- -30 to 80°C (-22 to +176°F) measurement range
- Stores over 250,000 readings
- Logging rates between 10 seconds and 1 hour
- On screen menu and graphing to start, stop, review and restart the logger in the field
- Triggered logging mode to start recording data once a user defined level is met
- User-programmable audible alarm thresholds with highly visible confidence/alarm LEDs
- Environmental protection to IP67
-
Features -
Features- -30 to 80°C (-22 to +176°F) measurement range
- Stores over 250,000 readings
- Logging rates between 10 seconds and 1 hour
- On screen menu and graphing to start, stop, review and restart the logger in the field
- Triggered logging mode to start recording data once a user defined level is met
- User-programmable audible alarm thresholds with highly visible confidence/alarm LEDs
- Environmental protection to IP67
- Higher accuracy sensor when compared with the EL-GFX-2
-
Features- -18 to +55°C (-0.4 to +131°F) temperature measurement range
- 0 to 100%RH humidity measurement range
- Stores over 1,000,000 readings (As per spec table)
- No software to install - configure using your normal web browser
- Use with a PC or Mac
- Display shows current, maximum and minimum readings
- Status and alarm indicators
- Data can be uploaded to the EasyLog Cloud
-
Features- -18 to +55°C (-0.4 to +131°F) temperature measurement range
- 0 to 100%RH humidity measurement range
- Stores over 1,000,000 readings (As per spec table)
- No software to install - configure using your normal web browser
- Use with a PC or Mac
- Display shows current, maximum and minimum readings
- Status and alarm indicators
- On-board alarm sounder
- Data can be uploaded to the EasyLog Cloud
-
Features • -18 to +55°C (-0.4 to +131°F) temperature measurement range • 0 to 100%RH humidity measurement range • 300 to 1200mbar pressure measurement range • Stores over 1,000,000 readings (As per spec table) • No software to install - configure using your normal web browser • Use with a PC or Mac • Display shows current, maximum and minimum readings • Status and alarm indicators • On-board alarm sounder • Data can be uploaded to the EasyLog Cloud -
Features- -35 to +80°C (-31 to +176°F) and 0 to 100%RH measurement range
- Stores over 16,000 readings for both temperature and humidity
- EasyLog software available as a free download
- Logging rates between 10 seconds and 12 hour
- Immediate and delayed logging start
- User-programmable alarm thresholds for both temperature and humidity
- Status indication via red/green LEDs
- Environmental protection to IP67
-
Features- -35 to +80°C (-31 to +176°F) and 0 to 100%RH measurement range
- Stores over 16,000 readings for both temperature and humidity
- EasyLog software available as a free download
- Logging rates between 10 seconds and 12 hour
- Immediate and delayed logging start
- User-programmable alarm thresholds for both temperature and humidity
-
Features- -35 to +80°C (-31 to +176°F) and 0 to 100%RH measurement range
- Stores over 16,000 readings for both temperature and humidity
- EasyLog software available as a free download
- Logging rates between 10 seconds and 12 hour
- Immediate and delayed logging start
- User-programmable alarm thresholds for both temperature and humidity
-
Features- -35 to +80°C (-31 to +176°F) and 0 to 100%RH measurement range
- Stores over 16,000 readings for both temperature and humidity
- EasyLog software available as a free download
- Logging rates between 10 seconds and 12 hour
- Immediate and delayed logging start
- User-programmable alarm thresholds for both temperature and humidity
- Status indication via red/green LEDs
- Environmental protection to IP67
-
Features- -10 to +60°C (-14 to +122°F) & 0 to 100%RH measurement range
- Stores up to 7 days of data
- Powered by USB
- Real time logging
- EasyLog RT software available as a free download
- User-programmable alarm thresholds for temperature and humidity
-
Features- 20 to 60°C (-4 to +140°F) temperature and 0 to 100% humidity measurement range
- Wirelessly stream and view data via WIFI on PCor FilesThruThaAir Cloud
- Easy sensor set-up using free PC software application
- View and analyze multiple sensors, including graphing of historic data
- Configurable high and low alarms with indicator
- Sensor memory stores all data even if WIFI is temporarily disconnected
-
Features- 20 to 60°C (-4 to +140°F) temperature and 0 to 100% humidity measurement range
- Wirelessly stream and view data via WIFI on PCor FilesThruThaAir Cloud
- Easy sensor set-up using free PC software application
- View and analyze multiple sensors, including graphing of historic data
- Configurable high and low alarms with indicator
- Sensor memory stores all data even if WIFI is temporarily disconnected
-
Features- Easy to read large display
- Comfort Level Index
- Dual row display
- Low battery indication
-
Features- Ideal for room, indoor and outside
- Large Dial for Easy Reading
- No Power Needed
- Temp. and Humidity display simultaneously
- Made with Stainless Frame
-
Features- With 3 Function Buttons °C/°F, IN, OUT
- Easy Operating and Reading
- Max/Min Memory Recalling
- 1m External Wire With Probe for Outdoor Measurement
-
Features- Interchangeable digital sensor probe
- Extended cable
- Fast response
- Dual display
- Audible and visual alarms
- Desk or wall mount
- MAX/MIN function
- Auto Power Off/li>
- Tilt stand
- Resolution 0.1°C, 0.1°F, 0.1%RH
-
Features- Dew point and wet bulb temperature measurement
- Fast response
- Auto Power Off
- Dual display
- Dual display for temperature and humidity
- MAX/MIN function
- Resolution 0.1°C, 0.1°F, 0.1%RH
-
Features- Displays %RH and temperature, plus dew point, absolute humidity and wet bulb temperature
- Simple to operate
- Long term stability: ±1% RH over 12 months
-
Main Function- Humidification/dehumidification output
- High/Low alarm output
- Min. on/off maintaining time setup
- Selection on/off output when sensor error occurs
- Sensor correction
- Sensor error detection
- Selection of displaying decimal point
-
Features- Humidification (heating)
- Dehumidification (cooling) output
- High/Low alarm output
- Min. on/off maintaining time setup
- Selection on/off output when sensor error occurs
- Sensor correction
- Sensor error detection
- Relay output manual control
- Transmission output
- RS485 communication (MODBUS)
-
Features- Rapid spot-check measurements to –50°Cdp
- T95 to –35°C dew point in <10 minutes
- Simple operation
- Integral sampling system
- Industrial case
- ±2°Cdp accuracy
- 9-point traceable calibration
- 16 hours of operation between charges
-
Features- Wide measurement range
- Simple operation
- Integral sampling system
- Rugged industrial case
- ±2°Cdp (±3.6°F) accuracy
- Traceable to National Standards
- 16 hours of operation between charges
- Lowest cost of ownership due to minimal maintenance
-
Features- Repeatedly fast measurements at low pressure in less than 15 minutes for T95 down to -60°C dew point (-76°F dew point)
- Higher pressure measurements possible - up to 35 MPa (350 barg / 5076 psig)
- Long battery life: up to 48 hours of typical use between charges
- Intuitive application kits allow quick and straightforward connection to your sample point
- Durable, yet easy to handle and operate: designed for use in industrial environments
- Lightweight: less than 1.5kg (3.31lbs)
- 13 point traceable calibration certificate
-
Features- Dew point or PPMV moisture content
- -100 to +20°C (-148 to +68°F) dew point range
- Fast response
- Analog and digital outputs
- Dual alarms
- Easy to read display
- Excellent sensor protection
- NEMA 4 Transmitter, NEMA 12 Monitor (front panel only)
-
Features- Wide measurement range, calibrated -100 to +20°C dew point (-148 to +68°F)
- ±1°C dew point measurement accuracy (±1.8°F)
- Analog and digital output
- Pressure sensor input
- Up to 4 alarm relays
- User selectable units of measure
- Easy to read display
-
Best-selling hygro-thermograph recorder equipped with an electronic sensor. Features- Easy-to-read digital display
- Up to 6 months continuous recording on chart paper...
- Long-term stable measurement
- Sensor cable extension
- User calibration
- Environmentally friendly product
-
Best-selling ST-50 series hygro-thermograph recorder equipped with an electronic sensor. Features- Important measurement records can be backed up in CSV format.
- Up to 6 months record on chart paper
- Data can be saved to a memory card (SD card)
- Long term recording
- Long-term stability, wide range measurement
- Sensor cable extension
-
Features- Digital sensor applied for MEMS technology
- Embedded RS485 communication port based on MODBUS RTU/ASCII
- Excellent long term stability and self-digital correction
- Quick counter reaction speed (within 4 second)
- Slim size - 310(L) x 280(H) x 45(D) mm
-
Features- Measures temperature and humidity
- With coloured comfort-level zones for a healthy room climate
- Max.- Min. memory with manual and automatic reset
- Very accurate with precision sensor
- Backlight, stainless steel frame
-
Features- Easy to read
- Accurate product with inexpensive price
- Attractive finish glass front
- Light weight
- No battery requirement
- Easy wall mounting
-
Features- Continuous measurement and display of temperature and relative humidity
- Calculation and display of the dew point
- Large, clear display
- Durable quality: capacitive humidity sensor with long-term stability for many years of measurement
-
Features- Calendar and clock function : display hour, minute, date, month, weekday and 12/24 hour system.
- Temperature measuring range : -9.9°C ~ +50°C (or +14°F ~ +122°F).
- Humidity measuring range : 20%RH ~ 95%RH.
- Alarm clock with snooze function.
- Count down timer range : 0:00 ~ 23 hours 59 minutes.
- °F and °C temperature switch function.
- Three icons for comfort level indicator of indoor climate.
- Use the nail or screw to hang the clock on the wall
-
Features- Monitoring of indoor temperature and Humidity
- For a Healthy indoor climate
- Maximum/ Minimum Values
- Display time, date and alarm
- Backlight function
-
Features- Large screen LED thermohygrometer.
- High precision and recording function (optional).
- Fast response.
- Appearance: Wall mounted
- Resolution: Temperature 0.1˚C; Humidity 0.1% RH
- Optional external alarm device available (Code: A01)
-
Features- Visual Range Up to 20 Meters
- High Accuracy
- Display temperature and humidity
- Reliable and stable sensors
- Calibration Function
- External Power and Wall Hanging
- Optional Accessories: Light, Sound, GSM Alarms
- PC Software ToMonitor + ToClient Software Management System
- 4 keys, could set deviation, Set upper and lower limits of the alarm
-
Feature- Dual Beam NDIR technology is used to measure CO2 concentration
- Audible Alarm
- Data Logging with SD Card
- RS485 Communication Interface
- Rechargeable Battery