- Accuracy to 0.01% of reading
- Small and rugged handheld design
- Measure, source, or simulate loop current
- Measure DC volts
- Simultaneously mA and % span display
- Switch functionality
- Selectable ramp and step functions
- Easy to read display and user interface
- HART 250Ω resistor in series with 24V loop
-
Features -
Features- Portable, only 5.7 lb
- Great stability and high resolution
- Minimal maintenance
- Hand-tight quick connectors
-
Features- Generate 3,000 psi (200 bar) in 40 seconds
- Minimal maintenance
- Hand-tight quick connectors
- First one in the world
-
Features- Portable, only 3.3 lb
- Great stability and high resolution
- Minimal maintenance
- Hand-tight quick connectors
-
Features- Portable, only 5.9 lb
- Great stability and high resolution
- Minimal maintenance
- Hand-tight quick connectors
-
Features- Portable, only 5.7 lb
- Great stability and high resolution
- Minimal maintenance
- Hand-tight quick connectors
-
Features- Generate 2000 psi (140 bar) in 30 seconds
- Minimal maintenance
- Hand-tight quick connectors
- First one in the world
-
Features • Portable, only 7 lb • Minimal maintenance • Increase and decrease pressure smoothly • Hand-tight quick connectors Applications The Additel 927 is designed to generate pressure from 85% vacuum to 10,000 psi (700 bar) for the application requiring accurate pressure testing and calibration. It can be used in calibrating pressure gauges, transmitters, or other pressure measuring instruments. -
Features • Compatible to phosphoric acid ester fluid and Skydrol Oil • Increase and decrease pressure smoothly • Three pressure ports • Hand-tight quick connectors Applications The Additel 937 is designed to generate pressure from 85% vacuum to 15,000 psi (1000 bar) for the application requiring accurate pressure testing and calibration. It can be used in calibrating pressure gauges, transmitters, or other pressure measuring instruments. -
Features- Pressurize large-volume workload
- Generate pressure to 15,000 psi (1,000 bar)
- Increase and decrease pressure smoothly
- Three pressure ports
- Hand-tight quick connectors
-
Features- Pressurize large-volume workload
- Generate pressure to 40,000 psi (2,800 bar) pressure
- Increase and decrease pressure smoothly
- Three pressure ports
-
Features • 1/4NPT male to various connectors as follows (Designed for all pumps except Additel 949 ,959,960 pumps) -
ADT103-NPT Adapter and Fitting, 1/4" NPT male to various female hand-tight quick connectors (10 pc). ADT103-BSP Adapter and Fitting, 1/4"BSP male to various female hand-tight quick connectors (10 pc). ADT103-M20 Adapter and Fitting, M20X1.5 male to various female hand-tight quick connectors (10 pc). (Designed for all pumps except Additel 949 pump) -
ADT104-HP 1/4HP male (Autoclave M-250-C) to various connectors as follows (17 pc, case included): (Designed for Additel 949, 959, and 960 pumps) -
Features- °F/°C selectable
- Min/Max memory stores lowest/highest readings
- Automatic calibration feature
- IP65 Waterproof
- Reduced Tip Probe
- Complies with FDA Food Code 4-203.11
-
Features- NSF certified
- °F/°C selectable
- Min/Max memory stores lowest/highest readings
- Automatic calibration feature
- IP65 Waterproof housing
- Small-diameter probe ideal for measuring temperature of "thin mass" food such as meat patties and chicken/fish fillets (FDA Food Code 4-302.12 (B).
-
Features- Dual Input
- Dual Display
- Auto Powe Off
- RS-232 Interface
- REL Function
- HOLD Function
- MAX AVG MIN Function
- Resolution 0.1°C 0.1°F
- Low Battery Indication
-
Features- Dual Input
- Triple Display
- Time Function
- RS-232 Interface
- With Window Software
- 16,000 Records Data logger
- Auto Power Off
- REL Function
- MAX MIN Function
- Resolution 0.1°C 0.1°F
- Low Battery Indication
-
Features- Auto Range
- PC Interface
- LED Backlight
- HOLD Function
- Four Channel Input
- Four Channel Display
- Resolution 0.1°C 0.1°F
- With Windows Software
- MAX MIN Function
- Auto Shut Off for battery saving
- 16,000 Records Data logger each channel
-
Features- Measuring Range : -200 to +1772°C
- High Accuracy and Fast Response
- Digital LCD Display with Back-Light
- Records Max./Min. Values
- RS-232 Signal Output
- CE and ROHS Approved
-
Features- High Resolution 0.01 (-200.00 ~ + 1372.00°C)
- Dual Type K (CA) input
- P66 Water-Proof
- USB / RS-232 Output
- High / Low Alarm
- T1-T2 / Max. / Min. / Avg.
- Large Display LED Back-Light
-
Feature- High Resolution : 0.01°
- IP66 Water-Proof
- Accept PT100 and PT1000Ω Input
- Dual Probes (T1-T2)
- Large LCD Display with LED Back-Light
- Hold / Max. / Min. / Average
- High / Low Alarm Setting
- USB / RS-232 Output
- CE and RoHS Approved
-
Features- K.J.E.T.N.R.S.B Eight Types Available
- Concise Buttons and Operation Interface
- Carry Out Simple and Durable Principles
- Very Practical and Low Prices
- Fast Response and High Accuracy
- RS-232 Signal Output
- CE and RoHS Approved
-
Features- IP66 Water-Proof
- Accept 9 T/C Types
- Dual Probes (T1-T2)
- Data-Logger Built-In
- USB/RS-232 Output, with Software
- Fine Adjustment Function
- Hi/Lo Alarm
- Max./Min./Avg./Hold
- LED Back-Light
- CE and RoHS Approved
-
- Lightweight, compact, 2-in-1 design
- Thermocouple probe for internal product temperature
- Infrared for instant non-contact surface measurement
- Multi-beam laser for accurate targeting
- Ideal for extremely hot areas, moving objects, hard to reach places
- Green backlight indicates HACCP food safety zone
- Red backlight indicates HACCP danger zone
- Min/Max memory in IR mode
- NSF Certified, NIST traceable
- Fast 3 second thermocouple reading
- Instant infrared reading
- Low battery indicator
-
Main Function- Heating / cooling output
- Independent timer output
- High / Low alarm output
- Defrost output
- Precise temperature control
- Sensor correction
- Sensor error detection
- Data back up
- Minimum on/off maintaining time setup
- RS485 communication (MODBUS)
- Transmission output
- Auto-output operation cycle settable in case of sensor error
-
Main Function- Heating / cooling output
- Independent timer output
- High / Low alarm output
- Defrost output
- Precise temperature control
- Sensor correction
- Sensor error detection
- Data back up
- Minimum on/off maintaining time setup
- RS485 communication (MODBUS)
- Transmission output
- Auto-output operation cycle settable in case of sensor error
-
Main Function- Heating / cooling output
- High / Low alarm output
- Precise temperature control
- Sensor correction
- Sensor error detection
- Data back up
- Minimum on/off maintaining time setup
- RS485 communication (MODBUS)
- Transmission output
-
Main Function- Heating / cooling output
- Precise temperature control
- Sensor correction
- Sensor error detection
- Data back up
- Minimum on/off maintaining time setup
- Auto-output operation cycle settable in case of sensor error
-
Main Function- Heating/cooling output
- High / Low alarm output
- Precise temperature control.
- Sensor correction, sensor error detection
- Sensor error detection
- Data backup
- Min. on/off maintaining time setup
- Transmission output
- RS485 communication (MODBUS)
-
Main Function- Heating / cooling output
- Independent timer output
- High / Low alarm output
- Precise temperature control
- Sensor correction
- Sensor error detection
- Data back up
- Minimum on/off maintaining time setup
- RS485 communication (MODBUS)
- Transmission output
-
Main Function- Total control and detection (protection) for freezers
- Function of start, restart, pump down, alarm delay timer
- Discharge gas detection (high & low temperature)
- Individual alarm message (OC, HP, LP, OP, INT)
- RS485 communication (MODBUS)
-
Main Function- PID degree of superheat control through defense and safety compensation
- Degree of superheat control for various refrigerant
- PMW (opening ratios control)
- Remote operation
- Transmission output
- RS485 communication (MODBUS)
-
Main Function- Defrosting (auto / manual)
- Fan control
- Efficient delay
- Room temperature sensor: 1EA
- Defrost sensor: 1EA
- High (low) temperature alarm output
- Room temperature transmission output (4~20 mA)
- RS485 communication (MODBUS)
-
Main Function- Efficient defrosting in geothermy heat pump system
- Defrosting execution by measuring of ambient humidity and temperature
-
Main Function- Uniform step control
- Operation with intelligent shift high / low alarm output
- Sensor correction / Sensor error detection
- Transmission output
- RS485 communication (MODBUS)
-
Main Function- Defrosting (auto / manual)
- Defrosting stop delay
- Evaporation fan control
- Air inlet/outlet sensor: 2EA
- Defrost recovery sensor: 1EA
- Virtual temperature sensor computing
- Door open alarm
- Emergency call
- Night operation
- High (low) temperature alarm output
- RS485 communication (MODBUS)
-
Main Function- Defrosting (auto / manual)
- Defrosting stop delay
- 2 air inlet/outlet sensors
- One sensor for defrost recovery
- High / Low alarm output
- Indicator (FixView) connection
- RS485 communication (MODBUS)
-
Main Function- Embedded run/stop switch, motor on/off, load run, auto-stop, manual stop, operation delay, load delay, embedded timer
- Pressure / temperature high level
- Temperature low level (standby for starting)
- Interlock input signal (emergency switch, OCR reverse phase)
- Usable thermometer and manometer
- RS485 communication (MODBUS)
-
Main Function- Embedded run/stop switch, motor on/off, load run, auto-stop, manual stop, operation delay, load delay, embedded timer
- Pressure / temperature high level
- Temperature low level (standby for starting)
- Interlock input signal (emergency switch, OCR reverse phase)
- Usable thermometer and manometer
- RS485 communication (MODBUS)
-
Main Function- 3 stage fan speed controllable
- 4 kind (stop / high / middle / low) airflow choosable
- Unification of temperature control function
- Data backup
- Self diagnostic
- RS485 communication (MODBUS)
-
Main Function- Output controllable based on measured pressure value (increase and decrease)
- Alternative operation available between freezing exclusive model and booster
- Pump unit control model
- RS485 MODBUS
-
Features- -30 to 80°C (-22 to +176°F) measurement range
- Stores over 250,000 readings
- Logging rates between 10 seconds and 1 hour
- On screen menu and graphing to start, stop, review and restart the logger in the field
- Triggered logging mode to start recording data once a user defined level is met
- User-programmable audible alarm thresholds with highly visible confidence/alarm LEDs
- Environmental protection to IP67
-
Features- -30 to 80°C (-22 to +176°F) measurement range
- Stores over 250,000 readings
- Logging rates between 10 seconds and 1 hour
- On screen menu and graphing to start, stop, review and restart the logger in the field
- Triggered logging mode to start recording data once a user defined level is met
- User-programmable audible alarm thresholds with highly visible confidence/alarm LEDs
- Environmental protection to IP67
- Higher accuracy sensor when compared with the EL-GFX-2
-
Features- -18 to +55°C (-0.4 to +131°F) temperature measurement range
- 0 to 100%RH humidity measurement range
- Stores over 1,000,000 readings (As per spec table)
- No software to install - configure using your normal web browser
- Use with a PC or Mac
- Display shows current, maximum and minimum readings
- Status and alarm indicators
- Data can be uploaded to the EasyLog Cloud
-
Features- -18 to +55°C (-0.4 to +131°F) temperature measurement range
- 0 to 100%RH humidity measurement range
- Stores over 1,000,000 readings (As per spec table)
- No software to install - configure using your normal web browser
- Use with a PC or Mac
- Display shows current, maximum and minimum readings
- Status and alarm indicators
- On-board alarm sounder
- Data can be uploaded to the EasyLog Cloud
-
Features • -18 to +55°C (-0.4 to +131°F) temperature measurement range • 0 to 100%RH humidity measurement range • 300 to 1200mbar pressure measurement range • Stores over 1,000,000 readings (As per spec table) • No software to install - configure using your normal web browser • Use with a PC or Mac • Display shows current, maximum and minimum readings • Status and alarm indicators • On-board alarm sounder • Data can be uploaded to the EasyLog Cloud -
Features- -35 to +80°C (-31 to +176°F) and 0 to 100%RH measurement range
- Stores over 16,000 readings for both temperature and humidity
- EasyLog software available as a free download
- Logging rates between 10 seconds and 12 hour
- Immediate and delayed logging start
- User-programmable alarm thresholds for both temperature and humidity
- Status indication via red/green LEDs
- Environmental protection to IP67
-
Features- -35 to +80°C (-31 to +176°F) and 0 to 100%RH measurement range
- Stores over 16,000 readings for both temperature and humidity
- EasyLog software available as a free download
- Logging rates between 10 seconds and 12 hour
- Immediate and delayed logging start
- User-programmable alarm thresholds for both temperature and humidity
-
Features- -35 to +80°C (-31 to +176°F) and 0 to 100%RH measurement range
- Stores over 16,000 readings for both temperature and humidity
- EasyLog software available as a free download
- Logging rates between 10 seconds and 12 hour
- Immediate and delayed logging start
- User-programmable alarm thresholds for both temperature and humidity
-
Features- -35 to +80°C (-31 to +176°F) and 0 to 100%RH measurement range
- Stores over 16,000 readings for both temperature and humidity
- EasyLog software available as a free download
- Logging rates between 10 seconds and 12 hour
- Immediate and delayed logging start
- User-programmable alarm thresholds for both temperature and humidity
- Status indication via red/green LEDs
- Environmental protection to IP67
-
Features- -10 to +60°C (-14 to +122°F) & 0 to 100%RH measurement range
- Stores up to 7 days of data
- Powered by USB
- Real time logging
- EasyLog RT software available as a free download
- User-programmable alarm thresholds for temperature and humidity
-
Features- 20 to 60°C (-4 to +140°F) temperature and 0 to 100% humidity measurement range
- Wirelessly stream and view data via WIFI on PCor FilesThruThaAir Cloud
- Easy sensor set-up using free PC software application
- View and analyze multiple sensors, including graphing of historic data
- Configurable high and low alarms with indicator
- Sensor memory stores all data even if WIFI is temporarily disconnected
-
Features- 20 to 60°C (-4 to +140°F) temperature and 0 to 100% humidity measurement range
- Wirelessly stream and view data via WIFI on PCor FilesThruThaAir Cloud
- Easy sensor set-up using free PC software application
- View and analyze multiple sensors, including graphing of historic data
- Configurable high and low alarms with indicator
- Sensor memory stores all data even if WIFI is temporarily disconnected
-
Characteristics:- Stainless steel sensor, welded
- Accuracy 0.5 % FSO according to IEC 60770
- nominal pressure ranges from 0 … 6 bar up to 0 … 600 bar
-
Characteristics- Stainless steel sensor, welded
- Accuracy 0.5 % FSO according to IEC 60770
- Nominal pressure ranges from 0 … 6 bar up to 0 … 60 bar and -1 … 6 bar up to -1 … 60 bar
-
Characteristics:- Stainless steel sensor, welded
- Nominal pressure ranges from 0 … 16 bar up to 0 … 1000 bar
- Accuracy according to IEC 60770: 0.5 % FSO
-
Characteristics- Silicon sensor without media isolation
- Accuracy 0.5 % FSO according to IEC 60770
- Nominal pressure ranges from 0 … 100 mbar up to 0 … 6 bar
-
Characteristics- Piezoresistive stainless steel sensor
- Accuracy 0.5 % FSO according to IEC 60770
- Nominal pressure ranges from 0 … 100 mbar up to 0 … 6 bar
-
Characteristics- Piezoresistive stainless steel sensor
- Accuracy 0.5 % FSO according to IEC 60770
- Nominal pressure ranges from 0 … 1 mH2O up to 0 … 10 mH2O
-
Characteristics- Ceramic sensor
- Accuracy 0.5 % FSO according to IEC 60770
- Nominal pressure ranges from 0 … 1 bar up to 0 … 400 bar
- Option: oil and grease free version
-
Characteristics- Ceramic sensor
- Accuracy 1 % FSO according to IEC 60770
- Nominal pressure ranges from 0 … 1.6 bar up to 0 … 250 bar
-
Characteristics- Stainless Steel Sensor
- Accuracy according to IEC 60770:
- Standard: 0.25 % FSO
- Option: 0.1 % FSO
-
Characteristics- Stainless Steel Sensor
- Accuracy according to IEC 60770:
- Standard: ≤ ± 0.35 % FSO
- Option: ≤ ± 0.25 % FSO
-
Characteristics- Stainless Steel Sensor
- Accuracy according to IEC 60770: standard: ≤ ± 0.35 % FSO option: ≤ ± 0.25 % FSO
-
Characteristics- Ceramic Sensor
- Accuracy according to IEC 60770: 0.5 % FSO
-
Characteristics- Ceramic Sensor
- Accuracy according to IEC 60770: 0.5 % FSO
-
Characteristics- Ceramic Sensor
- Accuracy according to IEC 60770: 0.5 % FSO
-
Characteristics- Pressure Ports with Flush Welded Stainless Steel Diaphragm
- Accuracy according to IEC 60770: 0.5 % FSO
-
Characteristics- Nominal pressure from 0...40 mbar Up To 20 Bar
- Ceramic Sensor, Flush, Hygienical Application
- Accuracy according to IEC 60770: Standard: 0.35 % FSO Option: 0.25 % FSO
-
Characteristics- Ceramic Sensor, Marine, Shipbuilding, Offshore,
- Nominal pressure range from 0...400 mbar Up To 600 Bar
- Accuracy according to IEC 60770: 0.5 % FSO
-
Characteristics- Ceramic Sensor
- Accuracy according to IEC 60770: Standard: 0.25 % FSO Option: 0.1 % FSO