- 4 Digital Display
- 10uA Resolution
- Auto Power Off
- Autoranging
- Peak Hold Function
- Data HoldFunction
- Auto Zero
-
Features
- Dew point range -20℃ to +85℃
- Accuracy to ±0.20 ℃ dew point
- Dynamic balance control for contamination
- Simultaneously measures dew point, temperature, relative humidity, absolute humidity, specific humidity, enthalpy, vapor pressure and volume ratio (ppmV).
- Real time data logging and curve display
- MAX value and MIN value are recorded
- AC or alternative DC power supply
- MODBUS RTU and USB communication
- 4 inch touch screen
-
Features
- Dew point measure range -40℃to +90℃
- Accuracy to ±0.15 ℃ dew point
- Dynamic balance control for contamination
- Simultaneously measures dew point, temperature, relative humidity, absolute humidity, specific humidity, enthalpy, vapor pressure and volume ratio (ppmV).
- Real time data logging and display curve
- MAX value and MIN value are recorded
- AC or alternative DC power supply
- MODBUS RTU and USB communication
- 4 Inch touch screen
- External temperature sensor port
- Improved frost assurance at low dew points
-
Features
- One AP10 supports up to 32 VaiNet data loggers
- Runs on Power over Ethernet or DC Adaptor
- Minimal infrastructure and no signal amplifiers needed
- Uses HTTPS communication and encryption to ensure secure data transmission
- Chirp Spread Spectrum wireless modulation is resistant to Multipath fading
- Secure firewall and data integrity
-
Features
- Wrist warning device.
- Non-stop performance monitoring of the warning device.
- LED and vibrating alarm of threshold levels exceeding with the option to turn off the vibrating alarm.
- Non-stop performance monitoring of the built-in Geiger-Muller counter.
- Manual control of the built-in vibration instrument and residual capacity of batteries with the corresponding LED indication.
- Periodic vibrating and LED alarm when residual battery capacity becomes less than 10 %.
- Automatic vibrating and LED alarm when residual battery capacity is less than 5 %, with the following switching-off of the warning device.
- Two АААА batteries.
- Shock-resistant plastic housing with IP67 ingress protection rating.
-
Features
- Fully automatic calibrator with built-in pump and controller
- Switchable internal pressure modules for expandable ranges
- Accuracy (1 year) of 0.02%FS
- External pressure modules available (measure only)
- Less than 4 lbs (1.8 kg) for handheld operation
- Source pressure, measure pressure and electrical
- 4 channels
- Optional HART communications
- Optional data logging and task documenting
- USB and Wi-Fi communication
- ISO 17025-accredited calibration w/data included
-
Features
- Pressurize large-volume workload
- Generate pressure to 40,000 psi (2,800 bar) pressure
- Increase and decrease pressure smoothly
- Three pressure ports
-
Features
- Supports multi-users and network environments
- Calibration and asset management
- Simple user interface
- Scanning and printing of QR codes
- User definable permissions and access levels
- Support various units
- Can calibrate variety pressure and temperature instruments
- Can calibrate several instruments at a time
- Calibration planning and scheduling
- Certificate management and creation
- Certificate customization
-
Features
- Pressurize large-volume workload
- Generate pressure to 15,000 psi (1,000 bar)
- Increase and decrease pressure smoothly
- Three pressure ports
- Hand-tight quick connectors
-
Features • Compatible to phosphoric acid ester fluid and Skydrol Oil • Increase and decrease pressure smoothly • Three pressure ports • Hand-tight quick connectors Applications The Additel 937 is designed to generate pressure from 85% vacuum to 15,000 psi (1000 bar) for the application requiring accurate pressure testing and calibration. It can be used in calibrating pressure gauges, transmitters, or other pressure measuring instruments.
-
Features • Portable, only 7 lb • Minimal maintenance • Increase and decrease pressure smoothly • Hand-tight quick connectors Applications The Additel 927 is designed to generate pressure from 85% vacuum to 10,000 psi (700 bar) for the application requiring accurate pressure testing and calibration. It can be used in calibrating pressure gauges, transmitters, or other pressure measuring instruments.
-
Features •Portable, only 3.7 lb • Minimal maintenance • Increase and decrease pressure smoothly • Hand-tight quick connectors Applications The Additel 925 Hydraulic Pressure Test Pump is designed to generate pressure from 85% vacuum to 6000 psi (400 bar) for the application requiring accurate pressure testing and calibration. It can be used in calibrating pressure gauges, transmitters, or other pressure measuring instruments.
-
Features
- Generate 3,000 psi (200 bar) in 40 seconds
- Minimal maintenance
- Hand-tight quick connectors
- First one in the world
-
Features
- Generate 2000 psi (140 bar) in 30 seconds
- Minimal maintenance
- Hand-tight quick connectors
- First one in the world
-
Features
- Portable, only 5.7 lb
- Great stability and high resolution
- Minimal maintenance
- Hand-tight quick connectors
-
Features
- Portable, only 5.7 lb
- Great stability and high resolution
- Minimal maintenance
- Hand-tight quick connectors
-
Features
- Portable, only 5.9 lb
- Great stability and high resolution
- Minimal maintenance
- Hand-tight quick connectors
-
Features
- Portable, only 3.3 lb
- Great stability and high resolution
- Minimal maintenance
- Hand-tight quick connectors