- Display Air Flow (CFM) or Air Velocity plus Temperature
- Metal vane withstands temperature up to 175°F (80°C) and airspeed to 6890ft/min
- Air Flow displayed in 3 modes: Instantaneous value, up to 20 point average or 2/3 flow value
- Record and Recall MIN, MAX
- Data Hold plus Auto power off
-
Feature -
Features- 25 Memory Groups
- Programmable
- Read Intervals, Start/Stop, Number Of Readings
- Digital Display In English And Metric Units
- 2000 Reading Memory With Date And Time Stamp
-
Feature- Simultaneous display of Air Flow or Air Velocity plus Ambient Temperature
- Easy to set Area dimensions (ft² or m²) are stored in the meter's internal memory for the next power on
- 20 point average for Air Flow
- 3% velocity accuracy via low friction 2.83"D (72mm) ball bearing vane wheel on 3.9ft (120cm) cable
-
Feature- CFM/CMM Thermo- Anemometer with built-in non-contact IR Thermometer measures remote surface temperatures to 500°F (260°C) with 8:1 distance to spot ratio and Laser Pointer
- Simultaneous display of Air Flow or Air Velocity plus Ambient Temperature
- Easy to set Area dimensions (ft² or m²) are stored in the meter's internal memory for the next power on
- Resolution of 0.01m/sec
- 20 point average for Air Flow
- Large (9999 count) LCD Backlit Display
- 3% velocity accuracy via low friction 2.83"D (72mm) ball bearing vane wheel on 3.9ft (120cm) cable
- Complete with vane sensor with 3.9ft (120cm) cable, 9V battery, and protective rubber holster
-
Feature- 4" (10cm) vane allows for more precise readings on larger size ducts
- Air Velocity, Air Flow, Relative Humidity, Wet Bulb and Dew Point
- Built-in thermistor for air temperature
- Multipoint and timed average calculations
- Min/Max, Data Hold, and Auto power off
- Complete with four AAA (1.5V) batteries and hard carrying case
-
Features:- Measuring Range 1000A
- With 0.1A High Resolution
- 1ms PEAK HOLD Function
- High Speed Bargraph
- DATA HOLD Function
- MAX/MIN/REL Function
- Auto Power Off
- Measuring Frequency From Current Clamp and Test Terminal
-
Features:- 4 Digital Display
- TRUE RMS
- Auto Power Off
- Peak Hold Function
- Data HoldFunction
- Auto Zero
-
Features:- 4 Digital Display
- 10uA Resolution
- Auto Power Off
- Autoranging
- Peak Hold Function
- Data HoldFunction
- Auto Zero
-
Features • With 0.01A High Resolution • Measuring Frequency From Current Clamp & Test Terminal • Inrush Function(250) • Back Light Function • Data Hold Function • Auto Power Off • Autoranging -
Features:- True RMS
- For HVAC
- Capacitor, DCµA, Temperature functions
- 1ms Peak Hold Function
- 0.01A High Resolution
- Data Hold Function
- Autoranging
- Measure frequency from current clamp and test terminal
- Backlit LCD
-
Feature- Air velocity measurement: m/s, km/hr, ft/min, MPH,
- Knots & build in temperature ºC / ºF, humidity %RH
- Air velocity compensation in atmospheric pressure
- Air flow measure: CMM, CFM
- Telescoping hot wire probe
- Fast response
- Large LCD display with backlight
- Min/Max/Avg & 2/3Vmax function
- With USB interface supply power
- Adjustable auto power off timer
- Data Hold function
- Battery Life indicator
- Tilt Stand
-
Features- Bump testing, calibration, configuration and data recording on a single station
- Fast–up to 3 units bumped or calibrated simultaneously
- Portable, using battery power for up to 3000 bump tests
- Upgrades Docking Firmware
- Robust–All-in-one hard case and data analysis
- With 32G SD card, more than 10,0000 sets data can be recorded
- Saves the bump ,calibration,configuration data in station and support U-disk connection for data and calibration report export
- Includes Safegas PC software for easy configuration
-
Features- Bump testing, calibration, configuration and data recording on a single station
- Fast–up to 4 units bumped or calibrated simultaneously
- Portable, using battery power for up to 3000 bump tests
- Upgrades Docking Firmware
- Robust–All-in-one hard case and data analysis
- With 32G SD card, more than 10,0000 sets data can be recorded
- Saves the bump ,calibration,configuration data in station and support U-disk connection for data and calibration report export
- Includes Safegas PC software for easy configuration
-
Features- Bump testing, calibration, configuration and data recording on a single station
- Fast–up to 1 units bumped or calibrated simultaneously
- Portable, using battery power for up to 3000 bump tests
- Upgrades Docking Firmware
- Robust–All-in-one hard case
- With 32G SD card, more than 10,0000 sets data can be recorded
- Saves the bump, calibration,configuration data in station and support U-disk connection for data and calibration report export
- Includes Safegas PC software for easy configuration and data analysis
-
Features:- Large measuring range
- High Precision
- Calibrated with water
- Display of measurement results in various units
- Automatic temperature compensation
- Robust casting
- Little weight
-
Features • Large measuring range • High precision • Calibrated with water • Display of measurement results in various units • Automatic temperature compensation • Robust casing • Little weight -
Features • Large measuring range • High precision • Calibrated with water • Display of measurement results in various units • Automatic temperature compensation • Robust casing • Little weight -
Features- Digtize designing suitable for measuring rotational speed and observing stationary images
- Button operation, widely measurement range and high accuracy
- Automatic record the last speed value when the power is turned off
- Three complete setup memory storage
-
Features:- Digtize designing suitable for measuring rotational speed and observing stationary images
- Button operation, widely measurement range and high accuracy
- Automatic record the last speed value when the power is turned off
- Three complete setup memory storage
-
Features:- Digtize designing suitable for measuring rotational speed and observing stationary images
- Button operation, widely measurement range and high accuracy
- Automatic record the last speed value when the power is turned off
- Three complete setup memory storage
-
Features:- Digitize designing suitable for measuring rotational speed and observing stationary images
- Button operation, widely measurement range and high accuracy
- Automatic record the last speed value when the power is turned off
- Three complete setup memory storage
- Timer function 1, 5, 10 minutes or sustained (DS-9000 only)
-
Features- VCHEK LoZ low impedance measurement function to test for either AC or DC voltage, or show continuity if voltage is not detected.
- Large backlit display
- CAT IV 600 V safety rated
-
Features- Ideal Digital Multimeter for “go/no-go” testing
- Features AutoVolt automatic AC/DC voltage selection
- Includes low input impedance to help prevent false readings due to ghost voltage
- Presents a large white LED backlight for working in poorly lit areas
- Measures resistance and continuity
- Provides Min/Max/Average with elapsed time to record signal fluctuations
-
Features- Compact True-RMS digital multimeter for field service
- Includes: meter, holster, 4 mm silicone test lead set
- Easy one-handed operation of the meter
- Min/Max/Average to record signal fluctuations
-
Features- Digital multimeter designed specifically for HVAC professionals
- Includes built-in thermometer to measure temperature from -40°C to 400°C (-40°F to 752°F)
- Provides microamps to test flame sensors
- Features low input impedance to helps prevent false readings due to ghost voltage
- Presents a large white LED backlight for working in poorly lit areas
-
Features- Compact, true-rms digital multimeter for electricians
- Includes multimeter, 4mm silicone test leads, holster and manual
- Integrated non-contact voltage detection keeps you safe
- Prevent false readings from ghost voltage with selectable low-impedance mode
-
Features- Rugged, compact advanced insulation resistance tester for electrical contractors and industrial and commercial electricians
- Automatically calculates Polarization Index and Dielectric Absorption Ratio
- Makes repetitive tests simple and easy with a Compare (Pass/Fail) function
- Offers multiple insulation test voltages: 50 V, 100 V, 250 V, 500 V, and 1000 V
-
Features- Auto discharge of capacitive voltage
- AC/DC voltage
- DC millivolts
- AC/DC milliamps
- Continuity
- Auto power off to save battery power
- True RMS
- Large display with backlight
- Live circuit detection prevents insulation test if voltage <30 V is detected for added user protection
- CAT III 1000V, CAT IV 600V measurement category
-
Features- PI/DAR timed ratio tests
- Live circuit detection prevents insulation test if voltage >30 V is detected for added user protection
- VFD low-pass filter for accurate motor drive measurements
- Auto-discharge of capacities voltage for added user protection
- Insulation test of 0.01 MΩ to 2 GΩ
- Insulation test voltages of 50, 100, 250, 500 V for many applications
- AC/DC voltage, DC millivolts, AC/DC milliamps, resistance (Ω), continuity
- Capacitance, diode test, temperature, Min/Max, frequency (Hz)
- Auto power off to save battery power
- CAT III 1000 V, CAT IV 600 V measurement category
- Large display with backlight
- Safety first. Keep yourself out of harm's way by monitoring your test measurements remotely
- Prove your job is done right by quickly seeing and sharing measurement results wirelessly with your smartphone
- Quickly find problems by saving and comparing measurements over time on a wireless device
-
Features- True-RMS digital multimeter with the features professional technicians prefer
- Increases productivity with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recording
- Measures AC and DC voltage to 1000 V
- Delivers accurate True-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode measurements
- Safety rated CAT III 1000 V, CAT IV 600 V
-
Features- 1000V AC/DC; 10A AC/DC (with test leads and current jacks); resistance to 50 MΩ; capacitance to 10,000 μF, frequency to 100 kHz; temperature from -40 ℃ to 400 ℃
- Robust, fast and accurate with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-Average recording
- Backlit digital display, analog bar graph, and built-in temperature measurements with included thermocouple.
-
Features- IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
- Designed to withstand 3 meter drop (with holster)
- Unique function for accurate
-
Features- Rugged, reliable basic True-RMS clamp meter for measuring current up to 400 A
- Measures AC current to 400 A
- Measures AC voltage and DC voltage to 600 V
- Provides True RMS AC voltage and current for accurate measurements on non-linear signals
- Measures resistance to 4 kΩ with continuity detection
-
Features- Rugged, reliable basic True-RMS clamp meter for measuring current up to 400 A
- Measures AC current to 400 A
- Measures AC voltage and DC voltage to 600 V
- Provides True RMS AC voltage and current for accurate measurements on non-linear signals
- Measures resistance to 4 kΩ with continuity detection
-
Features- True-rms AC/DC current, voltage, temperature, frequency
- Clamp meter, test leads, K-type thermocouple and soft case
- Versatile tool performs most front-line measurement tasks
-
Features- Large display
- Backlight for work in dim areas
- Min / Max to record signal fluctuations
- Ergonomic overmolded housing with integrated probe holders
- Free your hands with the optional TPAK magnetic hanger
- Auto and Manual ranging
- Meets Measurement Category 1000 V CAT III and Category IV 600 V safety standards
-
Features- Identify complex signal problems fast
- Supports accurate measurements on VFDs using a low-pass filter
- Captures intermittents as fast as 250 µS with Peak Capture
-
Features- One pair (red, black) comfort grip probes with silicone insulated, right-angle test leads
- Recommended for µV measurements
- CAT II 1000 V, 10 A rating
- CAT III 1000 V, CAT IV 600V only with protective cap
-
Features- Small size for mobile use
- Automatic temperature compensation
- High resolution of the scale areas
- Robust and compact design
- Easy calibration and adjustment
-
Application • Beverages • Food • Sugar / sweeteners • Chemicals • Flavours • Petrochemicals • Cosmetics / hygiene • Metalworking • Pharmaceuticals • Water / effluent • Education / research -
Features- Small size for mobile use
- Automatic temperature compensation
- High resolution of the scale areas
- Robust and compact design
- Easy calibration and adjustment
-
Features- Small size for mobile use
- Automatic temperature compensation
- High resolution of the scale areas
- Robust and compact design
- Easy calibration and adjustment
-
Features- Small size for mobile use
- Automatic temperature compensation
- High resolution of the scale areas
- Robust and compact design
- Easy calibration and adjustment
-
Features- Small size for mobile use
- Automatic temperature compensation
- High resolution of the scale areas
- Robust and compact design
- Easy calibration and adjustment
-
Features- Small size for mobile use
- Automatic temperature compensation
- High resolution of the scale areas
- Robust and compact design
- Easy calibration and adjustment
-
Features- Small size for mobile use
- Automatic temperature compensation
- High resolution of the scale areas
- Robust and compact design
- Easy calibration and adjustment
-
Features- Small size for mobile use
- Automatic temperature compensation
- High resolution of the scale areas
- Robust and compact design
- Easy calibration and adjustment
-
Features- Small size for mobile use
- Automatic temperature compensation
- High resolution of the scale areas
- Robust and compact design
- Easy calibration and adjustment
-
Application • Beverages • Food • Sugar / sweeteners • Chemicals • Flavours • Petrochemicals • Cosmetics / hygiene • Metalworking • Pharmaceuticals • Water / effluent • Education / research -
Features- IP66/IP68 water & dust resistant and 1.5 meters drop resistant case, rugged and durable designs
- Compact, lightweight, small size with back clip, ergonomic and wearable design
- Standard man down alarm, password protection, ID identification function
- Real time value, TWA, STEL, MAX, MIN multiple numerical display
- With self-test function, which can improve safety by automatic self-test
- Standard 1000 data records and 100 events records
- Support firmware upgrade remotely
- With docking station to perform daily bump test and calibration (Optional)
- Wireless data transmission including Lora, Bluetooth (Optional)
- Low power consumption, battery run time is up to 24 hours per charge
-
Feature- Numerous connectivity solutions. Compact and lightweight.
- Strong, protective, concussion-proof design.
- Real-time gas concentration readings, location, alarm, and status enabled by state-ofthe-art wireless technology.
- IP67 water and dust resistant case
- Five-way local and remote notification of alarm conditions. Short bump test and calibration time. Global approval for worldwide acceptance
- Filtered LEL sensor options to inhibit sensor poisoning. Compatible with Safety Communicator. Device Management with Honeywell Safety Suite
-
Features- IP68 water- and dust-resistant case
- Low power consumption with 2 years standby time, no need battery charge and calibration
- With Single /multi unit docking station to perform daily bump test and calibration (Optional)
- With event and data logging function(optional)
- With self-test function, which can improve safety by automatic self-test
- Small size, light weight and with back clip for easily carry
- 95db@30cm buzzer alarm, 2 high-bright red LED light alarm and vibration alarm
- · Real time value, TWA, STEL, MAX,MIN multiple numerical display
-
Features- Quick scans of electrical equipment, machinery and other assets
- Enterprise Wi-Fi
- Fully radiometric thermal imager gives you measurement data to the pixel with 120 x 90 infrared resolution (10,800 pixels)
- -4 to 302°F (-20 to 150°C) temperature measurement range
- Manual level and span
-
Feature- Features real-time gas concentration readings and alarm status
- Large graphic display’s icon-driven interface rotates 180°, for added convenience
- User-friendly design allows easy access to pump, sensors, filter, and battery compartment
- Wireless unit provides 5-way remote notification of alarm conditions
- Equipped with “man down” alarm with pre-alarm and real-time remote wireless notification
- Measures 5.5" x 3.2" x 1.5" and weighs 12.9 oz.
- Li-ion battery provides a 10 hour battery life
- Features visual, audible, and vibrating alarms
- Gas ranges LEL 0-100%, O2 0-30%, CO 0-500 ppm, and H2S 0-100 ppm
- Intrinsic safety Class 1, Div 1, Groups A, B, C, D; IECEx/ATEX (II 1 GEx ia IIC T4)
- EchoView Host wireless mini-controller item# 102334, sold separately
- Minimum of 1 Echo View is required for wireless communication
-
Feature- Features real-time gas concentration readings and alarm status
- Large graphic display’s icon-driven interface rotates 180°, for added convenience
- User-friendly design allows easy access to pump, sensors, filter, and battery compartment
- Wireless unit provides 5-way remote notification of alarm conditions
- Equipped with “man down” alarm with pre-alarm and real-time remote wireless notification
- Measures 5.5" x 3.2" x 1.5" and weighs 12.9 oz.
- Li-ion battery provides a 10 hour battery life
- Features visual, audible, and vibrating alarms
- Gas ranges LEL 0-100%, O2 0-30%, CO 0-500 ppm, and H2S 0-100 ppm
- Intrinsic safety Class 1, Div 1, Groups A, B, C, D; IECEx/ATEX (II 1 GEx ia IIC T4)
- EchoView Host wireless mini-controller item# 102334, sold separately
- Minimum of 1 Echo View is required for wireless communication
-
Feature- Display Air Flow (CFM) or Air Velocity plus Temperature
- Metal vane withstands temperature up to 175°F (80°C) and airspeed to 6890ft/min
- Air Flow displayed in 3 modes: Instantaneous value, up to 20 point average or 2/3 flow value
- Record and Recall MIN, MAX
- Data Hold plus Auto power off
-
Features- Optional data logging function to export data to PC through USB wire
- LCD dot matrix display, support backlight function Built-in sampling pump
- Explosion-proof certified, explosion-proof grade: E x i a IIC T4 Ga
- With Span-calibration and zero calibration functions, makes the detection more accurate and reliable.
- One press to res tore factory setting
-
Features- Adopting world-wide reputation brand of gas sensor
- Detect 1-4 kinds of gases, gas type can be specified, dust particle sensor and temperature & humidity sensor can be added
- Multiple display interfaces, including gas concentration mode, dust weight mode and Particle count mode which can be switched arbitrarily
- Up to 6 particle sizes can be detected at the same time to meet a variety of detection needs
- Support one-key switching between Chinese and English language
- Built-in powerful sampling pump, can work in a slightly negative pressure environment
- Explosion proof certified, explosion proof grade：ExiaⅡCT4
- Unique design with lightweight, its shell is made of high-strength engineering plastic material, non-slip, waterproof, dustproof, explosion-proof
- One press to restore factory setting, free from the bother of mis-operation
- With temperature and pressure compensation, can compensate gas concentration under different temperatures or pressures conditions
- Durable and exquisite aluminum alloy
-
Features- IP67 water & dust resistant and 3 meter drop resistant case, rugged and durable designs.
- Standard man down alarm function
- Real time value, TWA, STEL, MAX, MIN multiple numerical display
- One press to restore factory settings.
- Large graphical display can rotate 180°
- Standard water trap filter to protect the sensor
- With docking station to perform daily bump test and calibration (Optional)
- Wireless data transmission including Lora,
- Bluetooth (Optional)
- Support backlight function the backlight time can be manually set
- Low power consumption, long stand by time
- Support firmware upgrade remotely
-
Features- Rugged and durable
- Explosion-proof circuit design, safe and reliable
- Multiple security protection
- Simultaneous measurement of multiple gases, multiple numerical display
- Large screen display, flexible detection system, multiple filtering devices
- Powerful function, more user-friendly operation
-
Features- Support long distance wireless data communication, with a distance of up to 3 kilometers
- Provide flexible communication protocols that can connect multiple detection devices through serial ports
- Built-in Bluetooth module, which can wirelessly connect to other Bluetooth devices
- Integrated GPS receiver provides global satellite positioning function
- Display wireless signal strength, GPS status, and battery information
- Rechargeable lithium batteries provide long-term operation
- Rugged impact resistant housing
-
Features- Support to monitor 1-18 gas types3.5-inch color LCD display support both real time data and chart, user friendly
- Built-in pump gas sampling, faster response. Equipped with multi-layer filtering, protect sensor from oil, water vapour, dust.
- Standard 32G SD memory card to store and export data by U-disk easily
- Support Lora and other wireless communication (Optional)
- Support built-in printer for real time data printing (Optional)
- High temperature, high humidity environment measurement (Optional)
-
Feature- Simple, fast and precise flow measurement and volume flow calculations in ventilation ducts
- More flexibility for duct measurements with the cable connected telescopic probe (maximum length 33 in.)
- Fast in-app (duct) configuration, graph history, second screenand measurement data memory in the testo Smart App
- Timed and point mean value calculation
- Durability through compact design with robust housing
-
Features- Volume flow hood for larger swirl outlets for measuring volume flow, temperature and relative humidity
- Impressively light with a weight of 2.9 kg
- Precise measurement even at swirl outlets thanks to integrated volume flow straightener
- Fast set-up, convenient operation and protocol creation on site using the App
-
Feature- Increased sensitivity to visualize temperature differences
- Easier to visualize and diagnose issues with sharper onscreen images, multiple rectangle markers and 9 color palettes
- More intuitive visual interface, improved, user-tested, touch screen interface
- More flexibility to visualize target, tiny-to-large with interchangeable smart lenses - no calibration required, 2x and 4x telephoto, wide angle and macro lens compatibility
- Capture a clear, accurate image focused throughout the field of view with MultiSharp™ Focus
- Get an instant in-focus image of your designated target. LaserSharp® Auto Focus uses a built-in laser distance meter that calculates and displays the distance from your designated target.
- Get 4x the pixel data with SuperResolution, which captures multiple images and combines them to create a 1280 x 960 image
- Save time - wirelessly sync images directly from your camera to the Fluke Connect® system, and attach to an asset record or work order
- Reduce the need take notes in the field with IR-PhotoNotes™ and voice annotations
- Subject to Export Control
-
Features- Easily and quickly identify problems before they become expensive failures
- See the details with improved resolution that delivers the right image quality you need to make the proper diagnosis with 2.5 times more pixels
- See more clearly than before and analyze faster with picture-in-picture and blending at different preset levels to capture incredibly detailed images that help identify potential issues
- Clearly see what you are inspecting with 3.5 inch 320 x 240 LCD - 33% more viewing area compared to 3.0 inch LCD screen
- Simple, easy to use point and shoot technology automatically focuses from 0.45m (1.5ft) and beyond
- Fluke Connect with ShareLive video call is the only wireless measurement system that lets you stay in contact with your entire team without leaving the field. The Fluke Connect mobile app is available for Android (4.3 and up) and iOS (4s and later)
-
Feature- IR Fusion® technology with AutoBlend™ mode blends visual and infrared images so you can see the details crucial to identifying potential problems
- IR-PhotoNotes™ makes it quick and simple to document critical information by allowing you to add up to 3 digital images to your thermal image
- Use voice annotation to document what you're looking at, even in dark spaces, or to capture non-visible surrounding details
- Save time by using color alarms to set temperature thresholds; conduct a quick scan and easily diagnose irregularities
- Fluke Connect® enabled so you can capture and share reliable data you can trust and trace
-
Feature- Manual focus infrared camera with professional grade 320x240 resolution (76,800 pixels)
- Captures optimal images from as close as 0.15m (6in)
- Provides a D:S of 514:1
- Offers temperature measurement range from -20 °C to 550 °C (–4 °F to 1022 °F)
- Includes built-in laser pointer
- Displays images on a 3.5 inch, 320x240 LCD
- Offers five presets of IR-Fusion® with AutoBlend and PIP to help find problems fast
- Captures visible light images with built-in 5 megapixel industrial performance digital camera
- Includes a smart battery system that allows you to easily monitor your battery charge level with five-segment LED display
- Allows real-time communication by email from your smart phone with Fluke Connect®*
- Stores thousands of images—4 GB internal memory and included 4 GB micro SD card
-
Features- Online monitoring
- Convenient remote control
- Diversified output signals
- Relay control
- Data transmission to PC
- Durable housing
-
Features- Online monitoring with sound/light alarm (Optional)
- Convenient remote control
- Diversified output signals
- Relay control
- Data transmission to PC
- Durable housing
-
Features- With internal suction pump, fast response
- Up to 6 kinds of gases can be detected simultaneously in 1 device. Easy and cost-effective for installation and maintenance.
- 2.4-inch industrial-grade high-definition color screen with a resolution of 320*240 and a wide viewing angle of 120 degrees.
- With wireless communicate function, real time data can be uploaded to cloud platform, user can check data and receive SMS alarm alert in real time on mobile phones and computers.(optional)
- With manually span and zero calibration function, making gas monitoring more accurate and more reliable.
- Standard 4-20mA analog signal, RS485 modbus signal and relay signal output, optional HART output.
- Standard infrared remote control, optional non-contact magnetic wand control to modify the detector settings.
- With sound and light alarm function, there is sound and light alarm when reaching the alarm point.(optional)
- HD color display, easy operation and user friendly.
- With faulty alarm, will send alarm when there is faulty.
- IP66 protection grade, water proof and dust proof
-
Features- With internal suction pump, fast response
- Up to 6 kinds of gases can be detected simultaneously in 1 device. Easy and cost-effective for installation and maintenance.
- 2.4-inch industrial-grade high-definition color screen with a resolution of 320*240 and a wide viewing angle of 120 degrees.
- With wireless communicate function, real time data can be uploaded to cloud platform, user can check data and receive SMS alarm alert in real time on mobile phones and computers.(optional)
- With manually span and zero calibration function, making gas monitoring more accurate and more reliable.
- Standard 4-20mA analog signal, RS485 modbus signal and relay signal output, optional HART output.
- Standard infrared remote control, optional non-contact magnetic wand control to modify the detector settings.
- With sound and light alarm function, there is sound and light alarm when reaching the alarm point.(optional)
- HD color display, easy operation and user friendly.
- With faulty alarm, will send alarm when there is faulty.
- IP66 protection grade, water proof and dust proof