Loading...
  • Features
    • Industry-leading measurement precision
    • Interchangeable high-accuracy probes for T, RH, and CO2
    • 30-day memory buffer
    • Typical battery life of 18 months in RH and T measurement
    • Uses standard alkaline batteries
    • Probe calibrations are traceable to SI units through national metrology institutes or accredited calibration laboratories
    • Cost-effective alternative to chart recorders
  • Features
    • Remote continuous computer-aided radiation monitoring of the environment.
    • Receipt of measurement results of ambient dose equivalent rate (DER) from the BDBG-09 detection units, ambient temperature values, and service information (serial number, results of self-testing) and data transfer to the server by GPRS channel.
    • Display of measurement results in real-time mode, in numerical and/or graphical form, obtained from monitoring points located at a considerable distance.
    • Possibility to set a different threshold level of alarm for each of the monitoring points.
    • Generation of emergency and warning notifications when DER measurement results of the specified threshold levels are exceeded.
    • Storage of measurement results received from monitoring points, emergency and warning notifications to the database.
    • Display of saved measurement results from monitoring points, emergency and warning notifications recorded in the database.
    • Storage of information received from the detection units BDBG-09 when disconnected from a remote fixed server, and its subsequent transfer when reconnected.
    • Possibility to expand functionality through the integration of devices, equipped with RS-485 interface (e.g., weather stations or other types of detectors with the appropriate adaptation of application software).
    • Possibility to connect the IT-09 (T) panel directly in the monitoring point installation for the radiation situation assessment.
    • Autonomous operation of monitoring points without an external supply voltage of 220 V. The system is equipped with an uninterruptible power supply.
    • Use of SCADA software capabilities and benefits when using a server component, including report generation and printing.
  • Feature
    • Features real-time gas concentration readings and alarm status
    • Large graphic display’s icon-driven interface rotates 180°, for added convenience
    • User-friendly design allows easy access to pump, sensors, filter, and battery compartment
    • Wireless unit provides 5-way remote notification of alarm conditions
    • Equipped with “man down” alarm with pre-alarm and real-time remote wireless notification
    • Measures 5.5" x 3.2" x 1.5" and weighs 12.9 oz.
    • Li-ion battery provides a 10 hour battery life
    • Features visual, audible, and vibrating alarms
    • Gas ranges LEL 0-100%, O2 0-30%, CO 0-500 ppm, and H2S 0-100 ppm
    • Intrinsic safety Class 1, Div 1, Groups A, B, C, D; IECEx/ATEX (II 1 GEx ia IIC T4)
    • EchoView Host wireless mini-controller item# 102334, sold separately
    • Minimum of 1 Echo View is required for wireless communication
  • Feature
    • Features real-time gas concentration readings and alarm status
    • Large graphic display’s icon-driven interface rotates 180°, for added convenience
    • User-friendly design allows easy access to pump, sensors, filter, and battery compartment
    • Wireless unit provides 5-way remote notification of alarm conditions
    • Equipped with “man down” alarm with pre-alarm and real-time remote wireless notification
    • Measures 5.5" x 3.2" x 1.5" and weighs 12.9 oz.
    • Li-ion battery provides a 10 hour battery life
    • Features visual, audible, and vibrating alarms
    • Gas ranges LEL 0-100%, O2 0-30%, CO 0-500 ppm, and H2S 0-100 ppm
    • Intrinsic safety Class 1, Div 1, Groups A, B, C, D; IECEx/ATEX (II 1 GEx ia IIC T4)
    • EchoView Host wireless mini-controller item# 102334, sold separately
    • Minimum of 1 Echo View is required for wireless communication
  • Features
    • °F/°C configurable
    • 2" antifog backlit display
    • Intelligent stabilization alert
    • Ambidextrous display
    • Antimicrobial coating
    • Motion-backlight activation
    • IP65 splash resistant
  • Features
    • Quick scans of electrical equipment, machinery and other assets
    • Enterprise Wi-Fi
    • Fully radiometric thermal imager gives you measurement data to the pixel with 120 x 90 infrared resolution (10,800 pixels)
    • -4 to 302°F (-20 to 150°C) temperature measurement range
    • Manual level and span
  • Features
    • PTB330 digital barometer for accurate pressure measurement
    • Handheld MI70 indicator with a user-friendly, multilingual display
    • Service port for MI70 Link software or computer
    • Vaisala HUMICAPâ humidity and temperature probe HMP155
    • Weatherproof transport case
  • Features
    • °F/°C configurable
    • No calibration needed
    • 1.5" display
    • Sleep mode
    • Magnetic attachment
    • Zeomic antimicrobial coating
    • Ø 1.6mm tapered tip
    • IP65 splash resistant
  • Feature
    • Real time monitor: CO2/TVOC/PM2.5/PM1.0/Temp/Humidity
    • Smart App Data logger/export
    • 7" Big LCD Display
    • Adjustable screen light
    • IoT controller/RS485/Relays
    • Alarm Notifications
    • Auto or Manual Calibration
    • Accurate NDIR sensor
  • Feature
    • Repid Measurement
    • Auto-Calibration
    • Alarm Memory
    • Smoke Alarm
    • CO2 Alarm
    • WiFi
  • Features
    • New generation high sensitivity CsI scintillation detectors of gamma and LiI of neutron radiation with solid state (silicon) photomultiplier.
    • Color display with high resolution.
    • Integrated GPS/GLONASS-receiver.
    • No “microphone effect”.
    • High thermal stability.
    • Audio and vibration alarm of threshold levels exceeding.
    • Threshold alarm system with four independent threshold levels: – search threshold level (threshold level of count rate from the detector photon and neutron ionizing radiation); – safety threshold level (threshold level of photon ionizing radiation DER); – accumulated dose threshold level.
    • Light color alarm (indication) of threshold levels exceeding (gamma radiation – red color, neutron – blue) and visual alarm on the side of the device.
    • The dosimeter communicates with a PC via USB-port.
    • Powered by built-in lithium polymer storage battery that can be charged via USB-cable.Ingress protection rating IP67.
  • Features
    • Resolution 0.001 ° C, accuracy of 0.01
    • Highly intelligent and easy to operate
    • AC Power abrupt change feedback
  • Characteristic
    • Low pressure humidifiers work by spraying water through centrifugal force. Unlike high-pressure systems, the water is sprayed into the room in the form of a very fine mist (water droplets below 20 μ) which evaporates immediately - resulting in minimal limescale build-up.
    • The humidification capacity is constant and independent of temperature and humidity level.
    • Control of an external mechanical hygrostat (option)
    • Adjustable capacity from 1 to 7 l / h
    • It reduces electrostatic charges
    • IP 56
  • Features
    • °F/°C configurable
    • Backlit display
    • Set HI\LO temperature brackets for both sensors
    • Set target temperatures for both sensors
    • Magnetic attachment
    • Timer, stopwatch, and resting alarm
    • IP65 water resistant
     
  • Features
    • Measurements are traceable to the International System of units (SI) through national metrology institutes.
    • Software options include vLog for Validation/Mapping and viewLinc continuous monitoring and alarming.
    • The Vaisala OPC-DA Server software can be used to integrate Vaisala DL-series data loggers to non-Vaisala systems
  • Features
    • Measurement independent of oil type, age and temperature - indicates margin to oil saturation
    • In-line process checking through ball valve, no need to drain the oil
    • Rugged and reliable construction
    • Multi-probe operation; dewpoint and CO2 probes can also be connected
    • Vaisala HUMICAP Sensor - proven field performance since 1973
  • Features
    • Possibility to measure ambient dose equivalent rate (DER) of gamma radiation with the detector which is built in the control panel.
    • Automatic selection between measurement intervals and ranges.
    • Audio signalling of each registered gamma-quantum or beta particle.
    • Backlit indicator and control keys for operation in the dark.
    • Rechargeable lithium-ion battery charging by the built-in charger from: – internal solar battery; – 12 V automobile battery; – 220 V/50 Hz mains power using a voltage converter.
    • Multilevel indication of battery discharge.
    • Operates under conditions involving atmospheric precipitation, dusty atmosphere (IP67).
    • Analog indicator of radiation intensity.
    • Logging of up to 1500 measurement results tagged to location coordinates in the nonvolatile memory via infrared port to the PC (built-in GPS/GLONASS receiver).
    • Viewing of logged measurement results on the display.
    • Easy to operate even if wearing personal protection – rubber gloves.
    • Wide operating temperature range – from -30…+55°C.
    • Display temperature resistance – +95°C.
    Detector types
    • Gas-discharge Geiger-Muller counters without return run of counting response
    • Silicon beta radiation detector
  • Features
    • IP68 water- and dust-resistant case
    • Low power consumption with 2 years standby time, no need battery charge and calibration
    • With Single /multi unit docking station to perform daily bump test and calibration (Optional)
    • With event and data logging function(optional)
    • With self-test function, which can improve safety by automatic self-test
    • Small size, light weight and with back clip for easily carry
    • 95db@30cm buzzer alarm, 2 high-bright red LED light alarm and vibration alarm
    • · Real time value, TWA, STEL, MAX,MIN multiple numerical display 
  • Feature
    • Numerous connectivity solutions. Compact and lightweight.
    • Strong, protective, concussion-proof design.
    • Real-time gas concentration readings, location, alarm, and status enabled by state-ofthe-art wireless technology.
    • IP67 water and dust resistant case
    • Five-way local and remote notification of alarm conditions. Short bump test and calibration time. Global approval for worldwide acceptance
    • Filtered LEL sensor options to inhibit sensor poisoning. Compatible with Safety Communicator. Device Management with Honeywell Safety Suite
  • Features
    •  IP66/IP68 water & dust resistant and 1.5 meters drop resistant case, rugged and durable designs
    • Compact, lightweight, small size with back clip, ergonomic and wearable design
    • Standard man down alarm, password protection, ID identification function
    • Real time value, TWA, STEL, MAX, MIN multiple numerical display
    • With self-test function, which can improve safety by automatic self-test
    • Standard 1000 data records and 100 events records
    • Support firmware upgrade remotely
    • With docking station to perform daily bump test and calibration (Optional)
    • Wireless data transmission including Lora, Bluetooth (Optional)
    • Low power consumption, battery run time is up to 24 hours per charge
  • Features:
    • Moisture measurement and control
    • 4~20 mA or 0~2 Vdc output
    • IP65 watertight enclosure, stainless steel probe
    • Custom calibration for measuring object
    • Wide supply voltage: 12 ~ 40 Vdc
    • Easy mounting and quick wiring
     
  • Features:
    • Moisture measurement and control
    • 4~20 mA or 0~2 Vdc output
    • IP65 watertight enclosure, stainless steel probe
    • Custom calibration for measuring object
    • Wide supply voltage: 12 ~ 40 Vdc
    • Easy mounting and quick wiring
     
  • Features:
    • High accurate, fat response
    • Auto temperature compensation
    • Data-Hold / Max. / Min.
    • Auto power off
    • Built-in calibration (CAL) function
    • Drop/dust-proof, long term stability
     
  • Features:
    • Built-in multifunction
    • Suitable different type of probes
    • 8 type of wood calibrations scales
    • Data-Hold, Max./Min.
    • Built-in calibration
    • Easy to operate, long-term stability
     
  • Features:
    • Multi-color LED Bar-Graph readout
    • 5.5% to 100% Moisture Range
    • 0~1 Vdc Signal Output
    • Audible alert when value is detected
    • Built-in calibration function
    • Sturdy and durable moisture probe
    • CE and RoHS Approved
  • Features:
    • Digital LCD display with backlight
    • 5.5% to 99.9% Range, 0~1 V
    • Stored up to 99 readings
    • 8 wood groups build in
    • Max./Min./Average values recalled
    • Built-in calibration
    • Changeable of extension probe
    • CE and RoHS Approved
     
  • Features
    • Large display for actual measurement
    • Max./ Min./ AVG indication
    • External temperature probe input
    • Battery status indication
    • Easy to use Window software
    • Visual and acoustic Hi-Lo Alarm
    • Adjustable logging interval from 1 second to 24hours
    • Easy to change battery
  • Features
    • Large display for actual measurement
    • Max./ Min./ AVG indication
    • External temperature probe input
    • Battery status indication
    • Easy to use Window software
    • Visual and acoustic Hi-Lo Alarm
    • Adjustable logging interval from 1 second to 24hours
    • Easy to change battery
  • Features
    • Stainless Steel Sensor
    • Nominal pressure: 0 ... 1 mH2O up to 0 ... 100 mH2O
    • Accuracy: 0.35 % (opt. 0.25 %) FSO
    • Diameter 35 mm
    • Cable and sensor section detachable
    • Excellent linearity
    • Small thermal effect
    • Integrated lightning protection and increased over voltage protection; 8 kA gas discharge tube (8/20 μsec); 4 kV surge l-l/l-e according to EN61000-4-5
    Optional Features
    • SIL 2 (safety integrity level) according to IEC 61508 / 61511
    • different kinds of cable and elastomeres
    • customer specific versions e.g. special pressure ranges
    Areas of Application
    • Energy Industry
    • Environmental Industry
  • Features
    • Stainless Steel Sensor
    • Nominal pressure: 0 ... 400 mbar up to 0 ... 40 bar
    • Accuracy: 0.1 % FSO
    • Thermal error in compensated range -20 … 80 °C: 0.2 % FSO TC 0.02 % FSO / 10 K
    • Turn-down 1:10
    • Communication interface for adjusting of offset, span and damping
    Optional Features
    • IS-version (Ex ia = intrinsically safe for gases and dusts)
    • Adjustment of nominal pressure gauges (factory-provided)
    Areas of Application
    • Chemical Industry
    • Environmental Industry
  • Features
    • Stainless Steel Sensor
    • Nominal pressure: 0 ...4 mH2O up to 0...200 mH2O
    • Accuracy: 0.1 % FSO
    • Diameter 35 mm
    • Cable and sensor section detachable
    • Thermal error in compensated range -20...70°C: 0.2 FSO TC 0.02% FSO/10K 0,02 % FSO / 10K
    • High Accuracy
    • Communication connection
    • turn-down 1:10
    Optional Features
    • IS-version (Ex ia = intrinsically safe for gases and dusts)
    • SIL 2 application according to IEC 61508 / IEC 61511
    • Different electrical connections
    • Customer specific versions e.g. special pressure range
    Areas of Application
    • Mechanical and Plant Engineering
    • Energy Industry
    • Environmental Industry
  • Features
    • Stainless Steel Sensor
    • Nominal pressure range from 0 ... 4 mH2O up to 0 ... 200 mH2O
    • Accuracy: 0.1 % FSO
    • Diameter 35 mm
    • Cable and sensor section detachable
    • Thermal error in compensated range -20...70°C: 0.2 FSO TC 0.02% FSO/10K 0,02 % FSO / 10K
    • High accuracy
    • Communication connection
    • Turn-down 1:10
    Optional Features
    • IS-version (Ex ia = intrinsically safe for gas and dust)
    • Mounting accessories as cable gland and terminal clamp in stainless steel
    • Different kinds of cables
    • Different kinds of seal materials
    Areas of Application
    • Energy Industry
    • Environmental Industry
  • Features
    • Stainless Steel Sensor
    • Nominal pressure range from 0 ... 1 mH2O up to 0 ... 250 mH2O
    • Accuracy: 0.35 % (opt. 0.25% / 0.1 %) FSO
    • Diameter 35 mm
    • Cable and sensor section detachable
    • Excellent long term stability
    • High accuracy
    Optional Features
    • IS-version (Ex ia = intrinsically safe for gas and dust)
    • SIL 2 (Safety integrity level)
    • Customer specific versions
    • Mounting accessories as cable gland and terminal clamp of stainless steel
    • Different kinds of cables
    • Different kinds of seal materials
    Areas of Application
    • Energy Industry
    • Environmental Industry
     
  • Features
    • Nominal pressure: 0 ... 1 mH2O up to 0 ... 250 mH2O
    • Nominal temperature from 0 ... 30 °C up to 0 ... 70 °C
    • Accuracy: 0.35 % (opt. 0.25 %) FSO
    • Diameter 26.5 mm
    • Separate output signals for pressure and temperature ranges
    • Easy handling
    • low maintenance and wiring costs
    Optional Features
    • Drinking water certificate acc. to DVGW and KTW
    • Different kinds of cables
    • Different kinds of elastomers
    • Customer specific versions
    Areas of Application
    • Energy Industry
    • Environmental Industry
  • Features
    • Nominal pressure: 0 ... 4 mH2O up to 0 ... 200 mH2O
    • Accuracy: 0,1 % FSO
    • Diameter 26,5 mm
    • Small thermal effect
    • Excellent accuracy
    • Excellent long term stability
    Optional Features
    • IS-version (Ex ia = intrinsically safe for gas and dust)
    • Drinking water certificate according to DVGW and KTW
    • Different kinds of cables
    • Different kinds of seal materials
    Areas of Application
    • Energy Industry
    • Oil and Gas Industry
    • Environmental Industry
  • Features
    • Stainless Steel Sensor, Stainless Steel Probe
    • Nominal pressure: 0 ... 1 mH2O up to 0 ... 250 mH2
    • Accuracy: 0.35 % (opt. 0.25% / 0.1 %) FSO
    • Diameter 26.5 mm
    • Small thermal effect
    • Excellent long term stability
    • High Accuracy

Title

Go to Top