- T-Bar Design
- 1-Second Measuring Interval
- Max. - Min. Function
- Auto Off-Function
- Water-Tight
- Protective cover and pocket clips included
-
Features -
Features- Reduced tip for faster response
- Waterproof to IP66
- Large Display
- Pocket-sized
-
Features- Reduced tip for faster response
- Waterproof to IP66
- Large Display
- Pocket-sized
-
Features- Dew point range -20℃ to +85℃
- Accuracy to ±0.20 ℃ dew point
- Dynamic balance control for contamination
- Simultaneously measures dew point, temperature, relative humidity, absolute humidity, specific humidity, enthalpy, vapor pressure and volume ratio (ppmV).
- Real time data logging and curve display
- MAX value and MIN value are recorded
- AC or alternative DC power supply
- MODBUS RTU and USB communication
- 4 inch touch screen
-
Features- Dew point measure range -40℃to +90℃
- Accuracy to ±0.15 ℃ dew point
- Dynamic balance control for contamination
- Simultaneously measures dew point, temperature, relative humidity, absolute humidity, specific humidity, enthalpy, vapor pressure and volume ratio (ppmV).
- Real time data logging and display curve
- MAX value and MIN value are recorded
- AC or alternative DC power supply
- MODBUS RTU and USB communication
- 4 Inch touch screen
- External temperature sensor port
- Improved frost assurance at low dew points
-
Features:- Measure moisture content by simply piercing with electrodes
- Handheld device with large built-in display
- Automatic temperature compensation
- Bias adjustment
- Auto power off
- Alarm setting
-
Feature- Real time monitor: CO2/TVOC/PM2.5/PM1.0/Temp/Humidity
- Smart App Data logger/export
- 7" Big LCD Display
- Adjustable screen light
- IoT controller/RS485/Relays
- Alarm Notifications
- Auto or Manual Calibration
- Accurate NDIR sensor
-
Feature- Repid Measurement
- Auto-Calibration
- Alarm Memory
- Smoke Alarm
- CO2 Alarm
- WiFi
-
Feature- Increased sensitivity to visualize temperature differences
- Easier to visualize and diagnose issues with sharper onscreen images, multiple rectangle markers and 9 color palettes
- More intuitive visual interface, improved, user-tested, touch screen interface
- More flexibility to visualize target, tiny-to-large with interchangeable smart lenses - no calibration required, 2x and 4x telephoto, wide angle and macro lens compatibility
- Capture a clear, accurate image focused throughout the field of view with MultiSharp™ Focus
- Get an instant in-focus image of your designated target. LaserSharp® Auto Focus uses a built-in laser distance meter that calculates and displays the distance from your designated target.
- Get 4x the pixel data with SuperResolution, which captures multiple images and combines them to create a 1280 x 960 image
- Save time - wirelessly sync images directly from your camera to the Fluke Connect® system, and attach to an asset record or work order
- Reduce the need take notes in the field with IR-PhotoNotes™ and voice annotations
- Subject to Export Control
-
Feature- Manual focus infrared camera with professional grade 320x240 resolution (76,800 pixels)
- Captures optimal images from as close as 0.15m (6in)
- Provides a D:S of 514:1
- Offers temperature measurement range from -20 °C to 550 °C (–4 °F to 1022 °F)
- Includes built-in laser pointer
- Displays images on a 3.5 inch, 320x240 LCD
- Offers five presets of IR-Fusion® with AutoBlend and PIP to help find problems fast
- Captures visible light images with built-in 5 megapixel industrial performance digital camera
- Includes a smart battery system that allows you to easily monitor your battery charge level with five-segment LED display
- Allows real-time communication by email from your smart phone with Fluke Connect®*
- Stores thousands of images—4 GB internal memory and included 4 GB micro SD card
-
Feature- IR Fusion® technology with AutoBlend™ mode blends visual and infrared images so you can see the details crucial to identifying potential problems
- IR-PhotoNotes™ makes it quick and simple to document critical information by allowing you to add up to 3 digital images to your thermal image
- Use voice annotation to document what you're looking at, even in dark spaces, or to capture non-visible surrounding details
- Save time by using color alarms to set temperature thresholds; conduct a quick scan and easily diagnose irregularities
- Fluke Connect® enabled so you can capture and share reliable data you can trust and trace
-
Features- Easily and quickly identify problems before they become expensive failures
- See the details with improved resolution that delivers the right image quality you need to make the proper diagnosis with 2.5 times more pixels
- See more clearly than before and analyze faster with picture-in-picture and blending at different preset levels to capture incredibly detailed images that help identify potential issues
- Clearly see what you are inspecting with 3.5 inch 320 x 240 LCD - 33% more viewing area compared to 3.0 inch LCD screen
- Simple, easy to use point and shoot technology automatically focuses from 0.45m (1.5ft) and beyond
- Fluke Connect with ShareLive video call is the only wireless measurement system that lets you stay in contact with your entire team without leaving the field. The Fluke Connect mobile app is available for Android (4.3 and up) and iOS (4s and later)
-
Features- Quick scans of electrical equipment, machinery and other assets
- Enterprise Wi-Fi
- Fully radiometric thermal imager gives you measurement data to the pixel with 120 x 90 infrared resolution (10,800 pixels)
- -4 to 302°F (-20 to 150°C) temperature measurement range
- Manual level and span
-
Features- 0.02%, 0.05% FS Accuracy
- Intrinsically Safe
- Field Switchable Pressure Module
- Dual Digital Pressure Module Inputs
- Color Touchscreen Display
- Built-in Quick Test Task Feature
- Built-in Barometer
- Intuitive Smartphone Like Interface
- Bluetooth and USB Communication
- Optional HART Communication
- Communicates with Additel's Link Mobile App
-
Feature- Features real-time gas concentration readings and alarm status
- Large graphic display’s icon-driven interface rotates 180°, for added convenience
- User-friendly design allows easy access to pump, sensors, filter, and battery compartment
- Wireless unit provides 5-way remote notification of alarm conditions
- Equipped with “man down” alarm with pre-alarm and real-time remote wireless notification
- Measures 5.5" x 3.2" x 1.5" and weighs 12.9 oz.
- Li-ion battery provides a 10 hour battery life
- Features visual, audible, and vibrating alarms
- Gas ranges LEL 0-100%, O2 0-30%, CO 0-500 ppm, and H2S 0-100 ppm
- Intrinsic safety Class 1, Div 1, Groups A, B, C, D; IECEx/ATEX (II 1 GEx ia IIC T4)
- EchoView Host wireless mini-controller item# 102334, sold separately
- Minimum of 1 Echo View is required for wireless communication
-
Feature- Features real-time gas concentration readings and alarm status
- Large graphic display’s icon-driven interface rotates 180°, for added convenience
- User-friendly design allows easy access to pump, sensors, filter, and battery compartment
- Wireless unit provides 5-way remote notification of alarm conditions
- Equipped with “man down” alarm with pre-alarm and real-time remote wireless notification
- Measures 5.5" x 3.2" x 1.5" and weighs 12.9 oz.
- Li-ion battery provides a 10 hour battery life
- Features visual, audible, and vibrating alarms
- Gas ranges LEL 0-100%, O2 0-30%, CO 0-500 ppm, and H2S 0-100 ppm
- Intrinsic safety Class 1, Div 1, Groups A, B, C, D; IECEx/ATEX (II 1 GEx ia IIC T4)
- EchoView Host wireless mini-controller item# 102334, sold separately
- Minimum of 1 Echo View is required for wireless communication
-
Features- PI/DAR timed ratio tests
- Live circuit detection prevents insulation test if voltage >30 V is detected for added user protection
- VFD low-pass filter for accurate motor drive measurements
- Auto-discharge of capacities voltage for added user protection
- Insulation test of 0.01 MΩ to 2 GΩ
- Insulation test voltages of 50, 100, 250, 500 V for many applications
- AC/DC voltage, DC millivolts, AC/DC milliamps, resistance (Ω), continuity
- Capacitance, diode test, temperature, Min/Max, frequency (Hz)
- Auto power off to save battery power
- CAT III 1000 V, CAT IV 600 V measurement category
- Large display with backlight
- Safety first. Keep yourself out of harm's way by monitoring your test measurements remotely
- Prove your job is done right by quickly seeing and sharing measurement results wirelessly with your smartphone
- Quickly find problems by saving and comparing measurements over time on a wireless device
-
Features- Auto discharge of capacitive voltage
- AC/DC voltage
- DC millivolts
- AC/DC milliamps
- Continuity
- Auto power off to save battery power
- True RMS
- Large display with backlight
- Live circuit detection prevents insulation test if voltage <30 V is detected for added user protection
- CAT III 1000V, CAT IV 600V measurement category
-
Features- Rugged, compact advanced insulation resistance tester for electrical contractors and industrial and commercial electricians
- Automatically calculates Polarization Index and Dielectric Absorption Ratio
- Makes repetitive tests simple and easy with a Compare (Pass/Fail) function
- Offers multiple insulation test voltages: 50 V, 100 V, 250 V, 500 V, and 1000 V
-
Feature- Numerous connectivity solutions. Compact and lightweight.
- Strong, protective, concussion-proof design.
- Real-time gas concentration readings, location, alarm, and status enabled by state-ofthe-art wireless technology.
- IP67 water and dust resistant case
- Five-way local and remote notification of alarm conditions. Short bump test and calibration time. Global approval for worldwide acceptance
- Filtered LEL sensor options to inhibit sensor poisoning. Compatible with Safety Communicator. Device Management with Honeywell Safety Suite
-
Feature- Monitors Indoor Air Quality (IAQ)
- Measures: Particulate Matter, Temperature, Humidity, VOC’s and Pressure
- Automatically uploads data to the EasyLog Cloud
- Coloured status ring shows IAQ level
- Sounder and instant notifications when IAQ is poor
- Detects VOCs from paints, lacquers, paint strippers, cleaning products, furnishings, glues, adhesives and alcohol
- Control device and view data anywhere with the EasyLog Cloud or App
- Power supply included
- Internal back-up battery if power interrupted
-
Feature- 4-in-1 Monitor PM2.5, CO2, temperature & humidity via RS-485 at the same time.
- High Brightness LED Easily recognize measuring types and values.
- 6-segment CO2 Emoticon As the local situation and refer to CO2 indication standards to transfer the suitable emoticon
- 6-segment PMV Indication Refer to PMV indication to display the real-time body sensing.
- Bargain Set eYc Multifunction PM2.5 Indoor Air Quality Monitor ( type : eYc TGP03 )
-
Feature- Dual Beam NDIR technology is used to measure CO2 concentration
- Audible Alarm
- Data Logging with SD Card
- RS485 Communication Interface
- Rechargeable Battery
-
Features- Measure and calibrate SPRTs, RTDs, thermistors and thermocouples
- 1 PPM resistance ratio accuracy (channel 1)
- 8 1/2-digit DC multimeter
- Measure up to 82 channels
- Bluetooth, WIFI, USB& Ethernet (RJ-45) capable
- Auto temperature control of Additel and other manufacture's heat sources
- Built-in automatic temperature control, data collection, and coefficient generation
- Support for creating custom control of heat sources with RS-232
- Auto - zero power feature (self heating compensation)
- 10.1 in. touch screen display
- Supports fully automated temperature calibrations with data collection and report generation (no software required)
-
Features- Can be used in private LoRa mode – only compatible with Enless transmitters
- 118 x 79 x 43mm
- IP/MSTP – DHCP/BBMD interfaces
- BACnet ASC profile
- Can manage up to 40 transmitters
- External power supply (7.5 to 24V)
-
Features
Software
- Accurate real-time data display (i.e. temperature, strength, max-min values, and graphs)
- Maturity calibration database
- Free Android/iOS app with easy-to-use guide
- Project management tools including live data sharing
- Giatec 360 web-based cloud dashboard
- Proactive AI notifications of concrete pouring time and mix calibration errors
- Full PDF & CSV reporting and data exporting
- Open API integration with project management applications (i.e. Procore)
Hardware
- Wire-free and wireless technology
- Fast, simple, and hassle-free activation and installation
- Extended temperature cable and probe for mass concrete
- Two points of temperature measurements located in sensor cable and body
- Rugged and waterproof design
- Long battery life
- 24/7 remote monitoring capabilities with the SmartHub™ device
-
Features- Our lowest cost WiFi temperature data logger
- Measurement range -20 to +60°C
- Uploads data to the EasyLog Cloud
- Status indicators and sounder
- Set up your own alarms and notifications
- Typical battery life over 1 year, or can be permanently powered
-
Features- Temperature measurement range of -200 to +1300°C (-328 to +2372°F). The K-type probe provided with the product measures between 0 to +200°C (+32 to +392°F) and other electrically isolated thermocouple probes can be used.
- Records and uploads temperature data to the EasyLog Cloud
- Access live temperature data via any Internet Browser or the EasyLog Cloud App
- Set up alarm options for temperature zone breaches – email alerts, beeper alarms or LED flash alerts
- Battery life of up to 2 years
-
Features- Measures temperature between -40 to +125 °C/-40 to +257 °F using two 75mm length barrel temperature probes on 3m cables
- Records and uploads temperature data to the EasyLog Cloud
- Access live temperature data via any Internet Browser or the EasyLog Cloud App
- Set up alarm options for temperature zone breaches – email alerts, beeper alarms or LED flash alerts
- Suitable for indoor and outdoor use
- Battery life of up to 2 years
-
Features- Measures temperature between -40 to +125 °C/-40 to +257 °F using two 75mm length barrel temperature probes on 3m cables
- Records and uploads temperature data to the EasyLog Cloud
- Access live temperature data via any Internet Browser or the EasyLog Cloud App
- Set up alarm options for temperature zone breaches – email alerts, beeper alarms or LED flash alert
- Suitable for indoor and outdoor use
- Battery life of up to 2 years
-
Features- Measures ambient temperature between -20 to +60 °C/-4 to +140 °F when running on mains power (-18 to +55 °C/-0.4 to +131 °F when running on battery power)
- Records and uploads temperature data to the EasyLog Cloud
- Access live temperature data via any Internet Browser or the EasyLog Cloud App
- Set up alarm options for temperature zone breaches – email alerts, beeper alarms or LED flash alerts
- Suitable for indoor and outdoor use
- Battery life of up to 2 years
-
Features- Measurement range -100 to +100°C (-148 to +212°F)
- High accuracy T-type probe on 2m cable
- Records and uploads temperature data to the EasyLog Cloud
- Access live temperature data via any Internet Browser or the EasyLog Cloud App
- Set up alarm options for temperature zone breaches – email alerts, beeper alarms or LED flash alerts
- Battery life of up to 2 years
-
Features- Measures temperature between -40 to +125 °C/-40 to +257 °F using a 75mm length barrel temperature probe on a 3m cable
- Records and uploads temperature data to the EasyLog Cloud
- Access live temperature data via any Internet Browser or the EasyLog Cloud App
- Set up alarm options for temperature zone breaches – email alerts, beeper alarms or LED flash alerts
- Suitable for indoor and outdoor use
- Battery life of up to 2 years
-
Features- Measures temperature between -40 to +125 °C/-40 to +257 °F using a 75mm length barrel temperature probe on a 3m cable
- Records and uploads temperature data to the EasyLog Cloud
- Access live temperature data via any Internet Browser or the EasyLog Cloud App
- Set up alarm options for temperature zone breaches – email alerts, beeper alarms or LED flash alerts
- Suitable for indoor and outdoor use
- Battery life of up to 2 years
-
Features- Can be installed as part of a 21CFR compliant system with additional controls including permission-based use, authority level sign-off and full system audit
- Dual channel recording through two external K-Type Thermocouple Probes (supplied) 0 to +200°C (+32°F to +392°F), for details see TC probes datasheet
- Thermocouple probe temperature measurement range -270 to +1372°C (-454 to +2501°F) (allows interchangeable probes)
- Easy sensor set-up using free 21CFR WiFi Sensor Software
- Wirelessly stream and view data on the 21CFR Cloud
- Configurable high and low alarms with indicator
-
Features- Can be installed as part of a 21CFR compliant system with additional controls including permission-based use, authority level sign-off and full system audit
- -40°C to +125°C (-40°F to +257°F) temperature measurement range
- Dual channel recording through two high accuracy thermistor probes Wirelessly stream and view data on the 21CFR Cloud
- Easy sensor set-up using free 21CFR WiFi Sensor Software
- Configurable high and low alarms with indicator