- Identify complex signal problems fast
- Supports accurate measurements on VFDs using a low-pass filter
- Captures intermittents as fast as 250 µS with Peak Capture
-
Features -
Features- One pair (red, black) comfort grip probes with silicone insulated, right-angle test leads
- Recommended for µV measurements
- CAT II 1000 V, 10 A rating
- CAT III 1000 V, CAT IV 600V only with protective cap
-
Features- Measurement accuracy 1%
- Converter IP rating IP 67, transducer IP rating IP 68
- Wide measurement range, pipe size from DN15 mm to DN6000 mm
- Connect the temperature transducer can finish the heat / energy measurement
-
Main Function- Embedded run/stop switch, motor on/off, load run, auto-stop, manual stop, operation delay, load delay, embedded timer
- Pressure / temperature high level
- Temperature low level (standby for starting)
- Interlock input signal (emergency switch, OCR reverse phase)
- Usable thermometer and manometer
- RS485 communication (MODBUS)
-
Main Function- Embedded run/stop switch, motor on/off, load run, auto-stop, manual stop, operation delay, load delay, embedded timer
- Pressure / temperature high level
- Temperature low level (standby for starting)
- Interlock input signal (emergency switch, OCR reverse phase)
- Usable thermometer and manometer
- RS485 communication (MODBUS)
-
Main Function- Total control and detection (protection) for freezers
- Function of start, restart, pump down, alarm delay timer
- Discharge gas detection (high & low temperature)
- Individual alarm message (OC, HP, LP, OP, INT)
- RS485 communication (MODBUS)
-
Main Function- PID degree of superheat control through defense and safety compensation
- Degree of superheat control for various refrigerant
- PMW (opening ratios control)
- Remote operation
- Transmission output
- RS485 communication (MODBUS)
-
Main Function- 3 stage fan speed controllable
- 4 kind (stop / high / middle / low) airflow choosable
- Unification of temperature control function
- Data backup
- Self diagnostic
- RS485 communication (MODBUS)
-
Main Function- Defrosting (auto / manual)
- Fan control
- Efficient delay
- Room temperature sensor: 1EA
- Defrost sensor: 1EA
- High (low) temperature alarm output
- Room temperature transmission output (4~20 mA)
- RS485 communication (MODBUS)
-
Main Function- Efficient defrosting in geothermy heat pump system
- Defrosting execution by measuring of ambient humidity and temperature
-
Main Function- Output controllable based on measured pressure value (increase and decrease)
- Alternative operation available between freezing exclusive model and booster
- Pump unit control model
- RS485 MODBUS
-
Main Function- Uniform step control
- Operation with intelligent shift high / low alarm output
- Sensor correction / Sensor error detection
- Transmission output
- RS485 communication (MODBUS)
-
Main Function- Defrosting (auto / manual)
- Defrosting stop delay
- Evaporation fan control
- Air inlet/outlet sensor: 2EA
- Defrost recovery sensor: 1EA
- Virtual temperature sensor computing
- Door open alarm
- Emergency call
- Night operation
- High (low) temperature alarm output
- RS485 communication (MODBUS)
-
Main Function- Defrosting (auto / manual)
- Defrosting stop delay
- 2 air inlet/outlet sensors
- One sensor for defrost recovery
- High / Low alarm output
- Indicator (FixView) connection
- RS485 communication (MODBUS)
-
Main Function- Heating / cooling output
- Independent timer output
- High / Low alarm output
- Defrost output
- Precise temperature control
- Sensor correction
- Sensor error detection
- Data back up
- Minimum on/off maintaining time setup
- RS485 communication (MODBUS)
- Transmission output
- Auto-output operation cycle settable in case of sensor error
-
Features- Humidification (heating)
- Dehumidification (cooling) output
- High/Low alarm output
- Min. on/off maintaining time setup
- Selection on/off output when sensor error occurs
- Sensor correction
- Sensor error detection
- Relay output manual control
- Transmission output
- RS485 communication (MODBUS)
-
Main Function- Heating / cooling output
- Independent timer output
- High / Low alarm output
- Defrost output
- Precise temperature control
- Sensor correction
- Sensor error detection
- Data back up
- Minimum on/off maintaining time setup
- RS485 communication (MODBUS)
- Transmission output
- Auto-output operation cycle settable in case of sensor error
-
Main Function- Humidification/dehumidification output
- High/Low alarm output
- Min. on/off maintaining time setup
- Selection on/off output when sensor error occurs
- Sensor correction
- Sensor error detection
- Selection of displaying decimal point
-
Main Function- Heating / cooling output
- High / Low alarm output
- Precise temperature control
- Sensor correction
- Sensor error detection
- Data back up
- Minimum on/off maintaining time setup
- RS485 communication (MODBUS)
- Transmission output
-
Main Function- Heating / cooling output
- Precise temperature control
- Sensor correction
- Sensor error detection
- Data back up
- Minimum on/off maintaining time setup
- Auto-output operation cycle settable in case of sensor error
-
Main Function- Heating/cooling output
- High / Low alarm output
- Precise temperature control.
- Sensor correction, sensor error detection
- Sensor error detection
- Data backup
- Min. on/off maintaining time setup
- Transmission output
- RS485 communication (MODBUS)
-
Main Function- Heating / cooling output
- Independent timer output
- High / Low alarm output
- Precise temperature control
- Sensor correction
- Sensor error detection
- Data back up
- Minimum on/off maintaining time setup
- RS485 communication (MODBUS)
- Transmission output
-
Features- Uses a multi-fin, centrifugal level vertical heat exchange circulation system; ventilation rate can be adjusted to the desired rate.
- Internal rotating pan can be convenient removed and installed, the motor rotating speed of hang shelf is 8-10 rpm.
- A digital watt/hour meter and timer can be used to present the air refresh rate.
-
Features- Panel Dimension: 1.5" - 3.4"; 14.1" - 42"
- CLCD-9700 Color touch panel controller was made in Japan
- Forced air in and out to control the loading of specimen
- Wider viewing glass design and have a connecting to safety protection device
- Easily changed design as your product changes
-
Features- Two optional sampling methods: diffusion or pump aspiration
- User-friendly meter with multilingual user interface
- Numerical and graphical display of measurements
- Data can be logged and transferred to PC via MI70 Link software
- Multiprobe operation: Vaisala’s relative humidity and dew point probes can be used simultaneously with CO2 measurement
-
Features- Measured parameters: carbon dioxide, temperature, and humidity (optional)
- Superior long-term stability with the latest-generation Vaisala CARBOCAPâ sensor
- Accurate temperature and humidity measurements due to the low-power microglow infrared source
- Quick and easy installation and maintenance
- Calibrated, user-exchangeable measurement modules
- 23-point traceable CO2 calibration (certification included)
- Both analog and field bus communication (Modbusâ RTU)
-
Features- Adopt computerized electronic digital control, precise & reliable.
- The packing of box insulation is molded by silicone, high-temperature enduring & never aged attached with observation view window, easy to be used
- Heating is by compulsory circulating ventilation, temperature raising is fast and spread even
- Provide the P.I.D control system, double sided overheating protection, safe & reliable.
- Easy to set temperature, easier to operate
- Attached with two sets of moveable disks to be adjusted high and low at your dispel
-
Features- Made entirely of P.P & PVC, resistant to acids, bases and heat. It can be used with salt spray acetic acid, or any other testing material.
- Patented nozzle and conical dispersion unit ensure even spraying rate
- It can be controlled manually, or for up 9,991 hours of operation
- At the end of the experiment, a defogger automatically cleans the inside of the testing chamber for specimen.
- Three set temperature controlling systems of air-tank temperature, test area temperature, solution temperature. To make sure the correctness amd standard of the testing.
-
Features- T-Bar Design
- 1-Second Measuring Interval
- Max. - Min. Function
- Auto Off-Function
- Water-Tight
- Protective cover and pocket clips included
-
Features- System capacity: It could sign in 150 programs x 1500 partitions, partitions can be optionally divided and program can link up to each other.
- Loop configuration: 9999 x 999 looping time, can be divided into 5 independent sub-loops
- Output: Intelligent PID + SSR/ SCR two-way synchronous output, built-in advanced slope control logic
- Data: Touch panel dialogue box display, easy operation, built-in managemnet system of data content
- Curves drawing: When temperature, humidity and times are set up, the data can be immediately transferred into curves, actual operating curves can be attained during operations
-
Features- On desk design affords small volume with occupying space
- All programmed instructions are microprocessor-controlled. with PID and automatic calculation to ensure precise and stable temperature and humidity control.
- In the case of thermostat breakdown, a warning light switches on and temperature setting is changed to standard
- Heat is evenly distributed throughout the testing chamber to ensure a uniform testing temperature
-
Features- The design mode of these sets is one body affords convenient application and less space occupation.
- It can separately test high temperature and constant temperature and humidity.
- All systems are individual and independent. The three sets type of the refrigstion system and three sets of the type heating and humidifying systems are adopted. The three set type systems afford stable control and high accuracy, prolonging the service life machine parts.
- All programmed instructions are microprocessor-controlled, with PID and automatic calculation to ensure precise and stable temperature and humidity control.
-
Features- This equipment features independent systems with vibration control and cross-temperature and cross-humidity controls. It can be set to test and display results for high temperatures, low temperatures, cross temperatures and humidity and vibration, either individually or at the same time.
- Moveable guide rails for easy testing separately or simultaneously.
- Large LCD display in Chinese or English plus 100-program memory and standard RS-232C computer interface.
-
Features- 2-Zone/ 3-Zone Stationary Specimen, Exposure By Cooling Air/ Hot Air Changeover.
- The machine is divide into three sections: the high temperature chamber, the low temperature chamber and the testing chamber.
- The color touch panel control system was made in Japan can display Chinese / English. The big size liquid-crystal LCD (320X240) has been adopted.
- High formula memory capacity may be set to 100 patterns. the maximum cycle setting is 9999 cycles. The maximum setting of each section is 999Hrs 59Mins.
- Provided with RS-232C communication interface device, capable of controlling/ editing/ editing recording in line linkage with the computer and two set dynamic connection point (TIMER SIGNAL REPLAY) and convenient application.
-
Features- Strong counter-rotating mixture of high and low temperatures.
- Features automatic positioning in both horizontal and vertical axes, plus pre warming, pre-cooling and recording of shock results.
- Uses the Garden DO2ts heating oil in hot and cold chambers to minimize the costs of oil changes.
- Large LCD (320 x 240 dots) with Chinese / English display of temperatures, with programmable mini-computer control system.
- This system is suitable for on-site use with choice of water cooling or air cooling.
-
Features- Stainless steel #304 interior and painted galvanized steel exterior for long life and beautiful appearance.
- Fitting the large number or volume testing.
- Power all linking control to provide the best safety.
- The internal volume may be randomly enlarged and contracted which design is depending on the environmental requirement of the user.
- And the move would be many fast when customer want to changer to another factory
- Adopt the Japanese Micro-Computer control system of English/ Chinese display with big size LCD (320*240 dots(. High function and simple to operate.
- Provide with RS-232 communication interface device, capable of linking with a computer to control, edit, record, and connect timer signal delay
-
Features- Visual Range Up to 20 Meters
- High Accuracy
- Display temperature and humidity
- Reliable and stable sensors
- Calibration Function
- External Power and Wall Hanging
- Optional Accessories: Light, Sound, GSM Alarms
- PC Software ToMonitor + ToClient Software Management System
- 4 keys, could set deviation, Set upper and lower limits of the alarm
-
Features- Large screen LED thermohygrometer.
- High precision and recording function (optional).
- Fast response.
- Appearance: Wall mounted
- Resolution: Temperature 0.1˚C; Humidity 0.1% RH
- Optional external alarm device available (Code: A01)
-
Features- Compact size
- RH accuracy up to ±1.0 %RH
- Temperature accuracy up to ±0.2 °C (0.36 °F)
- Temperature measurement range −40 … +60 °C (−40 … +140 °F)
- Chemical purge provides superior chemical resistance
- Modbus RTU over RS-485
- Compatible with Indigo series transmitters and Insight PC software
- Traceable calibration certificate: 6 points for humidity, 1 point for temperature
-
Features- Available with field replaceable HUMICAP R2 sensor
- RH accuracy up to 0.8 %RH
- Temperature accuracy up to 0.1 °C (0.18 °F)
- Temperature measurement range −40 … +120 °C (−40 … +248 °F)
- Modbus RTU over RS-485
- Compatible with Indigo series transmitters and Insight PC software
-
Features- RH accuracy up to 0.8 %RH, Temperature accuracy up to 0.1 °C (0.18 °F)
- Temperature measurement range -70 ... +180 °C (-94 ... +356 °F)
- Operating pressure 0 ... 10 MPa (0 ... 100 bar)
- Sensor purge provides superior chemical resistance
- Modbus RTU over RS-485
- Plug & play compatible with Indigo series of transmitters
- Traceable calibration certificate: 5 points for humidity, 1 point for temperature
-
Features- RH accuracy up to 0.8 %RH, Temperature accuracy up to 0.1 °C (0.18 °F)
- Temperature measurement range -70 ... +180 °C (-94 ... +356 °F)
- 250 mm (9.84 in) probe allows easy process installation through insulation
- Sensor purge provides superior chemical resistance
- Modbus RTU over RS-485
- Plug & play compatible with Indigo series of transmitters
- Traceable calibration certificate: 5 points for humidity, 1 point for temperature
- Sintered AISI316L filter standard in delivery
-
Features- RH accuracy up to 0.8 %RH, Temperature accuracy up to 0.1 °C (0.18 °F)
- Temperature measurement range -70 ... +180 °C (-94 ... +356 °F)
- Vapor and pressure proof construction
- Probe and sensor warming functions minimize condensation on probe
- Sensor purge provides superior chemical resistance
- Plug & play compatible with Indigo series of transmitters
- Modbus RTU over RS-485
- Traceable calibration certificate: 6 points for humidity, 1 point for temperature
-
Features- Miniature probe head with low thermal mass for superior response time
- RH accuracy up to 0.8 %RH
- Temperature accuracy up to 0.1 °C (0.18 °F)
- Temperature measurement range −40 … +120 °C (−40 … +248 °F)
- Sensor purge provides superior chemical resistance
- Modbus RTU over RS-485
- Compatible with Indigo transmitters and Insight PC software
- Traceable calibration certificate: 6 points for humidity, 1 point for temperature
- M10×1.5 cable gland included for mounting the probe head
-
Features-
Six models for demanding industrial applications
-
Full 0 ... 100 %RH measurement, wide temperature range -40...+180 °C (-40...+356 °F)
-
Pressure tolerance up to 100 bar
-
Excellent performance in harsh conditions; good chemical tolerance
-
Corrosion-resistant IP65/IP66 housing
-
5-point calibration (certificate included)
-
Two analog outputs, calibrated (certificate included)
-
RS232, ASCII output
-
-
Features- Intrinsically safe (Exi) for operation in up to Zone 0 / 20
- Measures RH and T and outputs an extensive range of calculated parameters: for a full list, see Technical data (page 5).
- Designed for harsh conditions
- Temperature range between −70 … +180 °C (−94 … +356 °F) depending on the probe option
- Vaisala HUMICAP sensor features high accuracy, excellent long-term stability, and negligible hysteresis
- Display options: graphical LCD display and non-display model
- Traceable calibration (certificate included)
- Compatible with Vaisala Insight PC software
-
Features- Small size for mobile use
- Automatic temperature compensation
- High resolution of the scale areas
- Robust and compact design
- Easy calibration and adjustment
-
Application • Beverages • Food • Sugar / sweeteners • Chemicals • Flavours • Petrochemicals • Cosmetics / hygiene • Metalworking • Pharmaceuticals • Water / effluent • Education / research -
Features- Small size for mobile use
- Automatic temperature compensation
- High resolution of the scale areas
- Robust and compact design
- Easy calibration and adjustment
-
Features- Small size for mobile use
- Automatic temperature compensation
- High resolution of the scale areas
- Robust and compact design
- Easy calibration and adjustment
-
Features- Small size for mobile use
- Automatic temperature compensation
- High resolution of the scale areas
- Robust and compact design
- Easy calibration and adjustment
-
Features- Small size for mobile use
- Automatic temperature compensation
- High resolution of the scale areas
- Robust and compact design
- Easy calibration and adjustment
-
Features- Small size for mobile use
- Automatic temperature compensation
- High resolution of the scale areas
- Robust and compact design
- Easy calibration and adjustment
-
Features- Small size for mobile use
- Automatic temperature compensation
- High resolution of the scale areas
- Robust and compact design
- Easy calibration and adjustment
-
Features- Small size for mobile use
- Automatic temperature compensation
- High resolution of the scale areas
- Robust and compact design
- Easy calibration and adjustment
-
Features- Small size for mobile use
- Automatic temperature compensation
- High resolution of the scale areas
- Robust and compact design
- Easy calibration and adjustment
-
Application • Beverages • Food • Sugar / sweeteners • Chemicals • Flavours • Petrochemicals • Cosmetics / hygiene • Metalworking • Pharmaceuticals • Water / effluent • Education / research -
Features- Ideal for room, indoor and outside
- Large Dial for Easy Reading
- No Power Needed
- Temp. and Humidity display simultaneously
- Made with Stainless Frame
-
Features- Digital sensor applied for MEMS technology
- Embedded RS485 communication port based on MODBUS RTU/ASCII
- Excellent long term stability and self-digital correction
- Quick counter reaction speed (within 4 second)
- Slim size - 310(L) x 280(H) x 45(D) mm
-
Features:- Measure moisture content by simply piercing with electrodes
- Handheld device with large built-in display
- Automatic temperature compensation
- Bias adjustment
- Auto power off
- Alarm setting
-
Features- Generates stable humidity and temperature conditions (<+-0.1% RH, <+-0.01 Degree Celsius)
- Calibration solution for the laboratory and on-site
- Humidity equilibrium typically in only 5 minutes for HG2-S, 15 minutes for HG2-XL
- Calibrate multiple probes simultaneously
- << Auto >> Automated calibration optional
- << Remote API >>logging and control with third party software (optional)
- Integrated FDA 21 CFR part 11 compliant Rotronic HW4 software
-
Features- Numerical and graphical color display for up to 3 parameters
- IP65 metal housing
- Support for one Indigo compatible probe
- Tool-free locking wheel for the probe
- 24 V AC/DC power supply input
- 3 pre-configured analog outputs (mA or V)
- Service port on the front for connecting to Vaisala Insight PC software or Indigo80 handheld indicator
-
Features- Display for easy data evaluation and visualization
- Versatile connectivity, power and wiring options
-
Features- Information display instrument
- 24-hour continuous operating mode
- Data transfer to the PC
- Audible and light threshold alarms
-
Features- Information display instrument
- 24-hour continuous operating mode
- Data transfer to the PC
- Audible and light threshold alarms
-
Features- New & improved petroleum resistant scale, makes it easier to read.
- Choose 10 liter capacity fuel test measure cans.
- Provides a calibrated measure for testing the accuracy of fuel dispensing equipment.
- Stainless steel construction.
- Suitable for use with diesel proving can, biodiesel, petrol & AdBlue
- 304 stainless steel construction.
- Filling the measure to the “zero” mark will ensure an accurate amount of liters has been dispensed allowing the dispenser to be calibrated accordingly
- Full range of spares available on request
-
Features- Online service for monitoring of measurement parameters such as humidity and temperature
- Secure cloud storage of data
- Management of measurement locations using an intuitive system of sites and locations
- Connect using a web browser on your mobile phone, tablet or computer
- Add devices and users based on your needs
- No device pairing needed, as devices are associated with a specific cloud account when they are purchased
-
Features- Standard hose drain, hard/ soft pipe connection available
- Automatic Power memory and restart function function
- Supply Fan - Class F
- Unique Structure
- Pump Drain
-
Features- Dehumidity
- Water Supply
- Immerse Water Pump
- Self Detection
- Customized available
-
Features- LED digital display and operation panel
- Washable coarse air filter, easy to maintain
- PGMCC (R410a) brand compressor
- Both bucket and continuous hose drain
- Low temperature auto-defrost
- 1-24 hours timer on and timer off
- Automatic water full alarm and stop
- Universal castors, eave to move around
-
Product Features- LED Digital display, timer on and off, auto-restart function
- 304 stainless steel mist maker, durable and efficient
- Low noise water proof fan, shield protected
- Superior transformer, ensure long time
- Water lack protection, manual/ auto water supply
- Compact design. easy to install and maintain
- Bottom castors, easy to move about
-
Features- Low running and maintenance costs
- High evaporation efficiency, low pressure drop
- Now water treatment required, no water carry-over
- Compact design, no risk or over-saturation
- Self-clean function, low scaling safe and hygiene
- LGE digital display timer on and off, auto-restart function
- Water-lack protection, manual/ auto water supply
-
Features- Ceramic Sensor, Ø17mm
- Different cable material
- Customer specific versions e.g. special pressure ranges
- Nominal pressure range from 0 ... 6 mH2O up to 0 ... 200 mH2O
- Energy Industry
- Environmental Industry
-
Features- Ceramic Sensor, Stainless Steel Probe, Ø27mm,
- Nominal pressure range from 0 ... 4 mH2O up to 0 ... 250 mH2O
- Accuracy according to IEC 60770: 0.5 % FSO
-
Features- Nominal pressure: from 0 ... 4 mH2O up to 0 ... 250 mH2O
- Nominal temperature from 0 ... 30 °C up to 0 ... 70 °C
- Accuracy: 0,5 % FSO
- Diameter 26,5 mm
- Separate output signals for pressure and temperature ranges
- Excellent accuracy
- Easy handling
- Low maintenance and wiring costs
- Different kinds of cables
- Different kinds of seal materials
- Customer specific versions
- Energy Industry
- Environmental Industry
-
Features- Nominal pressure: 0 ... 400 mbar up to 0 ... 60 bar
- Accuracy: 0.5 % FSO
- Pressure port G 3/4" flush
- Ceramic Sensor, Plant And Mechanical Engineering
- IS-version (only for 4... 20 mA / 2-wire): Ex ia = intrinsically safe for gases and dusts
- SIL 2 application according to IEC 61508 / IEC 61511
- Pressure port PVDF for aggressive media
- Different electrical and mechanical connections
- Customer specific versions
- Mechanical and Plant Engineering
- Energy Industry
- Medical Technology
- Environmental Industry
-
Features- Nominal pressure: 0 ... 40 mbar up to 0 ... 20 bar
- Accuracy: 0.35 % (opt. 0.25 %) FSO
- Pressure port G 1 1/2" for pasty and polluted media
- Ceramic Sensor
- IS-version (Ex ia = intrinsically for gases and dusts)
- Pressure port PVDF for aggressive media
- Diaphragm pure ceramic (99,9 % Al2O3)
- Customer specific versions
- Mechanical and plant engineering
- Laboratory
- Environmental Industry
-
Features- Nominal pressure: 0 ... 40 cmH2O up to 0 ... 100 mH2O
- Accuracy: 0.35 % (opt. 0.25 %) FSO
- Diameter 39.5 mm
- Cable and sensor section detachable
- Ceramic Sensor
- Especially for sewage, viscous and pasty media
- IS-protection (Ex ia = intrinsically safe for gas and dust)
- Cable protection via corrugated pipe
- Diaphragm pure ceramic (99,9 % AI2O3)
- Different kinds of cable
- Different kinds of elastomeres
- Chemical Industry
- Energy Industry
- Environmental Industry
-
Features- Nominal pressure range 0 ... 60 cmH2O up to 0 ... 100 mH2O
- Accuracy: 0.1 %
- Diameter 39,5 mm
- Cable and sensor section detachable
- HART®-communication (setting of offset. span and damping)
- Permissible temperatures up to 85 °C
- High long term stability
- IS-version (Ex ia = intrinsically safe for gas and dust)
- Cable protection via corrugated pipe
- Diaphragm (AI2O3 99,9 %)
- Accessories e.g. mounting flange with cable gland and terminal clamp
- Chemical Industry
- Energy Industry
- Environmental Industry
-
Features- Nominal pressure: 0 ... 40 cmH2O up to 0 ... 100 mH2O
- Accuracy: 0,25 % / 0.35 % FSO
- Diameter 39.5 mm
- Especially for sewage, viscous and pasty media
- Chemical Industry
- Energy Industry
- Environmental Industry
-
Features- Nominal pressure range 0 ... 60 cmH2O up to 0 ... 100 mH2O
- Accuracy: 0.1 %
- Diameter 39.5 mm
- HART®-communication (setting of offset. span and damping)
- Permissible temperatures up to 85 °C
- High long term stability
- IS-version (Ex ia = intrinsically safe for gas and dust)
- Mounting with stainless steel pipe
- Flange version
- Diaphragm 99.9 % AI2O3
- Accessories e.g. transmitter and mounting flanges and terminal clamp
- Water Industry
- Sewage Industry
- fuel and Oil Industry
-
Features- Nominal pressure: from 0 ... 4 mH2O up to 0 ... 100 mH2O
- Acuracy: 0,35 % FSO
- Diameter 22 mm
- Excellent long term stability
- Highly appropriated for wastewater, sludge and viscous media
- Diaphragm ceramics 99,9% Al2O3 (on request)
- IS-version (in preparation), Ex ia = intrinsically safe for gases and dust
- Mounting with stainless steel tube
- Different kinds of cable
- Different kinds of elastomer
- Chemical Industry
- Energy Industry
- Environmental Industry
-
Features- Nominal pressure: from 0 ... 40 cmH2O up to 0 ... 200 mH2O
- Diameter 39.5 mm
- LR-certificate (Lloyd´s Register)
- DNV ▪ GL Approval (Det Norske Veritas ▪ Germanischer Lloyd)
- ABS-certificate (American Bureau of Shipping)
- CCS-certificate (China Classification Society)
- High overpressure resistanc
- High long-term stability
- Diaphragm Al2O3 99.9 %
- Different housing materials (stainless steel, CuNiFe)
- IS-version, Ex ia = intrinsically safe for gas
- Screw-in and flange version
- Accessories e.g. assembling and probe flange, mounting clamp
- Water Industry
- Shipbuilding/ Offshore Industry
-
Features- Nominal pressure: 0 ... 60 cmH2O up to 0 ... 200 mH2O
- Accuracy: 0.1 % FSO
- Shipping approvals: American Bureau of Shipping (ABS), Bureau Veritas (BV), China Classification Society (CCS), Det Norske Veritas (DNV), Germanischer Lloyd (GL), Lloyd's Register (LR)
- Diameter 39.5 mm
- HART®-communication (setting of offset,span and damping)
- High overpressure capability
- High long term stability
- IS-version; Ex ia = intrinsically safe for gases and dusts
- Diaphragm 99,9 % AI2O3
- Different housing materials (stainless steel, CuNiFe)
- Screw-in and flange version
- Accessories e.g. assembling and probe flange, mounting clamp
- Marine Industry
- Shipbuilding/ Offshore Industry
-
- Ceramic Sensor, Probe
- Nominal pressure range from 0 ... 1 mH2O up to 0 ... 100 mH2O
- Accuracy according to IEC 60770: 0.25 % FSO
-
Features- Ceramic Sensor, Flush, Plastic Probe
- Nominal pressure: from 0 ... 6 mH2O up to 0 ... 200 mH2O
- Diameter 21 mm
- Excellent linearity
- Excellent long term stability
- Accuracy: 0,5% FSO
- Suitable for hydrostatic level measurement e.g. 3/4" pipes
- Different cable materials
- Customer specific versions, e.g. special pressure rang
- Chemical Industry
- Environmental Industry
-
Features- Nominal pressure: 0 ... 4 mH2O up to 0 ... 100 mH2O
- Accuracy: 0.5 % FSO
- Diameter 35 mm
- Excellent long term stability
- Easy handling
- SIL 2 (safety integrity level) according to IEC 61508 / IEC 61511
- Different kinds of cables and elastomeres
- Customer specific version e.g. special pressure ranges
- Chemical Industry
- Environmental Industry
-
Features- Ceramic Sensor
- Nominal pressure: 0 ... 1 mH2O up to 0 ... 100 mH2O
- Accuracy: 0.35 % (opt. 0.25 %) FSO
- Diameter 35mm
- Diaphragm ceramics Al2O3 (99.9 %)
- Cable and sensor section detachable
- Excellent long term stability
- Integrated lightning protection 8 kA gas discharge tube (8/20µsec); 4 kV surge l-l/l-e according to EN61000-4-5
- Mounting accessories
- Different kinds of elastomer
- Customer specific versions e. g. special pressure ranges
- Chemical Industry
- Environmental Industry
-
Features- High Purity Ceramic Sensor
- Nominal pressure: 0 ... 40 cmH2O up to 0 ... 100 mH2O
- Accuracy: 0.35 % (opt. 0.25 %) FSO
- Diameter 45 mm
- Chemical resistance
- High over pressure capability
- Pure ceramic sensor
- Especially for tank level measurement of viscous and aggressive media
- Housing material PP-HT or PVDF
- Diaphragm ceramics Al2O3 (99.9 %)
- Different kinds of cable and seal materials
- Prepared for mounting with pipe
- Chemical Industry
- Environmental Industry
-
Features- Ceramic Sensor
- Nominal pressure: 0 ... 40 cmH2O up to 0 ... 100 mH2O
- Accuracy: 0.35 % (opt. 0.25 %) FSO
- Diameter 45 mm
- Cable and sensor section detachable
- Chemical resistance
- Housing PP-HT
- Integrated lightning protection and increased overvoltage protection; 8 kA gas discharge tube (8/20 μsec); 4 kV surge l-l/l-e according to EN61000-4-5
- Cable protection (on request)
- Diaphragm pure ceramic (99,9 % AI2O3)
- Different kinds of cables
- Different kinds of elastomeres
- Chemical Industry
- Environmental Industry
-
Features- Stainless Steel Sensor
- Nominal pressure: 0 ... 1 mH2O up to 0 ... 250 mH2O
- Accuracy: 0.35 % (opt. 0.25 %) FSO
- Diameter 19 mm for cramped areas e.g. 1" observation well
- Small thermal effect
- Excellent linearity
- Excellent long term stability
- Different kinds of cable
- Customer specific versions e.g. special pressure ranges
- Energy Industry
- Environmental Industry
-
Features- Stainless Steel Sensor, Stainless Steel Probe
- Nominal pressure: 0 ... 1 mH2O up to 0 ... 250 mH2
- Accuracy: 0.35 % (opt. 0.25% / 0.1 %) FSO
- Diameter 26.5 mm
- Small thermal effect
- Excellent long term stability
- High Accuracy
-
Features- Nominal pressure: 0 ... 4 mH2O up to 0 ... 200 mH2O
- Accuracy: 0,1 % FSO
- Diameter 26,5 mm
- Small thermal effect
- Excellent accuracy
- Excellent long term stability
- IS-version (Ex ia = intrinsically safe for gas and dust)
- Drinking water certificate according to DVGW and KTW
- Different kinds of cables
- Different kinds of seal materials
- Energy Industry
- Oil and Gas Industry
- Environmental Industry
-
Features- Nominal pressure: 0 ... 1 mH2O up to 0 ... 250 mH2O
- Nominal temperature from 0 ... 30 °C up to 0 ... 70 °C
- Accuracy: 0.35 % (opt. 0.25 %) FSO
- Diameter 26.5 mm
- Separate output signals for pressure and temperature ranges
- Easy handling
- low maintenance and wiring costs
- Drinking water certificate acc. to DVGW and KTW
- Different kinds of cables
- Different kinds of elastomers
- Customer specific versions
- Energy Industry
- Environmental Industry
-
Features- Stainless Steel Sensor
- Nominal pressure range from 0 ... 1 mH2O up to 0 ... 250 mH2O
- Accuracy: 0.35 % (opt. 0.25% / 0.1 %) FSO
- Diameter 35 mm
- Cable and sensor section detachable
- Excellent long term stability
- High accuracy
- IS-version (Ex ia = intrinsically safe for gas and dust)
- SIL 2 (Safety integrity level)
- Customer specific versions
- Mounting accessories as cable gland and terminal clamp of stainless steel
- Different kinds of cables
- Different kinds of seal materials
- Energy Industry
- Environmental Industry
-
Features- Stainless Steel Sensor
- Nominal pressure range from 0 ... 4 mH2O up to 0 ... 200 mH2O
- Accuracy: 0.1 % FSO
- Diameter 35 mm
- Cable and sensor section detachable
- Thermal error in compensated range -20...70°C: 0.2 FSO TC 0.02% FSO/10K 0,02 % FSO / 10K
- High accuracy
- Communication connection
- Turn-down 1:10
- IS-version (Ex ia = intrinsically safe for gas and dust)
- Mounting accessories as cable gland and terminal clamp in stainless steel
- Different kinds of cables
- Different kinds of seal materials
- Energy Industry
- Environmental Industry
-
Features- Stainless Steel Sensor
- Nominal pressure: 0 ...4 mH2O up to 0...200 mH2O
- Accuracy: 0.1 % FSO
- Diameter 35 mm
- Cable and sensor section detachable
- Thermal error in compensated range -20...70°C: 0.2 FSO TC 0.02% FSO/10K 0,02 % FSO / 10K
- High Accuracy
- Communication connection
- turn-down 1:10
- IS-version (Ex ia = intrinsically safe for gases and dusts)
- SIL 2 application according to IEC 61508 / IEC 61511
- Different electrical connections
- Customer specific versions e.g. special pressure range
- Mechanical and Plant Engineering
- Energy Industry
- Environmental Industry
-
Features- Stainless Steel Sensor
- Nominal pressure: 0 ... 400 mbar up to 0 ... 40 bar
- Accuracy: 0.1 % FSO
- Thermal error in compensated range -20 … 80 °C: 0.2 % FSO TC 0.02 % FSO / 10 K
- Turn-down 1:10
- Communication interface for adjusting of offset, span and damping
- IS-version (Ex ia = intrinsically safe for gases and dusts)
- Adjustment of nominal pressure gauges (factory-provided)
- Chemical Industry
- Environmental Industry
-
Features- Stainless Steel Sensor
- Nominal pressure: 0 ... 1 mH2O up to 0 ... 100 mH2O
- Accuracy: 0.35 % (opt. 0.25 %) FSO
- Diameter 35 mm
- Cable and sensor section detachable
- Excellent linearity
- Small thermal effect
- Integrated lightning protection and increased over voltage protection; 8 kA gas discharge tube (8/20 μsec); 4 kV surge l-l/l-e according to EN61000-4-5
- SIL 2 (safety integrity level) according to IEC 61508 / 61511
- different kinds of cable and elastomeres
- customer specific versions e.g. special pressure ranges
- Energy Industry
- Environmental Industry
-
Features- Large display for actual measurement
- Max./ Min./ AVG indication
- External temperature probe input
- Battery status indication
- Easy to use Window software
- Visual and acoustic Hi-Lo Alarm
- Adjustable logging interval from 1 second to 24hours
- Easy to change battery
-
Features- Large display for actual measurement
- Max./ Min./ AVG indication
- External temperature probe input
- Battery status indication
- Easy to use Window software
- Visual and acoustic Hi-Lo Alarm
- Adjustable logging interval from 1 second to 24hours
- Easy to change battery
-
Features:- Digital LCD display with backlight
- 5.5% to 99.9% Range, 0~1 V
- Stored up to 99 readings
- 8 wood groups build in
- Max./Min./Average values recalled
- Built-in calibration
- Changeable of extension probe
- CE and RoHS Approved
-
Features:- Multi-color LED Bar-Graph readout
- 5.5% to 100% Moisture Range
- 0~1 Vdc Signal Output
- Audible alert when value is detected
- Built-in calibration function
- Sturdy and durable moisture probe
- CE and RoHS Approved
-
Features:- Built-in multifunction
- Suitable different type of probes
- 8 type of wood calibrations scales
- Data-Hold, Max./Min.
- Built-in calibration
- Easy to operate, long-term stability
-
Features:- High accurate, fat response
- Auto temperature compensation
- Data-Hold / Max. / Min.
- Auto power off
- Built-in calibration (CAL) function
- Drop/dust-proof, long term stability
-
Features:- Moisture measurement and control
- 4~20 mA or 0~2 Vdc output
- IP65 watertight enclosure, stainless steel probe
- Custom calibration for measuring object
- Wide supply voltage: 12 ~ 40 Vdc
- Easy mounting and quick wiring
-
Features:- Moisture measurement and control
- 4~20 mA or 0~2 Vdc output
- IP65 watertight enclosure, stainless steel probe
- Custom calibration for measuring object
- Wide supply voltage: 12 ~ 40 Vdc
- Easy mounting and quick wiring
-
Features- IP66/IP68 water & dust resistant and 1.5 meters drop resistant case, rugged and durable designs
- Compact, lightweight, small size with back clip, ergonomic and wearable design
- Standard man down alarm, password protection, ID identification function
- Real time value, TWA, STEL, MAX, MIN multiple numerical display
- With self-test function, which can improve safety by automatic self-test
- Standard 1000 data records and 100 events records
- Support firmware upgrade remotely
- With docking station to perform daily bump test and calibration (Optional)
- Wireless data transmission including Lora, Bluetooth (Optional)
- Low power consumption, battery run time is up to 24 hours per charge