- Embedded run/stop switch, motor on/off, load run, auto-stop, manual stop, operation delay, load delay, embedded timer
- Pressure / temperature high level
- Temperature low level (standby for starting)
- Interlock input signal (emergency switch, OCR reverse phase)
- Usable thermometer and manometer
- RS485 communication (MODBUS)
-
Main Function -
Main Function- Embedded run/stop switch, motor on/off, load run, auto-stop, manual stop, operation delay, load delay, embedded timer
- Pressure / temperature high level
- Temperature low level (standby for starting)
- Interlock input signal (emergency switch, OCR reverse phase)
- Usable thermometer and manometer
- RS485 communication (MODBUS)
-
Main Function- Total control and detection (protection) for freezers
- Function of start, restart, pump down, alarm delay timer
- Discharge gas detection (high & low temperature)
- Individual alarm message (OC, HP, LP, OP, INT)
- RS485 communication (MODBUS)
-
Main Function- PID degree of superheat control through defense and safety compensation
- Degree of superheat control for various refrigerant
- PMW (opening ratios control)
- Remote operation
- Transmission output
- RS485 communication (MODBUS)
-
Main Function- 3 stage fan speed controllable
- 4 kind (stop / high / middle / low) airflow choosable
- Unification of temperature control function
- Data backup
- Self diagnostic
- RS485 communication (MODBUS)
-
Main Function- Defrosting (auto / manual)
- Fan control
- Efficient delay
- Room temperature sensor: 1EA
- Defrost sensor: 1EA
- High (low) temperature alarm output
- Room temperature transmission output (4~20 mA)
- RS485 communication (MODBUS)
-
Main Function- Efficient defrosting in geothermy heat pump system
- Defrosting execution by measuring of ambient humidity and temperature
-
Main Function- Output controllable based on measured pressure value (increase and decrease)
- Alternative operation available between freezing exclusive model and booster
- Pump unit control model
- RS485 MODBUS
-
Main Function- Uniform step control
- Operation with intelligent shift high / low alarm output
- Sensor correction / Sensor error detection
- Transmission output
- RS485 communication (MODBUS)
-
Main Function- Defrosting (auto / manual)
- Defrosting stop delay
- Evaporation fan control
- Air inlet/outlet sensor: 2EA
- Defrost recovery sensor: 1EA
- Virtual temperature sensor computing
- Door open alarm
- Emergency call
- Night operation
- High (low) temperature alarm output
- RS485 communication (MODBUS)
-
Main Function- Defrosting (auto / manual)
- Defrosting stop delay
- 2 air inlet/outlet sensors
- One sensor for defrost recovery
- High / Low alarm output
- Indicator (FixView) connection
- RS485 communication (MODBUS)
-
Main Function- Heating / cooling output
- Independent timer output
- High / Low alarm output
- Defrost output
- Precise temperature control
- Sensor correction
- Sensor error detection
- Data back up
- Minimum on/off maintaining time setup
- RS485 communication (MODBUS)
- Transmission output
- Auto-output operation cycle settable in case of sensor error
-
Features- Humidification (heating)
- Dehumidification (cooling) output
- High/Low alarm output
- Min. on/off maintaining time setup
- Selection on/off output when sensor error occurs
- Sensor correction
- Sensor error detection
- Relay output manual control
- Transmission output
- RS485 communication (MODBUS)
-
Main Function- Heating / cooling output
- Independent timer output
- High / Low alarm output
- Defrost output
- Precise temperature control
- Sensor correction
- Sensor error detection
- Data back up
- Minimum on/off maintaining time setup
- RS485 communication (MODBUS)
- Transmission output
- Auto-output operation cycle settable in case of sensor error
-
Main Function- Humidification/dehumidification output
- High/Low alarm output
- Min. on/off maintaining time setup
- Selection on/off output when sensor error occurs
- Sensor correction
- Sensor error detection
- Selection of displaying decimal point
-
Main Function- Heating / cooling output
- High / Low alarm output
- Precise temperature control
- Sensor correction
- Sensor error detection
- Data back up
- Minimum on/off maintaining time setup
- RS485 communication (MODBUS)
- Transmission output
-
Main Function- Heating / cooling output
- Precise temperature control
- Sensor correction
- Sensor error detection
- Data back up
- Minimum on/off maintaining time setup
- Auto-output operation cycle settable in case of sensor error
-
Main Function- Heating/cooling output
- High / Low alarm output
- Precise temperature control.
- Sensor correction, sensor error detection
- Sensor error detection
- Data backup
- Min. on/off maintaining time setup
- Transmission output
- RS485 communication (MODBUS)
-
Main Function- Heating / cooling output
- Independent timer output
- High / Low alarm output
- Precise temperature control
- Sensor correction
- Sensor error detection
- Data back up
- Minimum on/off maintaining time setup
- RS485 communication (MODBUS)
- Transmission output
-
Features- Uses a multi-fin, centrifugal level vertical heat exchange circulation system; ventilation rate can be adjusted to the desired rate.
- Internal rotating pan can be convenient removed and installed, the motor rotating speed of hang shelf is 8-10 rpm.
- A digital watt/hour meter and timer can be used to present the air refresh rate.
-
Features- Panel Dimension: 1.5" - 3.4"; 14.1" - 42"
- CLCD-9700 Color touch panel controller was made in Japan
- Forced air in and out to control the loading of specimen
- Wider viewing glass design and have a connecting to safety protection device
- Easily changed design as your product changes
-
Features- Two optional sampling methods: diffusion or pump aspiration
- User-friendly meter with multilingual user interface
- Numerical and graphical display of measurements
- Data can be logged and transferred to PC via MI70 Link software
- Multiprobe operation: Vaisala’s relative humidity and dew point probes can be used simultaneously with CO2 measurement
-
Features- Measured parameters: carbon dioxide, temperature, and humidity (optional)
- Superior long-term stability with the latest-generation Vaisala CARBOCAPâ sensor
- Accurate temperature and humidity measurements due to the low-power microglow infrared source
- Quick and easy installation and maintenance
- Calibrated, user-exchangeable measurement modules
- 23-point traceable CO2 calibration (certification included)
- Both analog and field bus communication (Modbusâ RTU)
-
Features- Adopt computerized electronic digital control, precise & reliable.
- The packing of box insulation is molded by silicone, high-temperature enduring & never aged attached with observation view window, easy to be used
- Heating is by compulsory circulating ventilation, temperature raising is fast and spread even
- Provide the P.I.D control system, double sided overheating protection, safe & reliable.
- Easy to set temperature, easier to operate
- Attached with two sets of moveable disks to be adjusted high and low at your dispel
-
Features- Made entirely of P.P & PVC, resistant to acids, bases and heat. It can be used with salt spray acetic acid, or any other testing material.
- Patented nozzle and conical dispersion unit ensure even spraying rate
- It can be controlled manually, or for up 9,991 hours of operation
- At the end of the experiment, a defogger automatically cleans the inside of the testing chamber for specimen.
- Three set temperature controlling systems of air-tank temperature, test area temperature, solution temperature. To make sure the correctness amd standard of the testing.
-
Features- T-Bar Design
- 1-Second Measuring Interval
- Max. - Min. Function
- Auto Off-Function
- Water-Tight
- Protective cover and pocket clips included
-
Features- System capacity: It could sign in 150 programs x 1500 partitions, partitions can be optionally divided and program can link up to each other.
- Loop configuration: 9999 x 999 looping time, can be divided into 5 independent sub-loops
- Output: Intelligent PID + SSR/ SCR two-way synchronous output, built-in advanced slope control logic
- Data: Touch panel dialogue box display, easy operation, built-in managemnet system of data content
- Curves drawing: When temperature, humidity and times are set up, the data can be immediately transferred into curves, actual operating curves can be attained during operations
-
Features- On desk design affords small volume with occupying space
- All programmed instructions are microprocessor-controlled. with PID and automatic calculation to ensure precise and stable temperature and humidity control.
- In the case of thermostat breakdown, a warning light switches on and temperature setting is changed to standard
- Heat is evenly distributed throughout the testing chamber to ensure a uniform testing temperature
-
Features- The design mode of these sets is one body affords convenient application and less space occupation.
- It can separately test high temperature and constant temperature and humidity.
- All systems are individual and independent. The three sets type of the refrigstion system and three sets of the type heating and humidifying systems are adopted. The three set type systems afford stable control and high accuracy, prolonging the service life machine parts.
- All programmed instructions are microprocessor-controlled, with PID and automatic calculation to ensure precise and stable temperature and humidity control.
-
Features- This equipment features independent systems with vibration control and cross-temperature and cross-humidity controls. It can be set to test and display results for high temperatures, low temperatures, cross temperatures and humidity and vibration, either individually or at the same time.
- Moveable guide rails for easy testing separately or simultaneously.
- Large LCD display in Chinese or English plus 100-program memory and standard RS-232C computer interface.
-
Features- 2-Zone/ 3-Zone Stationary Specimen, Exposure By Cooling Air/ Hot Air Changeover.
- The machine is divide into three sections: the high temperature chamber, the low temperature chamber and the testing chamber.
- The color touch panel control system was made in Japan can display Chinese / English. The big size liquid-crystal LCD (320X240) has been adopted.
- High formula memory capacity may be set to 100 patterns. the maximum cycle setting is 9999 cycles. The maximum setting of each section is 999Hrs 59Mins.
- Provided with RS-232C communication interface device, capable of controlling/ editing/ editing recording in line linkage with the computer and two set dynamic connection point (TIMER SIGNAL REPLAY) and convenient application.
-
Features- Strong counter-rotating mixture of high and low temperatures.
- Features automatic positioning in both horizontal and vertical axes, plus pre warming, pre-cooling and recording of shock results.
- Uses the Garden DO2ts heating oil in hot and cold chambers to minimize the costs of oil changes.
- Large LCD (320 x 240 dots) with Chinese / English display of temperatures, with programmable mini-computer control system.
- This system is suitable for on-site use with choice of water cooling or air cooling.
-
Features- Stainless steel #304 interior and painted galvanized steel exterior for long life and beautiful appearance.
- Fitting the large number or volume testing.
- Power all linking control to provide the best safety.
- The internal volume may be randomly enlarged and contracted which design is depending on the environmental requirement of the user.
- And the move would be many fast when customer want to changer to another factory
- Adopt the Japanese Micro-Computer control system of English/ Chinese display with big size LCD (320*240 dots(. High function and simple to operate.
- Provide with RS-232 communication interface device, capable of linking with a computer to control, edit, record, and connect timer signal delay
-
Features- Visual Range Up to 20 Meters
- High Accuracy
- Display temperature and humidity
- Reliable and stable sensors
- Calibration Function
- External Power and Wall Hanging
- Optional Accessories: Light, Sound, GSM Alarms
- PC Software ToMonitor + ToClient Software Management System
- 4 keys, could set deviation, Set upper and lower limits of the alarm
-
Features- Large screen LED thermohygrometer.
- High precision and recording function (optional).
- Fast response.
- Appearance: Wall mounted
- Resolution: Temperature 0.1˚C; Humidity 0.1% RH
- Optional external alarm device available (Code: A01)
-
Features- Compact size
- RH accuracy up to ±1.0 %RH
- Temperature accuracy up to ±0.2 °C (0.36 °F)
- Temperature measurement range −40 … +60 °C (−40 … +140 °F)
- Chemical purge provides superior chemical resistance
- Modbus RTU over RS-485
- Compatible with Indigo series transmitters and Insight PC software
- Traceable calibration certificate: 6 points for humidity, 1 point for temperature