- Measurement independent of oil type, age and temperature - indicates margin to oil saturation
- In-line process checking through ball valve, no need to drain the oil
- Rugged and reliable construction
- Multi-probe operation; dewpoint and CO2 probes can also be connected
- Vaisala HUMICAP Sensor - proven field performance since 1973
-
Features -
Features- Measurements are traceable to the International System of units (SI) through national metrology institutes.
- Software options include vLog for Validation/Mapping and viewLinc continuous monitoring and alarming.
- The Vaisala OPC-DA Server software can be used to integrate Vaisala DL-series data loggers to non-Vaisala systems
-
Features- °F/°C configurable
- Backlit display
- Set HI\LO temperature brackets for both sensors
- Set target temperatures for both sensors
- Magnetic attachment
- Timer, stopwatch, and resting alarm
- IP65 water resistant
-
Characteristic- Low pressure humidifiers work by spraying water through centrifugal force. Unlike high-pressure systems, the water is sprayed into the room in the form of a very fine mist (water droplets below 20 μ) which evaporates immediately - resulting in minimal limescale build-up.
- The humidification capacity is constant and independent of temperature and humidity level.
- Control of an external mechanical hygrostat (option)
- Adjustable capacity from 1 to 7 l / h
- It reduces electrostatic charges
- IP 56
-
Features- Resolution 0.001 ° C, accuracy of 0.01
- Highly intelligent and easy to operate
- AC Power abrupt change feedback
-
Features- New generation high sensitivity CsI scintillation detectors of gamma and LiI of neutron radiation with solid state (silicon) photomultiplier.
- Color display with high resolution.
- Integrated GPS/GLONASS-receiver.
- No “microphone effect”.
- High thermal stability.
- Audio and vibration alarm of threshold levels exceeding.
- Threshold alarm system with four independent threshold levels: – search threshold level (threshold level of count rate from the detector photon and neutron ionizing radiation); – safety threshold level (threshold level of photon ionizing radiation DER); – accumulated dose threshold level.
- Light color alarm (indication) of threshold levels exceeding (gamma radiation – red color, neutron – blue) and visual alarm on the side of the device.
- The dosimeter communicates with a PC via USB-port.
- Powered by built-in lithium polymer storage battery that can be charged via USB-cable.Ingress protection rating IP67.
-
Feature- Repid Measurement
- Auto-Calibration
- Alarm Memory
- Smoke Alarm
- CO2 Alarm
- WiFi
-
Feature- Real time monitor: CO2/TVOC/PM2.5/PM1.0/Temp/Humidity
- Smart App Data logger/export
- 7" Big LCD Display
- Adjustable screen light
- IoT controller/RS485/Relays
- Alarm Notifications
- Auto or Manual Calibration
- Accurate NDIR sensor
-
Features- °F/°C configurable
- No calibration needed
- 1.5" display
- Sleep mode
- Magnetic attachment
- Zeomic antimicrobial coating
- Ø 1.6mm tapered tip
- IP65 splash resistant
-
Features- PTB330 digital barometer for accurate pressure measurement
- Handheld MI70 indicator with a user-friendly, multilingual display
- Service port for MI70 Link software or computer
- Vaisala HUMICAPâ humidity and temperature probe HMP155
- Weatherproof transport case
-
Features- Quick scans of electrical equipment, machinery and other assets
- Enterprise Wi-Fi
- Fully radiometric thermal imager gives you measurement data to the pixel with 120 x 90 infrared resolution (10,800 pixels)
- -4 to 302°F (-20 to 150°C) temperature measurement range
- Manual level and span
-
Features- °F/°C configurable
- 2" antifog backlit display
- Intelligent stabilization alert
- Ambidextrous display
- Antimicrobial coating
- Motion-backlight activation
- IP65 splash resistant
-
Feature- Features real-time gas concentration readings and alarm status
- Large graphic display’s icon-driven interface rotates 180°, for added convenience
- User-friendly design allows easy access to pump, sensors, filter, and battery compartment
- Wireless unit provides 5-way remote notification of alarm conditions
- Equipped with “man down” alarm with pre-alarm and real-time remote wireless notification
- Measures 5.5" x 3.2" x 1.5" and weighs 12.9 oz.
- Li-ion battery provides a 10 hour battery life
- Features visual, audible, and vibrating alarms
- Gas ranges LEL 0-100%, O2 0-30%, CO 0-500 ppm, and H2S 0-100 ppm
- Intrinsic safety Class 1, Div 1, Groups A, B, C, D; IECEx/ATEX (II 1 GEx ia IIC T4)
- EchoView Host wireless mini-controller item# 102334, sold separately
- Minimum of 1 Echo View is required for wireless communication
-
Feature- Features real-time gas concentration readings and alarm status
- Large graphic display’s icon-driven interface rotates 180°, for added convenience
- User-friendly design allows easy access to pump, sensors, filter, and battery compartment
- Wireless unit provides 5-way remote notification of alarm conditions
- Equipped with “man down” alarm with pre-alarm and real-time remote wireless notification
- Measures 5.5" x 3.2" x 1.5" and weighs 12.9 oz.
- Li-ion battery provides a 10 hour battery life
- Features visual, audible, and vibrating alarms
- Gas ranges LEL 0-100%, O2 0-30%, CO 0-500 ppm, and H2S 0-100 ppm
- Intrinsic safety Class 1, Div 1, Groups A, B, C, D; IECEx/ATEX (II 1 GEx ia IIC T4)
- EchoView Host wireless mini-controller item# 102334, sold separately
- Minimum of 1 Echo View is required for wireless communication
-
Features- Remote continuous computer-aided radiation monitoring of the environment.
- Receipt of measurement results of ambient dose equivalent rate (DER) from the BDBG-09 detection units, ambient temperature values, and service information (serial number, results of self-testing) and data transfer to the server by GPRS channel.
- Display of measurement results in real-time mode, in numerical and/or graphical form, obtained from monitoring points located at a considerable distance.
- Possibility to set a different threshold level of alarm for each of the monitoring points.
- Generation of emergency and warning notifications when DER measurement results of the specified threshold levels are exceeded.
- Storage of measurement results received from monitoring points, emergency and warning notifications to the database.
- Display of saved measurement results from monitoring points, emergency and warning notifications recorded in the database.
- Storage of information received from the detection units BDBG-09 when disconnected from a remote fixed server, and its subsequent transfer when reconnected.
- Possibility to expand functionality through the integration of devices, equipped with RS-485 interface (e.g., weather stations or other types of detectors with the appropriate adaptation of application software).
- Possibility to connect the IT-09 (T) panel directly in the monitoring point installation for the radiation situation assessment.
- Autonomous operation of monitoring points without an external supply voltage of 220 V. The system is equipped with an uninterruptible power supply.
- Use of SCADA software capabilities and benefits when using a server component, including report generation and printing.
-
Features- Industry-leading measurement precision
- Interchangeable high-accuracy probes for T, RH, and CO2
- 30-day memory buffer
- Typical battery life of 18 months in RH and T measurement
- Uses standard alkaline batteries
- Probe calibrations are traceable to SI units through national metrology institutes or accredited calibration laboratories
- Cost-effective alternative to chart recorders
-
Features- Portable, practical
- Quickly checks radiation purity of soil, construction materials, mineral raw materials, wood, housing, vehicles, and such food as baby food, water, milk, meat, fish, eggs, fresh vegetables, fruit, grain, cereals, dried foods, dried herbs (tea)
- Requires no special training of the user, operates in the interactive mode
- Does not require sampling – measurement is done by putting the device to the tested object (material, product, soil, etc.), or by holding it over the studied surfaces
- Requires no special preparation of the food sample (the product remains inside its packaging)
- Requires no special protection
- Ingress protection rating IP5
-
Features- Can be used in private LoRa mode – only compatible with Enless transmitters
- 118 x 79 x 43mm
- IP/MSTP – DHCP/BBMD interfaces
- BACnet ASC profile
- Can manage up to 40 transmitters
- External power supply (7.5 to 24V)
-
Features- For use in LoRa private mode
- IP and RTU RS485 / RS232 Modbus
- Can handle up to 40 transmitters
- Compatible with Modbus PLCs
- Power supply 7.5 – 24 V
- Quick and easy to install
- Compact design
-
Features- RS485 interface Modbus RTU : allows multiple receivers on the same RS485 bus
- Can handle up to 32 transmitters
- Compatible with Modbus PLCs
- Power supply 7.5 – 24 V
- Quick and easy to install
- Compact design
-
Features
- RS232 interface Modbus RTU
- Can handle up to 32 transmitters
- Compatible with Modbus PLCs
- Power supply 7.5 – 24 V
- Quick and easy to deploy
- Compact design
-
Features- Improves reception quality
- High radio power
- No limit on the number of transmitters repeated
- No configuration required
- Power supply 7.5 – 24 V
- Quick and easy to install
-
Feature- Industrial grade sensor
- Measure and display CO2 concentration, temperature and humidity at the same time
- Big size color VA display
- Yellow: 1200 to 1999ppm; Red: over 2000ppm
- 3 colours LED Alarm and buzzer alarm
- Re-chargeable lithium battery
-
Features- Mini, Compact and Portable
- Wide Temperature Rage (-60 to 550°C)
- 8 laser beams
- 12:1, Distance to Spot Ratio
- Interchangeable between °C & °F
- Measurement Recall
- Battery low display
- Fast Response Time
-
Features- Zone Display - clearly indicates the food is out of safe zone (4 to 60°C)above/below
- 2 in 1 design - Infrared + Foldable Thermocouple Probe
- IP65 Protection
- Bright white LED as pointer
- Ultra thin design
- Max/Min and Lock modes
- Retractable probe
- Dual display
- Auto power off
- Adjustable emissivity
-
Features- Electrical Troubleshooting
- Automotive Repair And Maintenance
- Air Conditioner
- Science Experiment
- Manufacturing Processes of Semiconductor Technology
-
Features- Easy to read large display
- Comfort Level Index
- Dual row display
- Low battery indication
-
Features- Temperature and Humidity data
- Data Reading Every 10mins
- Push notification
- Easy to Setup
- Power Monitoring
- Multiple Language Supported
-
Features- Optional data logging function to export data to PC through USB wire
- LCD dot matrix display, support backlight function Built-in sampling pump
- Explosion-proof certified, explosion-proof grade: E x i a IIC T4 Ga
- With Span-calibration and zero calibration functions, makes the detection more accurate and reliable.
- One press to res tore factory setting
-
Features- Adopting world-wide reputation brand of gas sensor
- Detect 1-4 kinds of gases, gas type can be specified, dust particle sensor and temperature & humidity sensor can be added
- Multiple display interfaces, including gas concentration mode, dust weight mode and Particle count mode which can be switched arbitrarily
- Up to 6 particle sizes can be detected at the same time to meet a variety of detection needs
- Support one-key switching between Chinese and English language
- Built-in powerful sampling pump, can work in a slightly negative pressure environment
- Explosion proof certified, explosion proof grade：ExiaⅡCT4
- Unique design with lightweight, its shell is made of high-strength engineering plastic material, non-slip, waterproof, dustproof, explosion-proof
- One press to restore factory setting, free from the bother of mis-operation
- With temperature and pressure compensation, can compensate gas concentration under different temperatures or pressures conditions
- Durable and exquisite aluminum alloy
-
Features- IP67 water & dust resistant and 3 meter drop resistant case, rugged and durable designs.
- Standard man down alarm function
- Real time value, TWA, STEL, MAX, MIN multiple numerical display
- One press to restore factory settings.
- Large graphical display can rotate 180°
- Standard water trap filter to protect the sensor
- With docking station to perform daily bump test and calibration (Optional)
- Wireless data transmission including Lora,
- Bluetooth (Optional)
- Support backlight function the backlight time can be manually set
- Low power consumption, long stand by time
- Support firmware upgrade remotely
-
Features- Rugged and durable
- Explosion-proof circuit design, safe and reliable
- Multiple security protection
- Simultaneous measurement of multiple gases, multiple numerical display
- Large screen display, flexible detection system, multiple filtering devices
- Powerful function, more user-friendly operation
-
Features- Support long distance wireless data communication, with a distance of up to 3 kilometers
- Provide flexible communication protocols that can connect multiple detection devices through serial ports
- Built-in Bluetooth module, which can wirelessly connect to other Bluetooth devices
- Integrated GPS receiver provides global satellite positioning function
- Display wireless signal strength, GPS status, and battery information
- Rechargeable lithium batteries provide long-term operation
- Rugged impact resistant housing
-
Features- Support to monitor 1-18 gas types3.5-inch color LCD display support both real time data and chart, user friendly
- Built-in pump gas sampling, faster response. Equipped with multi-layer filtering, protect sensor from oil, water vapour, dust.
- Standard 32G SD memory card to store and export data by U-disk easily
- Support Lora and other wireless communication (Optional)
- Support built-in printer for real time data printing (Optional)
- High temperature, high humidity environment measurement (Optional)
-
Features
Software
- Accurate real-time data display (i.e. temperature, strength, max-min values, and graphs)
- Maturity calibration database
- Free Android/iOS app with easy-to-use guide
- Project management tools including live data sharing
- Giatec 360 web-based cloud dashboard
- Proactive AI notifications of concrete pouring time and mix calibration errors
- Full PDF & CSV reporting and data exporting
- Open API integration with project management applications (i.e. Procore)
Hardware
- Wire-free and wireless technology
- Fast, simple, and hassle-free activation and installation
- Extended temperature cable and probe for mass concrete
- Two points of temperature measurements located in sensor cable and body
- Rugged and waterproof design
- Long battery life
- 24/7 remote monitoring capabilities with the SmartHub™ device
-
Features- New generation high sensitivity CsI scintillation detectors of gamma and LiI of neutron radiation with solid state (silicon) photomultiplier.
- Color display with high resolution.
- Storage and transfer of 250 complete gamma radiation spectra.
- Powerful CPU and improved algorithms for spectra processing.
- New software for detailed laboratory research and spectra processing.
- Integrated GPS/GLONASS-receiver.
- No “microphone effect”.
- High thermal stability.
- Powered by built-in lithium polymer storage batteries that can be charged via USB-cable.
- The dosimeter communicates with a PC via USB-port.
- Real-time identification of spectra.
- Identification of radionuclides with specification of the categories they belong to (in compliance with IAEA requirements): – medical radionuclides: 18F, 67Ga, 51Cr, 75Se, 89Sr, 99Mo, 99mTc, 103Pd, 111In, 123I, 125I, 131I, 153Sm, 201Tl, 133Хе; – industrial radionuclides: 57Co, 60Co, 133Ba, 137Cs, 192Ir,152Eu, 22Na, 241Am; – special nuclear materials: 233U, 235U, 237Np, Pu [Reactor grade plutonium (more than 6% 240Pu)]; – naturally occurring radioactive materials: 40K, 138La, 226Ra, 232Th-decay series, 238U-decay series. Note. The list of nuclides the device is able to identify may be extended if needed.
- Threshold alarm system with four independent threshold levels: – search threshold level (threshold level of count rate from the detector photon and neutron ionizing radiation); – safety threshold level (threshold level of photon ionizing radiation DER); – accumulated dose threshold level.
- Light color alarm (indication) of threshold levels exceeding (gamma radiation – red color, neutron – blue) and visual alarm on the side of the device.
- Ingress protection rating IP67.Sample of Th232 (Thorium) is included into the Delivery kit for detector age compensation.