- Electrical Troubleshooting
- Automotive Repair And Maintenance
- Air Conditioner
- Science Experiment
- Manufacturing Processes of Semiconductor Technology
-
Features -
Features- °F/°C configurable
- Backlit display
- Set HI\LO temperature brackets for both sensors
- Set target temperatures for both sensors
- Magnetic attachment
- Timer, stopwatch, and resting alarm
- IP65 water resistant
-
Features- °F/°C configurable
- No calibration needed
- 1.5" display
- Sleep mode
- Magnetic attachment
- Zeomic antimicrobial coating
- Ø 1.6mm tapered tip
- IP65 splash resistant
-
Features- °F/°C configurable
- 2" antifog backlit display
- Intelligent stabilization alert
- Ambidextrous display
- Antimicrobial coating
- Motion-backlight activation
- IP65 splash resistant
-
Features- Ideal for room, indoor and outside
- Large Dial for Easy Reading
- No Power Needed
- Temp. and Humidity display simultaneously
- Made with Stainless Frame
-
Features- With 3 Function Buttons °C/°F, IN, OUT
- Easy Operating and Reading
- Max/Min Memory Recalling
- 1m External Wire With Probe for Outdoor Measurement
-
Features- Interchangeable digital sensor probe
- Extended cable
- Fast response
- Dual display
- Audible and visual alarms
- Desk or wall mount
- MAX/MIN function
- Auto Power Off/li>
- Tilt stand
- Resolution 0.1°C, 0.1°F, 0.1%RH
-
Features- Dew point and wet bulb temperature measurement
- Fast response
- Auto Power Off
- Dual display
- Dual display for temperature and humidity
- MAX/MIN function
- Resolution 0.1°C, 0.1°F, 0.1%RH
-
Main Function- Humidification/dehumidification output
- High/Low alarm output
- Min. on/off maintaining time setup
- Selection on/off output when sensor error occurs
- Sensor correction
- Sensor error detection
- Selection of displaying decimal point
-
Features- Humidification (heating)
- Dehumidification (cooling) output
- High/Low alarm output
- Min. on/off maintaining time setup
- Selection on/off output when sensor error occurs
- Sensor correction
- Sensor error detection
- Relay output manual control
- Transmission output
- RS485 communication (MODBUS)
-
Best-selling hygro-thermograph recorder equipped with an electronic sensor. Features- Easy-to-read digital display
- Up to 6 months continuous recording on chart paper...
- Long-term stable measurement
- Sensor cable extension
- User calibration
- Environmentally friendly product
-
Best-selling ST-50 series hygro-thermograph recorder equipped with an electronic sensor. Features- Important measurement records can be backed up in CSV format.
- Up to 6 months record on chart paper
- Data can be saved to a memory card (SD card)
- Long term recording
- Long-term stability, wide range measurement
- Sensor cable extension
-
Features- Digital sensor applied for MEMS technology
- Embedded RS485 communication port based on MODBUS RTU/ASCII
- Excellent long term stability and self-digital correction
- Quick counter reaction speed (within 4 second)
- Slim size - 310(L) x 280(H) x 45(D) mm
-
Characteristics- nominal pressure ranges from 0 ... 1 bar up to 0 ... 10 bar also -1 ... 0 bar
- 1 or 2 contacts
- Compact design
- Configurable via PC or programming device P6
- Pneumatic
- Vacuum technology
-
Characteristics:- Stainless Steel Sensor, Process, Oil And Gas Industry
- Differential pressure ranges from 1 mbar up to 20 bar
- Accuracy according to IEC 60770: 0.075 % FSO
-
Features- Compact True-RMS digital multimeter for field service
- Includes: meter, holster, 4 mm silicone test lead set
- Easy one-handed operation of the meter
- Min/Max/Average to record signal fluctuations
-
Features- Digital multimeter designed specifically for HVAC professionals
- Includes built-in thermometer to measure temperature from -40°C to 400°C (-40°F to 752°F)
- Provides microamps to test flame sensors
- Features low input impedance to helps prevent false readings due to ghost voltage
- Presents a large white LED backlight for working in poorly lit areas
-
Features- Compact, true-rms digital multimeter for electricians
- Includes multimeter, 4mm silicone test leads, holster and manual
- Integrated non-contact voltage detection keeps you safe
- Prevent false readings from ghost voltage with selectable low-impedance mode
-
Features- IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
- Designed to withstand 3 meter drop (with holster)
- Unique function for accurate
-
Features- Identify complex signal problems fast
- Supports accurate measurements on VFDs using a low-pass filter
- Captures intermittents as fast as 250 µS with Peak Capture
-
Features- 1000V AC/DC; 10A AC/DC (with test leads and current jacks); resistance to 50 MΩ; capacitance to 10,000 μF, frequency to 100 kHz; temperature from -40 ℃ to 400 ℃
- Robust, fast and accurate with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-Average recording
- Backlit digital display, analog bar graph, and built-in temperature measurements with included thermocouple.
-
Features:- Measuring Range 1000A
- With 0.1A High Resolution
- 1ms PEAK HOLD Function
- High Speed Bargraph
- DATA HOLD Function
- MAX/MIN/REL Function
- Auto Power Off
- Measuring Frequency From Current Clamp and Test Terminal
-
Features:- 4 Digital Display
- TRUE RMS
- Auto Power Off
- Peak Hold Function
- Data HoldFunction
- Auto Zero
-
Features:- 4 Digital Display
- 10uA Resolution
- Auto Power Off
- Autoranging
- Peak Hold Function
- Data HoldFunction
- Auto Zero
-
Features • With 0.01A High Resolution • Measuring Frequency From Current Clamp & Test Terminal • Inrush Function(250) • Back Light Function • Data Hold Function • Auto Power Off • Autoranging -
Features:- True RMS
- For HVAC
- Capacitor, DCµA, Temperature functions
- 1ms Peak Hold Function
- 0.01A High Resolution
- Data Hold Function
- Autoranging
- Measure frequency from current clamp and test terminal
- Backlit LCD
-
Feature- Air velocity measurement: m/s, km/hr, ft/min, MPH,
- Knots & build in temperature ºC / ºF, humidity %RH
- Air velocity compensation in atmospheric pressure
- Air flow measure: CMM, CFM
- Telescoping hot wire probe
- Fast response
- Large LCD display with backlight
- Min/Max/Avg & 2/3Vmax function
- With USB interface supply power
- Adjustable auto power off timer
- Data Hold function
- Battery Life indicator
- Tilt Stand
-
Features- 25 Memory Groups
- Programmable
- Read Intervals, Start/Stop, Number Of Readings
- Digital Display In English And Metric Units
- 2000 Reading Memory With Date And Time Stamp
-
Features- 60dB Dynamic Space in each Range
- Time weighting Fast / Slow
- AC/DC signal output
- 1ms Peak Hold Function
- Max/Min Function
- ½ inch electret condenser microphone (with metal housing)
- Bargraph indication
- Patented
-
Features- 32,000 Records Datalogger
- 60dB Dynamic Space in each Range
- Real-time clock with calendar
- Time weighting Fast / Slow
- AC/DC signal output
- 1ms Peak Hold Function
- Max/Min Function
- USB interface
- With Windows software
- Bargraph indication
- Patented
-
Features- 5 Digital Display
- Auto Ranging
- Automatic Power Off
- FC / lx Function Selectable
- HOLD Function
- Range Display
- Automatic Zero When Power On
-
Features- 3 1/2 Digits, 1999 Count LCD
- Fc / lx Function Selectable
- Data Hold Function
- Range Display
- Big LCD Display
- Automatic Zero When Power On
- Detachable & Rotatable Light Sensor
-
Features:- User Adjustable Parameter For Special Light Source
- Measure Most Popular Light Sources In Lux or Fc
- Removable Probe For Easy Access To The Source
- Cosine And Color Corrected Measurements
- Built-in Sensor With Protective Cover
- Min/Max Average And Auto Power Off
- Large LCD Display For Easy Reading
- Max/Min Function
-
Features • Measure UV Light In The Environment Monitoring And Process Control • Removable Probe For Easy Access To The Source • Measuring Range Fully Covering UVA And UVB • Large LCD Display For Easy Reading • Auto Power Off Function • Max/Min Function -
Features:- Digital LCD display with backlight
- 5.5% to 99.9% Range, 0~1 V
- Stored up to 99 readings
- 8 wood groups build in
- Max./Min./Average values recalled
- Built-in calibration
- Changeable of extension probe
- CE and RoHS Approved
-
Features:- Multi-color LED Bar-Graph readout
- 5.5% to 100% Moisture Range
- 0~1 Vdc Signal Output
- Audible alert when value is detected
- Built-in calibration function
- Sturdy and durable moisture probe
- CE and RoHS Approved