- °F/°C selectable
- Min/Max memory stores lowest/highest readings
- Automatic calibration feature
- IP65 Waterproof
- Reduced Tip Probe
- Complies with FDA Food Code 4-203.11
-
- Lightweight, compact, 2-in-1 design
- Thermocouple probe for internal product temperature
- Infrared for instant non-contact surface measurement
- Multi-beam laser for accurate targeting
- Ideal for extremely hot areas, moving objects, hard to reach places
- Green backlight indicates HACCP food safety zone
- Red backlight indicates HACCP danger zone
- Min/Max memory in IR mode
- NSF Certified, NIST traceable
- Fast 3 second thermocouple reading
- Instant infrared reading
- Low battery indicator
-
Main Function
- Heating / cooling output
- Independent timer output
- High / Low alarm output
- Defrost output
- Precise temperature control
- Sensor correction
- Sensor error detection
- Data back up
- Minimum on/off maintaining time setup
- RS485 communication (MODBUS)
- Transmission output
- Auto-output operation cycle settable in case of sensor error
-
Main Function
- Heating / cooling output
- Independent timer output
- High / Low alarm output
- Defrost output
- Precise temperature control
- Sensor correction
- Sensor error detection
- Data back up
- Minimum on/off maintaining time setup
- RS485 communication (MODBUS)
- Transmission output
- Auto-output operation cycle settable in case of sensor error
-
Main Function
- Embedded run/stop switch, motor on/off, load run, auto-stop, manual stop, operation delay, load delay, embedded timer
- Pressure / temperature high level
- Temperature low level (standby for starting)
- Interlock input signal (emergency switch, OCR reverse phase)
- Usable thermometer and manometer
- RS485 communication (MODBUS)
-
Main Function
- Embedded run/stop switch, motor on/off, load run, auto-stop, manual stop, operation delay, load delay, embedded timer
- Pressure / temperature high level
- Temperature low level (standby for starting)
- Interlock input signal (emergency switch, OCR reverse phase)
- Usable thermometer and manometer
- RS485 communication (MODBUS)
-
Features
- Compatible with K, J and T-type thermocouple with miniature thermocouple plug connection
- Stores over 32,000 readings
- Logging rates between 1 second and 12 hours
- Immediate and delayed logging start
- EasyLog software available as a free download
- Supplied with 1.5m K-type thermocouple probe with 0 to 200°C (32 to 392°F) measurement range
-
Features
- Compatible with K, J and T-tyoe thermocouple with miniature thermocouple plug connection
- Stores over 32,000 readings
- Logging rates between 1 second and 12 hours
- Immediate and delayed logging start
- EasyLog software available as a free download
- Supplied with 1.5m K-type thermocouple probe with 0 to 200°C (32 to 392°F) measurement range
-
Features
- 3 data loggers for monitoring Chilled Goods, Frozen Goods and Ripening Goods
- No set-up required. One button press-to-start logging
- Pre-configured with appropriate sample rates and alarm thresholds for each application
- Reusable with 12+ months battery life
- Various export options including PDF, Microsoft Excel and JPEG
-
Features
- 3 data loggers for monitoring Chilled Goods, Frozen Goods and Ripening Goods
- No set-up required. One button press-to-start logging
- Pre-configured with appropriate sample rates and alarm thresholds for each application
- Reusable with 12+ months battery life
- Various export options including PDF, Microsoft Excel and JPEG
-
Features
- 3 data loggers for monitoring Chilled Goods, Frozen Goods and Ripening Goods
- No set-up required. One button press-to-start logging
- Pre-configured with appropriate sample rates and alarm thresholds for each application
- Reusable with 12+ months battery life
- Various export options including PDF, Microsoft Excel and JPEG
-
Features
- -30 to 80°C (-22 to +176°F) measurement range
- Stores over 250,000 readings
- Logging rates between 10 seconds and 1 hour
- On screen menu and graphing to start, stop, review and restart the logger in the field
- Triggered logging mode to start recording data once a user defined level is met
- User-programmable audible alarm thresholds with highly visible confidence/alarm LEDs
-
Features
- Compatible with K, J and T-type with miniature thermocouple plug connection
- Stores over 250,000 readings
- EasyLog software available as a free download
- Logging rates between 2 seconds and 1 hour
- Supplied with 1.5m K-type thermocouple with 0 to 200°C (32 to 392°F)
- Immediate, delayed, push-button or temperature triggered start mode
-
Features
- Compatible with K, J and T-type with miniature thermocouple plug connection
- Stores over 250,000 readings
- EasyLog software available as a free download
- Logging rates between 2 seconds and 1 hour
- Supplied with 1.5m K-type thermocouple with 0 to 200°C (32 to 392°F)
- Immediate, delayed, push-button or temperature triggered start mode
-
Features
- Measures temperature range of -40°C to +125°C (-40°F to +257°F)Lascar
- Stores over 250,000 readings
- Logging rates between 2 seconds and 1 hour
- On screen menu and graphing to start, stop, review and restart the logger in the field
- Triggered logging mode to start recording data once a user defined level is met
- High contrast, greyscale, backlit, graphic LCD screen to denote status and alarm level
- User-programmable audible alarm thresholds with highly visible confidence/alarm LEDs
- EasyLog software available as a free download
-
Features
- measurement range -40 to +125°C (-40 to +257°F)
- Stores over 250,000 readings
- Logging rates between 2 seconds and 1 hour
- On screen menu and graphing to start, stop, review and restart the logger in the field
- Triggered logging mode to start recording data once a user defined level is met
- User-programmable audible alarm thresholds with highly visible confidence/alarm LEDs
-
- Thermistor probe temperature measurement range -40 to +125°C (-40 to +257°F)
- Wirelessly stream and view data via WIFI on PCor FilesThruThaAir Cloud
- Easy sensor set-up using free PC software application
- View and analyse multiple sensors, including graphing of historic data
- Configurable high and low alarms with indicator
- Sensor memory stores all data even if WIFI is temporarily disconnected
-
Features
- Thermistor probe temperature measurement range -40 to +125°C (-40 to +257°F)
- Wirelessly stream and view data via WIFI on PCor FilesThruThaAir Cloud
- Easy sensor set-up using free PC software application
- View and analyze multiple sensors, including graphing of historic data
- Configurable high and low alarms with indicator
- Sensor memory stores all data even if WIFI is temporarily disconnected
-
Features
- Temperature measurement range -20 to +60°C (-4 to +140°F)
- Wirelessly stream and view data via WIFI on PCor FilesThruThaAir Cloud
- Easy sensor set-up using free PC software application
- View and analyse multiple sensors, including graphing of historic data
- Configurable high and low alarms with indicator
- Sensor memory stores all data even if WIFI is temporarily disconnected
-
Features
- Measures temperature range of -200°C to +1350°C (-328°F to +2465°F) (probe dependent)
- Dual channel recording through two external thermocouple probes
- Wirelessly stream and view data via WIFI on PCor FilesThruThaAir Cloud
- Easy sensor set-up using free PC software application
- View and analyze multiple sensors, including graphing of historic data
- Configurable high and low alarms with indicator
-
Features
- Measures temperature range of -40°C to +125°C (-40°F to +257°F)
- Dual channel recording through two external thermistor probes
- Wirelessly stream and view data via WIFI on PCor FilesThruThaAir Cloud
- Easy sensor set-up using free PC software application
- View and analyze multiple sensors, including graphing of historic data
- Configurable high and low alarms with indicator
- Sensor memory stores all data even if WIFI is temporarily disconnected
-
Features
- Measure and Record Temperature -18°C to 55°C Using Internal Sensor with ±0.2°C
- Logs over 1 Million Temperature Readings onto non-Volatile Internal Memory
- LCD Display Shows Current Temperature Readings, Min and Max Readings, Battery Level and Alarm Status
- No Software to Download, Simply Configure Using Browser, Recorded Readings Stored to EasyLog Cloud for Viewing on Any Device or Browser
- Includes (2) AAA Alkaline Batteries, Mounting Bracket and USB Cable
-
Features • -18 to +55°C (-0.4 to +131°F) temperature measurement range • Stores over 1,000,000 readings (As per spec table) • No software to install - configure using your normal web browser • Use with a PC or Mac • Display shows current, maximum and minimum readings • Status and alarm indicators • On-board alarm sounder • Data can be uploaded to the EasyLog Cloud
-
Features
- 4 data loggers for monitoring Chilled Goods, Frozen Goods, Ripening Goods and Ambient Pharmaceutical
- Custom cumulative alarm versions of each logger available if required.
- No set-up required. One button press-to-start logging
- Pre-configured with appropriate sample rates, alarm thresholds and cumulative alarms for each application
- No software required. Result appear in an automatically generated PDF file
-
Features
- 4 data loggers for monitoring Chilled Goods, Frozen Goods, Ripening Goods and Ambient Pharmaceutical
- Custom cumulative alarm versions of each logger available if required.
- No set-up required. One button press-to-start logging
- Pre-configured with appropriate sample rates, alarm thresholds and cumulative alarms for each application
- No software required. Result appear in an automatically generated PDF file
-
Features
- 4 data loggers for monitoring Chilled Goods, Frozen Goods, Ripening Goods and Ambient Pharmaceutical
- Custom cumulative alarm versions of each logger available if required.
- No set-up required. One button press-to-start logging
- Pre-configured with appropriate sample rates, alarm thresholds and cumulative alarms for each application
- No software required. Result appear in an automatically generated PDF file
-
Features
- 4 data loggers for monitoring Chilled Goods, Frozen Goods, Ripening Goods and Ambient Pharmaceutical
- Custom cumulative alarm versions of each logger available if required.
- No set-up required. One button press-to-start logging
- Pre-configured with appropriate sample rates, alarm thresholds and cumulative alarms for each application
- No software required. Result appear in an automatically generated PDF file
-
Features
- T1-T2 function
- Temperature alarm function
- Data hold function
- Adjustable auto power off timer
- Fast response with high accuracy
- Measures K, J, E, T type of thermocouples
- Min/Max/Avg recording of all channels
- USB interface, PC software included
- HOLD Function
- Datalogging up to 32,000 points each channel
- Large backlit LCD shows all channels on display
-
Features
- New 2 part document for ease of use
- New improved pull tab designed to make it easier to START
- Dual scale °F/°C chart
- Bilingual operation instructions
- Various models ranging from 5-Day to 90-Day transit periods
- Available in three temperature ranges
- Patented design guarantees recording trace stops at end of trip
- Vented case for superior air circulation and faster temperature response
- Serial number on each unit for traceability
-
Features
- Compact, single-use temperature logger
- Shadow Log guarantees trip data
- No software required for download
- Built-in USB connector, no special reading device needed
- On-board software automatically creates PDF and CSV reports in °F and °C
- View reports on a PC or tablet
- Recorded data automatically scaled to graph
-
Features
- Zone Display - clearly indicates the food is out of safe zone (4 to 60°C)above/below
- 2 in 1 design - Infrared + Foldable Thermocouple Probe
- IP65 Protection
- Bright white LED as pointer
- Ultra thin design
- Max/Min and Lock modes
- Retractable probe
- Dual display
- Auto power off
- Adjustable emissivity