- Wide measurement range
- Simple operation
- Integral sampling system
- Rugged industrial case
- ±2°Cdp (±3.6°F) accuracy
- Traceable to National Standards
- 16 hours of operation between charges
- Lowest cost of ownership due to minimal maintenance
-
Features -
Features- Rapid spot-check measurements to –50°Cdp
- T95 to –35°C dew point in <10 minutes
- Simple operation
- Integral sampling system
- Industrial case
- ±2°Cdp accuracy
- 9-point traceable calibration
- 16 hours of operation between charges
-
Features- Humidification (heating)
- Dehumidification (cooling) output
- High/Low alarm output
- Min. on/off maintaining time setup
- Selection on/off output when sensor error occurs
- Sensor correction
- Sensor error detection
- Relay output manual control
- Transmission output
- RS485 communication (MODBUS)
-
Main Function- Humidification/dehumidification output
- High/Low alarm output
- Min. on/off maintaining time setup
- Selection on/off output when sensor error occurs
- Sensor correction
- Sensor error detection
- Selection of displaying decimal point
-
Features- Displays %RH and temperature, plus dew point, absolute humidity and wet bulb temperature
- Simple to operate
- Long term stability: ±1% RH over 12 months
-
Features- Dew point and wet bulb temperature measurement
- Fast response
- Auto Power Off
- Dual display
- Dual display for temperature and humidity
- MAX/MIN function
- Resolution 0.1°C, 0.1°F, 0.1%RH
-
Features- Interchangeable digital sensor probe
- Extended cable
- Fast response
- Dual display
- Audible and visual alarms
- Desk or wall mount
- MAX/MIN function
- Auto Power Off/li>
- Tilt stand
- Resolution 0.1°C, 0.1°F, 0.1%RH
-
Features- With 3 Function Buttons °C/°F, IN, OUT
- Easy Operating and Reading
- Max/Min Memory Recalling
- 1m External Wire With Probe for Outdoor Measurement
-
Features- Ideal for room, indoor and outside
- Large Dial for Easy Reading
- No Power Needed
- Temp. and Humidity display simultaneously
- Made with Stainless Frame
-
Features- Easy to read large display
- Comfort Level Index
- Dual row display
- Low battery indication
-
Features- 20 to 60°C (-4 to +140°F) temperature and 0 to 100% humidity measurement range
- Wirelessly stream and view data via WIFI on PCor FilesThruThaAir Cloud
- Easy sensor set-up using free PC software application
- View and analyze multiple sensors, including graphing of historic data
- Configurable high and low alarms with indicator
- Sensor memory stores all data even if WIFI is temporarily disconnected
-
Features- 20 to 60°C (-4 to +140°F) temperature and 0 to 100% humidity measurement range
- Wirelessly stream and view data via WIFI on PCor FilesThruThaAir Cloud
- Easy sensor set-up using free PC software application
- View and analyze multiple sensors, including graphing of historic data
- Configurable high and low alarms with indicator
- Sensor memory stores all data even if WIFI is temporarily disconnected
-
Features- -10 to +60°C (-14 to +122°F) & 0 to 100%RH measurement range
- Stores up to 7 days of data
- Powered by USB
- Real time logging
- EasyLog RT software available as a free download
- User-programmable alarm thresholds for temperature and humidity
-
Features- -35 to +80°C (-31 to +176°F) and 0 to 100%RH measurement range
- Stores over 16,000 readings for both temperature and humidity
- EasyLog software available as a free download
- Logging rates between 10 seconds and 12 hour
- Immediate and delayed logging start
- User-programmable alarm thresholds for both temperature and humidity
- Status indication via red/green LEDs
- Environmental protection to IP67
-
Features- -35 to +80°C (-31 to +176°F) and 0 to 100%RH measurement range
- Stores over 16,000 readings for both temperature and humidity
- EasyLog software available as a free download
- Logging rates between 10 seconds and 12 hour
- Immediate and delayed logging start
- User-programmable alarm thresholds for both temperature and humidity
-
Features- -35 to +80°C (-31 to +176°F) and 0 to 100%RH measurement range
- Stores over 16,000 readings for both temperature and humidity
- EasyLog software available as a free download
- Logging rates between 10 seconds and 12 hour
- Immediate and delayed logging start
- User-programmable alarm thresholds for both temperature and humidity
-
Features- -35 to +80°C (-31 to +176°F) and 0 to 100%RH measurement range
- Stores over 16,000 readings for both temperature and humidity
- EasyLog software available as a free download
- Logging rates between 10 seconds and 12 hour
- Immediate and delayed logging start
- User-programmable alarm thresholds for both temperature and humidity
- Status indication via red/green LEDs
- Environmental protection to IP67
-
Features • -18 to +55°C (-0.4 to +131°F) temperature measurement range • 0 to 100%RH humidity measurement range • 300 to 1200mbar pressure measurement range • Stores over 1,000,000 readings (As per spec table) • No software to install - configure using your normal web browser • Use with a PC or Mac • Display shows current, maximum and minimum readings • Status and alarm indicators • On-board alarm sounder • Data can be uploaded to the EasyLog Cloud -
Features- -18 to +55°C (-0.4 to +131°F) temperature measurement range
- 0 to 100%RH humidity measurement range
- Stores over 1,000,000 readings (As per spec table)
- No software to install - configure using your normal web browser
- Use with a PC or Mac
- Display shows current, maximum and minimum readings
- Status and alarm indicators
- On-board alarm sounder
- Data can be uploaded to the EasyLog Cloud
-
Features- -18 to +55°C (-0.4 to +131°F) temperature measurement range
- 0 to 100%RH humidity measurement range
- Stores over 1,000,000 readings (As per spec table)
- No software to install - configure using your normal web browser
- Use with a PC or Mac
- Display shows current, maximum and minimum readings
- Status and alarm indicators
- Data can be uploaded to the EasyLog Cloud
-
Features- -30 to 80°C (-22 to +176°F) measurement range
- Stores over 250,000 readings
- Logging rates between 10 seconds and 1 hour
- On screen menu and graphing to start, stop, review and restart the logger in the field
- Triggered logging mode to start recording data once a user defined level is met
- User-programmable audible alarm thresholds with highly visible confidence/alarm LEDs
- Environmental protection to IP67
- Higher accuracy sensor when compared with the EL-GFX-2
-
Features- -30 to 80°C (-22 to +176°F) measurement range
- Stores over 250,000 readings
- Logging rates between 10 seconds and 1 hour
- On screen menu and graphing to start, stop, review and restart the logger in the field
- Triggered logging mode to start recording data once a user defined level is met
- User-programmable audible alarm thresholds with highly visible confidence/alarm LEDs
- Environmental protection to IP67