pressure ranges
Programmable pump limit:
- Eliminates over-pressurization
- Allows the user to program target pressures for pumping
Extended measurement range with any of twenty-nine (29)
700Pxx Pressure Modules
Source mA with simultaneous pressure measurement to
test valves and I/Ps
Simulate mA signals to troubleshoot 4-20 mA loops
Test pressure switches with built in switch test function
Power transmitters during test using 24 V loop supply
Proven cleanout ports reduce pump failures
Features
Large display
Backlight for work in dim areas
Min / Max to record signal fluctuations
Ergonomic overmolded housing with integrated probe holders
Free your hands with the optional TPAK magnetic hanger
Auto and Manual ranging
Meets Measurement Category 1000 V CAT III and Category IV 600 V safety standards
Features
Identify complex signal problems fast
Supports accurate measurements on VFDs using a low-pass filter
Captures intermittents as fast as 250 µS with Peak Capture
Features
One pair (red, black) comfort grip probes with silicone insulated, right-angle test leads
Recommended for µV measurements
CAT II 1000 V, 10 A rating
CAT III 1000 V, CAT IV 600V only with protective cap
Features
Quick scans of electrical equipment, machinery and other assets
Enterprise Wi-Fi
Fully radiometric thermal imager gives you measurement data to the pixel with 120 x 90 infrared resolution (10,800 pixels)
-4 to 302°F (-20 to 150°C) temperature measurement range
Manual level and span
Feature
Increased sensitivity to visualize temperature differences
Easier to visualize and diagnose issues with sharper onscreen images, multiple rectangle markers and 9 color palettes
More intuitive visual interface, improved, user-tested, touch screen interface
More flexibility to visualize target, tiny-to-large with interchangeable smart lenses - no calibration required, 2x and 4x telephoto, wide angle and macro lens compatibility
Capture a clear, accurate image focused throughout the field of view with MultiSharp™ Focus
Get an instant in-focus image of your designated target. LaserSharp® Auto Focus uses a built-in laser distance meter that calculates and displays the distance from your designated target.
Get 4x the pixel data with SuperResolution, which captures multiple images and combines them to create a 1280 x 960 image
Save time - wirelessly sync images directly from your camera to the Fluke Connect® system, and attach to an asset record or work order
Reduce the need take notes in the field with IR-PhotoNotes™ and voice annotations
Subject to Export Control
Features
Easily and quickly identify problems before they become expensive failures
See the details with improved resolution that delivers the right image quality you need to make the proper diagnosis with 2.5 times more pixels
See more clearly than before and analyze faster with picture-in-picture and blending at different preset levels to capture incredibly detailed images that help identify potential issues
Clearly see what you are inspecting with 3.5 inch 320 x 240 LCD - 33% more viewing area compared to 3.0 inch LCD screen
Simple, easy to use point and shoot technology automatically focuses from 0.45m (1.5ft) and beyond
Fluke Connect with ShareLive video call is the only wireless measurement system that lets you stay in contact with your entire team without leaving the field. The Fluke Connect mobile app is available for Android (4.3 and up) and iOS (4s and later)
Feature
IR Fusion® technology with AutoBlend™ mode blends visual and infrared images so you can see the details crucial to identifying potential problems
IR-PhotoNotes™ makes it quick and simple to document critical information by allowing you to add up to 3 digital images to your thermal image
Use voice annotation to document what you're looking at, even in dark spaces, or to capture non-visible surrounding details
Save time by using color alarms to set temperature thresholds; conduct a quick scan and easily diagnose irregularities
Fluke Connect® enabled so you can capture and share reliable data you can trust and trace
Feature
Manual focus infrared camera with professional grade 320x240 resolution (76,800 pixels)
Captures optimal images from as close as 0.15m (6in)
Provides a D:S of 514:1
Offers temperature measurement range from -20 °C to 550 °C (–4 °F to 1022 °F)
Includes built-in laser pointer
Displays images on a 3.5 inch, 320x240 LCD
Offers five presets of IR-Fusion® with AutoBlend and PIP to help find problems fast
Captures visible light images with built-in 5 megapixel industrial performance digital camera
Includes a smart battery system that allows you to easily monitor your battery charge level with five-segment LED display
Allows real-time communication by email from your smart phone with Fluke Connect®*
Stores thousands of images—4 GB internal memory and included 4 GB micro SD card
Page load link
Features
Features
Features
Features
Features
Features
Features
Features
Features
Features
Features
Features
Features
Features
Features
Features
Features
Features
Features
Feature
Features
Feature
Feature