- Up to 6 kinds of gases can be detected at the same time. In complex and multi-gas environments, multiple installations can be reduced, saving time and effort
- 2.4-inch industrial-grade high-definition color screen with a resolution of 320*240 and a wide viewing angle of 120 degrees
- With wireless module, data can be uploaded to the cloud platform, environmental protection bureau or other platforms, providing SMS reminder function, the transmission signal is not limited by distance, and can be viewed in real time on mobile phones and computers.(optional)
- With full software automatic verification function and zero calibration function, making gas monitoring more accurate and more reliable
- Standard 4-20mA current signal, RS485 modbus signal,1 set of relay signal output
- Standard infrared remote control, which can remotely control the detector and modify the detector settings
- With sound and light alarm function, there is sound and light alarm when reaching the alarm point.(optional)
-
Features -
Features- Up to 6 kinds of gases can be detected at the same time. In complex and multi-gas environments, multiple installations can be reduced, saving time and effort
- 2.4-inch industrial-grade high-definition color screen with a resolution of 320*240 and a wide viewing angle of 120 degrees
- With wireless module, data can be uploaded to the cloud platform, environmental protection bureau or other platforms, providing SMS reminder function, the transmission signal is not limited by distance, and can be viewed in real time on mobile phones and computers.(optional)
- With full software automatic verification function and zero calibration function, making gas monitoring more accurate and more reliable
- Standard 4-20mA current signal, RS485 modbus signal,1 set of relay signal output
- Standard infrared remote control, which can remotely control the detector and modify the detector settings
- With sound and light alarm function, there is sound and light alarm when reaching the alarm point.(optional)
-
Features- With internal suction pump, fast response
- Up to 6 kinds of gases can be detected simultaneously in 1 device. Easy and cost-effective for installation and maintenance.
- 2.4-inch industrial-grade high-definition color screen with a resolution of 320*240 and a wide viewing angle of 120 degrees.
- With wireless communicate function, real time data can be uploaded to cloud platform, user can check data and receive SMS alarm alert in real time on mobile phones and computers.(optional)
- With manually span and zero calibration function, making gas monitoring more accurate and more reliable.
- Standard 4-20mA analog signal, RS485 modbus signal and relay signal output, optional HART output.
- Standard infrared remote control, optional non-contact magnetic wand control to modify the detector settings.
- With sound and light alarm function, there is sound and light alarm when reaching the alarm point.(optional)
- HD color display, easy operation and user friendly.
- With faulty alarm, will send alarm when there is faulty.
- IP66 protection grade, water proof and dust proof
-
Features- With internal suction pump, fast response
- Up to 6 kinds of gases can be detected simultaneously in 1 device. Easy and cost-effective for installation and maintenance.
- 2.4-inch industrial-grade high-definition color screen with a resolution of 320*240 and a wide viewing angle of 120 degrees.
- With wireless communicate function, real time data can be uploaded to cloud platform, user can check data and receive SMS alarm alert in real time on mobile phones and computers.(optional)
- With manually span and zero calibration function, making gas monitoring more accurate and more reliable.
- Standard 4-20mA analog signal, RS485 modbus signal and relay signal output, optional HART output.
- Standard infrared remote control, optional non-contact magnetic wand control to modify the detector settings.
- With sound and light alarm function, there is sound and light alarm when reaching the alarm point.(optional)
- HD color display, easy operation and user friendly.
- With faulty alarm, will send alarm when there is faulty.
- IP66 protection grade, water proof and dust proof
-
Features- Online monitoring with sound/light alarm (Optional)
- Convenient remote control
- Diversified output signals
- Relay control
- Data transmission to PC
- Durable housing
-
Features- Online monitoring
- Convenient remote control
- Diversified output signals
- Relay control
- Data transmission to PC
- Durable housing
-
Characteristics- Stainless Steel Sensor
- Nominal pressure ranges from 1 mbar up to 20 bar
- Accuracy according to IEC 60770: 0.075 % FSO
- Preferred areas of use are Process, Oil And Gas Industry
-
Characteristics- Ceramic Sensor
- Nominal pressure ranges from 0 ... 160 mbar up to 0... 20 bar
- Accuracy according to IEC 60770: 0.1 % FSO
- Preferred areas of use for Process, Oil And Gas Industry
-
Characteristics- Stainless Steel Sensor
- Nominal pressure ranges from 0 ... 400 mbar up to 0 ... 40 bar
- Accuracy according to IEC 60770: 0.1 % FSO
- Preferred areas of use for Flush, Hygienical Application
-
Characteristics- Ceramic Sensor
- Nominal pressure ranges from 0 ... 160 mbar up to 0... 20 bar
- Accuracy according to IEC 60770: 0.1 % FSO
- Preferred areas of use for Flush, Hygienical Application
-
Feature- Max 500m ultra-long wireless transceiver
- Audible & visual wind speed alarm
- Data recording up to 1 year
- Wind speed, temperature, air pressure measurements
- Max 3 years sensor battery life
- IP67 waterproof & impact resistant
- Fast & secure magnetic installation kit
-
Feature- Max 500m ultra-long wireless transceiver
- Audible & visual wind speed alarm
- Data recording up to 1 year
- Wind speed, wind direction, temp., air pressure measurements
- Max 3 years sensor battery life
- IP67 waterproof & impact resistant
- Fast & secure magnetic installation kit
-
Features- Eliminates the cost of wiring AC power to each monitored point
- Data loggers can be installed wherever a LAN cable can be run
- Increased data communication protection from power outage because the server room's UPS can provide backup power
- Plug and Play connectivity when using viewLinc Aware function
-
Features- Large onboard memory allows mapping studies of almost any length
- Compact, battery powered loggers mean no complex wiring or lengthy setup
- All files are encrypted and reports are 21 CFR Part 11 and Annex 11 compliant
- Optional, comprehensive IQ/OQ protocols save time and costs
- Batch set-up, download, and audit trail filtering make report analysis fast and easy
- Localized versions of vLog software are available in Chinese, Japanese and French
-
Features- Software for continuous monitoring of temperature, humidity and other parameters
- Eight language versions for enterprise-wide, multi-site use
- Preconfigured and custom reports
- Configurable alarm notifications: email, SMS, voice calls, signal towers, browser alerts
- Scheduled threshold alarming and alarm notification delivery times to accommodate maintenance periods or work shifts
- Interactive tours — built-in guidance for novice users
- Licensed features: Voice/SMS web service, third-party Modbus devices, Vaisala OPC UA Server, REST API
-
Features- System validation documentation package designed to provide ISPE Good Automated Manufacturing Practice (GAMP) methodology for viewLinc system validation.
- Available in English, Portuguese, Japanese, and Chinese.
- Specify the required attributes of your viewLinc system using the viewLinc-specific GxP documentation:
- User Requirements Specification
- Functional Specification
- Design Qualification
- Traceability Matrix
- Risk Assessment
-
Features- IP66 Water-Proof
- Accept 9 T/C Types
- Dual Probes (T1-T2)
- Data-Logger Built-In
- USB/RS-232 Output, with Software
- Fine Adjustment Function
- Hi/Lo Alarm
- Max./Min./Avg./Hold
- LED Back-Light
- CE and RoHS Approved
-
Features- K.J.E.T.N.R.S.B Eight Types Available
- Concise Buttons and Operation Interface
- Carry Out Simple and Durable Principles
- Very Practical and Low Prices
- Fast Response and High Accuracy
- RS-232 Signal Output
- CE and RoHS Approved
-
Features- Very long radio range
- IP 65 resistant enclosure for outdoor environments
- PT100 contact probe for remote measurements from -30°C to + 100°C
- Up to 15 years autonomy
- Quick and easy to install
- Replaceable battery
- Compact Design
-
Features- Very long radio range
- IP 65 resistant enclosure for outdoor environments
- Quick and easy to install
- Replaceable battery
- Compact Design
- Up to 15 years autonomy
-
Features- Very long radio range
- IP 65 resistant enclosure for outdoor environments
- Deported immersion measures (agricultural, industrial applications, etc.)
- Up to 15 years autonomy
- Quick and easy to install
- Replaceable battery
- Compact Design
-
Features- Suitable for indoor use
- Meets government requirements for IAQ public places
- Compact Design
- Easy to deploy
- Freestanding or wall mounted
- Replaceable battery
- Up to 10 years autonomy
-
Features
- Suitable for indoor use
- Compact design
- Easy to deploy
- Freestanding or wall mounted
- Replaceable battery
- Up to 15 years autonomy
-
Features- Optical reading head LED
- Very long radio range
- Up to 15 years autonomy
- Interchangeable battery
- Rugged IP 65 enclosure
- Easy to install
- Compact design
-
Features- Approved ATEX device – Explosives Atmospheres –
- Very long radio range
- Rugged IP 65 enclosure
- Up to 15 years autonomy
- Replaceable battery
- Quick and easy to deploy
- Compact design
-
Features- 2 pulse inputs for any type of data collection (water, electricity, etc.)
- Very long radio range
- Rugged IP 65 enclosure for cabinet installations…
- Up to 15 years autonomy
- Interchangeable battery
- Easy to deploy
- Compact design
-
Features- Up to 10 supported energy meters (reading of Modbus registers)
- Compatible reading of holding registers
- Power supply 7.5 – 24 V
- Very long radio range
- Option 2 pulse inputs
- Compact design
-
Features- Possibility to read multiple Modbus registers from an energy meter
- Compatible reading of holding registers
- Power supply 7.5 – 24 V
- Very long radio range
- Option 2 pulse inputs
- Compact design
-
Features- Optical reading head LED
- Very long radio range
- Up to 15 years autonomy
- Interchangeable battery
- Rugged IP 65 enclosure
- Easy to install
- Compact design
-
Features
- Suitable for indoor use
- Meets government requirements for IAQ public places
- Compact Design
- Easy to deploy
- Freestanding or wall mounted
- Replaceable battery
- Up to 10 years autonomy
-
Features- 4/20mA input – terminal block – for all types of industrial applications
- Very long radio range
- Rugged IP 65 enclosure
- Up to 15 years autonomy
- Interchangeable battery
- Easy to deploy
- Compact design
-
Features
- 0-5 V input – terminal block – for all types of industrial applications
- Very long radio range
- Rugged IP 65 enclosure
- Up to 15 years autonomy
- Interchangeable battery
- Easy to deploy
- Compact design
-
Feature- Wet Bulb Globe Temperature (WBGT)
- Thermal Work Limit (TWL)
- Globe Temperature
- Dry Bulb Temperature
- Relative Humidity
- Wet Bulb Temperature
- Wind Speed
-
Feature- High Resolution : 0.01°
- IP66 Water-Proof
- Accept PT100 and PT1000Ω Input
- Dual Probes (T1-T2)
- Large LCD Display with LED Back-Light
- Hold / Max. / Min. / Average
- High / Low Alarm Setting
- USB / RS-232 Output
- CE and RoHS Approved
-
Features- Maximum and Minimum Temperature Record
- Simple and Smart Operation
- Easy to Read Display
- 2 Setting Way (Stand/Hook)
- Waterproof
-
Features- Back flange for mounting
- Large Dial for Easy reading
- No Power Needed
- Color-coded zone
-
Features- High Resolution 0.01 (-200.00 ~ + 1372.00°C)
- Dual Type K (CA) input
- P66 Water-Proof
- USB / RS-232 Output
- High / Low Alarm
- T1-T2 / Max. / Min. / Avg.
- Large Display LED Back-Light
-
Features- Measuring Range : -200 to +1772°C
- High Accuracy and Fast Response
- Digital LCD Display with Back-Light
- Records Max./Min. Values
- RS-232 Signal Output
- CE and ROHS Approved
-
Feature- Manual focus infrared camera with professional grade 320x240 resolution (76,800 pixels)
- Captures optimal images from as close as 0.15m (6in)
- Provides a D:S of 514:1
- Offers temperature measurement range from -20 °C to 550 °C (–4 °F to 1022 °F)
- Includes built-in laser pointer
- Displays images on a 3.5 inch, 320x240 LCD
- Offers five presets of IR-Fusion® with AutoBlend and PIP to help find problems fast
- Captures visible light images with built-in 5 megapixel industrial performance digital camera
- Includes a smart battery system that allows you to easily monitor your battery charge level with five-segment LED display
- Allows real-time communication by email from your smart phone with Fluke Connect®*
- Stores thousands of images—4 GB internal memory and included 4 GB micro SD card
-
Feature- IR Fusion® technology with AutoBlend™ mode blends visual and infrared images so you can see the details crucial to identifying potential problems
- IR-PhotoNotes™ makes it quick and simple to document critical information by allowing you to add up to 3 digital images to your thermal image
- Use voice annotation to document what you're looking at, even in dark spaces, or to capture non-visible surrounding details
- Save time by using color alarms to set temperature thresholds; conduct a quick scan and easily diagnose irregularities
- Fluke Connect® enabled so you can capture and share reliable data you can trust and trace
-
Features- Easily and quickly identify problems before they become expensive failures
- See the details with improved resolution that delivers the right image quality you need to make the proper diagnosis with 2.5 times more pixels
- See more clearly than before and analyze faster with picture-in-picture and blending at different preset levels to capture incredibly detailed images that help identify potential issues
- Clearly see what you are inspecting with 3.5 inch 320 x 240 LCD - 33% more viewing area compared to 3.0 inch LCD screen
- Simple, easy to use point and shoot technology automatically focuses from 0.45m (1.5ft) and beyond
- Fluke Connect with ShareLive video call is the only wireless measurement system that lets you stay in contact with your entire team without leaving the field. The Fluke Connect mobile app is available for Android (4.3 and up) and iOS (4s and later)
-
Feature- Increased sensitivity to visualize temperature differences
- Easier to visualize and diagnose issues with sharper onscreen images, multiple rectangle markers and 9 color palettes
- More intuitive visual interface, improved, user-tested, touch screen interface
- More flexibility to visualize target, tiny-to-large with interchangeable smart lenses - no calibration required, 2x and 4x telephoto, wide angle and macro lens compatibility
- Capture a clear, accurate image focused throughout the field of view with MultiSharp™ Focus
- Get an instant in-focus image of your designated target. LaserSharp® Auto Focus uses a built-in laser distance meter that calculates and displays the distance from your designated target.
- Get 4x the pixel data with SuperResolution, which captures multiple images and combines them to create a 1280 x 960 image
- Save time - wirelessly sync images directly from your camera to the Fluke Connect® system, and attach to an asset record or work order
- Reduce the need take notes in the field with IR-PhotoNotes™ and voice annotations
- Subject to Export Control
-
Features- With 3 Function Buttons °C/°F, IN, OUT
- Easy Operating and Reading
- Max/Min Memory Recalling
- 1m External Wire With Probe for Outdoor Measurement
-
Features- App integration via Bluetooth for fast and convenient monitoring and reporting on site
- Refrigerant update in the instrument via App
- Calculation of superheating/subcooling in real time with up to two external temperature probes
- 2-way valve block with three connections, three hose parkers and sight glass
- 250 hours‘ battery life
-
Features- Volume flow hood for larger swirl outlets for measuring volume flow, temperature and relative humidity
- Impressively light with a weight of 2.9 kg
- Precise measurement even at swirl outlets thanks to integrated volume flow straightener
- Fast set-up, convenient operation and protocol creation on site using the App
-
Feature- Simple, fast and precise flow measurement and volume flow calculations in ventilation ducts
- More flexibility for duct measurements with the cable connected telescopic probe (maximum length 33 in.)
- Fast in-app (duct) configuration, graph history, second screenand measurement data memory in the testo Smart App
- Timed and point mean value calculation
- Durability through compact design with robust housing
-
Features- Five independent measuring channels with alternate indication of data on the single liquid crystal display;
- Built-in gamma, beta sensitive Geiger-Muller counter;
- Automatic setting of measurement intervals and ranges;
- Audio signaling of each detected gamma-quantum and beta-particle;
- Two-tone audio alarm of exceeded programmed threshold levels;
- Digital display backlight;
- Two AAA size batteries;
- Low battery indication;
- Shock resistant body;
- Small weight and dimensions.
-
Features- Three independent measuring channels with alternate indication of data on the single liquid crystal display.
- Built-in gamma, beta sensitive Geiger-Muller counter.
- Automatic setting of measurement intervals and ranges.
- Audio signaling of each registered gamma-quantum or beta-particle.
- Programming of audio alarm threshold level of gamma radiation dose rate.
- Liquid crystal display.
- Two AAA batteries.
- Four-level indication of battery discharge.
- Shock-resistant body.
- Small weight and dimensions.
-
Features- Big display with luminescent backlight.
- Simultaneous indication of units of measurement, measurement errors, threshold level and real time on the display.
- Analog ten-segment indicator of registered radiation intensity.
- Ability to perform measurements with a preset error.
- Four-level indication of battery discharge.
- Built-in memory which allows storing up to 1200 measurements.
- Mode of PC connection via Bluetooth.
- Five independent measuring channels with alternate indication of data on the single liquid crystal display.
- Built-in gamma, beta sensitive Geiger-Muller counter.
- Prompt evaluation of gamma background within 10 seconds.
- Automatic subtraction of gamma background at measurement of beta contamination.
- Measurement results averaging, manually and automatically interrupted.
- Automatic setting of measurement intervals and ranges.
- Audio, vibration and vibration-audio alarm of each detected gamma-quantum or beta-particle that can be switched off.
- Two-tone audio, vibration and vibration-audio alarm of exceeded programmed threshold levels.
- Two AAA batteries.
- Shock-resistant body.
- Small weight and dimensions
-
Features- Alpha-beta-gamma-sensitive Geiger-Mueller counter with mica window.
- Energy-compensating filter, which allows to obtain a reliable energy dependence of the radiometer readings when measuring photon ionizing radiation in the energy range from 12 KeV to 3 MeV.
- Large display with luminescent backlight, which provides simultaneous display of measurement units, measurement errors, threshold level, real time; and an analog indicator of instantaneous radiation intensity.
- Ability to perform measurements with a preset error.
- Prompt evaluation of gamma background within 10 seconds.
- Automatic subtraction of gamma radiation component when measuring beta radiation parameters.
- Automatic subtraction of gamma and beta radiation components when measuring alpha radiation parameters.
- Programming of threshold levels of the alarm system activation for each parameter of measured radiation.
- Automatic setting of measurement intervals and ranges.
- Audio signaling of each registered gamma quantum, alpha or beta particle with the possibility of its deactivation.
- Two-tone audio alarm of exceeded programmed threshold levels.
- Recording in non-volatile memory up to 1000 measurement results.
- Viewing the measurement results previously recorded in non-volatile memory on the indicator, as well as transfer the information to a personal computer via Bluetooth.
- Two AAA batteries.
- Four-level indication of the battery discharge.
- New RadReader software has been developed to work with the device.
-
Features- Adjustable angle of 30/ 60 / 90 Degree
- Alarm beef sound at the high or low temperature limit
- Presentable maximum / minimum temperature limit
- 213mm stainless steel sensor probe
- Temperature unit F/ C degree
- 1 sec. normal temperature sensing time
- One hour auto shut off
- Protect plastic sleeve with clip for stainless steel
-
Best-selling ST-50 series hygro-thermograph recorder equipped with an electronic sensor. Features- Important measurement records can be backed up in CSV format.
- Up to 6 months record on chart paper
- Data can be saved to a memory card (SD card)
- Long term recording
- Long-term stability, wide range measurement
- Sensor cable extension
-
Best-selling hygro-thermograph recorder equipped with an electronic sensor. Features- Easy-to-read digital display
- Up to 6 months continuous recording on chart paper...
- Long-term stable measurement
- Sensor cable extension
- User calibration
- Environmentally friendly product
-
Features- Waterproof
- Stainless Steel Probe
- C / F Selectable
- Max. or Min. Temperature Memory
- Data Hold
- Unit automatic off within 10min.
- With Protective Probe Cover
-
Feature- Perform OSHA and IEC noise accumulation surveys
- 6 built-in standard dose measurement setups: OSHA/
- MSHA/DOD/ACGIH/ISO85/ISO90
- One user defined measurement setup
- Adjustable criterion level, exchange rate & threshold
- Data logger up to 10,00,000 readings.
- Sampling times between 1 sec to 2 h
- Stores up to 10,000 dose meter survey results
- Dose Meter Mode: record time stamp, %Dose, TWA8, LEP, 8h, Leq, SEL, LN%, SPLmax, SPLmin, PeakMAX
- Sound Level Meter mode: Leq, PeakMAX & SEL
- USB interface. Support Windows XP / Vista / 7 / 8
-
Feature- IEC 61672-1:2013 Class 1 Standard
- 27-140 dB measurement range
- ±0.7 dB high accuracy
- 0.1 dB resolution
- 10-20k Hz frequency range
- A, C, Z frequency weightings
- Fast, Slow, Impulse, Peak time weightings
- RS232 Data Output / USB computer interface
- Data Logging & Record functions
- Measurement Report Printing Optional: Portable High Speed Printer Kit Optional: Class 1 Sound Level Calibrator (94/114 dB)
-
Features- New generation high sensitivity CsI scintillation detectors of gamma and LiI of neutron radiation with solid state (silicon) photomultiplier.
- Color display with high resolution.
- Storage and transfer of 250 complete gamma radiation spectra.
- Powerful CPU and improved algorithms for spectra processing.
- New software for detailed laboratory research and spectra processing.
- Integrated GPS/GLONASS-receiver.
- No “microphone effect”.
- High thermal stability.
- Powered by built-in lithium polymer storage batteries that can be charged via USB-cable.
- The dosimeter communicates with a PC via USB-port.
- Real-time identification of spectra.
- Identification of radionuclides with specification of the categories they belong to (in compliance with IAEA requirements): – medical radionuclides: 18F, 67Ga, 51Cr, 75Se, 89Sr, 99Mo, 99mTc, 103Pd, 111In, 123I, 125I, 131I, 153Sm, 201Tl, 133Хе; – industrial radionuclides: 57Co, 60Co, 133Ba, 137Cs, 192Ir,152Eu, 22Na, 241Am; – special nuclear materials: 233U, 235U, 237Np, Pu [Reactor grade plutonium (more than 6% 240Pu)]; – naturally occurring radioactive materials: 40K, 138La, 226Ra, 232Th-decay series, 238U-decay series. Note. The list of nuclides the device is able to identify may be extended if needed.
- Threshold alarm system with four independent threshold levels: – search threshold level (threshold level of count rate from the detector photon and neutron ionizing radiation); – safety threshold level (threshold level of photon ionizing radiation DER); – accumulated dose threshold level.
- Light color alarm (indication) of threshold levels exceeding (gamma radiation – red color, neutron – blue) and visual alarm on the side of the device.
- Ingress protection rating IP67.Sample of Th232 (Thorium) is included into the Delivery kit for detector age compensation.
-
Features
Software
- Accurate real-time data display (i.e. temperature, strength, max-min values, and graphs)
- Maturity calibration database
- Free Android/iOS app with easy-to-use guide
- Project management tools including live data sharing
- Giatec 360 web-based cloud dashboard
- Proactive AI notifications of concrete pouring time and mix calibration errors
- Full PDF & CSV reporting and data exporting
- Open API integration with project management applications (i.e. Procore)
Hardware
- Wire-free and wireless technology
- Fast, simple, and hassle-free activation and installation
- Extended temperature cable and probe for mass concrete
- Two points of temperature measurements located in sensor cable and body
- Rugged and waterproof design
- Long battery life
- 24/7 remote monitoring capabilities with the SmartHub™ device
-
Features- Support to monitor 1-18 gas types3.5-inch color LCD display support both real time data and chart, user friendly
- Built-in pump gas sampling, faster response. Equipped with multi-layer filtering, protect sensor from oil, water vapour, dust.
- Standard 32G SD memory card to store and export data by U-disk easily
- Support Lora and other wireless communication (Optional)
- Support built-in printer for real time data printing (Optional)
- High temperature, high humidity environment measurement (Optional)
-
Features- Support long distance wireless data communication, with a distance of up to 3 kilometers
- Provide flexible communication protocols that can connect multiple detection devices through serial ports
- Built-in Bluetooth module, which can wirelessly connect to other Bluetooth devices
- Integrated GPS receiver provides global satellite positioning function
- Display wireless signal strength, GPS status, and battery information
- Rechargeable lithium batteries provide long-term operation
- Rugged impact resistant housing
-
Features- Rugged and durable
- Explosion-proof circuit design, safe and reliable
- Multiple security protection
- Simultaneous measurement of multiple gases, multiple numerical display
- Large screen display, flexible detection system, multiple filtering devices
- Powerful function, more user-friendly operation
-
Features- IP67 water & dust resistant and 3 meter drop resistant case, rugged and durable designs.
- Standard man down alarm function
- Real time value, TWA, STEL, MAX, MIN multiple numerical display
- One press to restore factory settings.
- Large graphical display can rotate 180°
- Standard water trap filter to protect the sensor
- With docking station to perform daily bump test and calibration (Optional)
- Wireless data transmission including Lora,
- Bluetooth (Optional)
- Support backlight function the backlight time can be manually set
- Low power consumption, long stand by time
- Support firmware upgrade remotely
-
Features- Adopting world-wide reputation brand of gas sensor
- Detect 1-4 kinds of gases, gas type can be specified, dust particle sensor and temperature & humidity sensor can be added
- Multiple display interfaces, including gas concentration mode, dust weight mode and Particle count mode which can be switched arbitrarily
- Up to 6 particle sizes can be detected at the same time to meet a variety of detection needs
- Support one-key switching between Chinese and English language
- Built-in powerful sampling pump, can work in a slightly negative pressure environment
- Explosion proof certified, explosion proof grade：ExiaⅡCT4
- Unique design with lightweight, its shell is made of high-strength engineering plastic material, non-slip, waterproof, dustproof, explosion-proof
- One press to restore factory setting, free from the bother of mis-operation
- With temperature and pressure compensation, can compensate gas concentration under different temperatures or pressures conditions
- Durable and exquisite aluminum alloy
-
Features- Optional data logging function to export data to PC through USB wire
- LCD dot matrix display, support backlight function Built-in sampling pump
- Explosion-proof certified, explosion-proof grade: E x i a IIC T4 Ga
- With Span-calibration and zero calibration functions, makes the detection more accurate and reliable.
- One press to res tore factory setting
-
Features- Temperature and Humidity data
- Data Reading Every 10mins
- Push notification
- Easy to Setup
- Power Monitoring
- Multiple Language Supported
-
Features- Easy to read large display
- Comfort Level Index
- Dual row display
- Low battery indication
-
Features- Electrical Troubleshooting
- Automotive Repair And Maintenance
- Air Conditioner
- Science Experiment
- Manufacturing Processes of Semiconductor Technology
-
Features- Zone Display - clearly indicates the food is out of safe zone (4 to 60°C)above/below
- 2 in 1 design - Infrared + Foldable Thermocouple Probe
- IP65 Protection
- Bright white LED as pointer
- Ultra thin design
- Max/Min and Lock modes
- Retractable probe
- Dual display
- Auto power off
- Adjustable emissivity
-
Features- Mini, Compact and Portable
- Wide Temperature Rage (-60 to 550°C)
- 8 laser beams
- 12:1, Distance to Spot Ratio
- Interchangeable between °C & °F
- Measurement Recall
- Battery low display
- Fast Response Time
-
Feature- Industrial grade sensor
- Measure and display CO2 concentration, temperature and humidity at the same time
- Big size color VA display
- Yellow: 1200 to 1999ppm; Red: over 2000ppm
- 3 colours LED Alarm and buzzer alarm
- Re-chargeable lithium battery
-
Features:- Simple operation and maintenance
- Easy calibration of relative humidity sensors
- Excellent chamber stability and uniformity
- Manual control or optional straightforward automated set point programming
- Optional in-built data-logging for reference probe and probes under calibration
- Humidity and temperature controlled chamber
- Generate 10 to 90% RH over +10 to +50°C (+50 to +122°F) temperature
- Transportable to allow on-site calibrations
-
Features- Improves reception quality
- High radio power
- No limit on the number of transmitters repeated
- No configuration required
- Power supply 7.5 – 24 V
- Quick and easy to install
-
Features- RS232 interface Modbus RTU
- Can handle up to 32 transmitters
- Compatible with Modbus PLCs
- Power supply 7.5 – 24 V
- Quick and easy to deploy
- Compact design
-
Features
- RS485 interface Modbus RTU : allows multiple receivers on the same RS485 bus
- Can handle up to 32 transmitters
- Compatible with Modbus PLCs
- Power supply 7.5 – 24 V
- Quick and easy to install
- Compact design
-
Features- For use in LoRa private mode
- IP and RTU RS485 / RS232 Modbus
- Can handle up to 40 transmitters
- Compatible with Modbus PLCs
- Power supply 7.5 – 24 V
- Quick and easy to install
- Compact design
-
Features- Can be used in private LoRa mode – only compatible with Enless transmitters
- 118 x 79 x 43mm
- IP/MSTP – DHCP/BBMD interfaces
- BACnet ASC profile
- Can manage up to 40 transmitters
- External power supply (7.5 to 24V)
-
Features- Portable, practical
- Quickly checks radiation purity of soil, construction materials, mineral raw materials, wood, housing, vehicles, and such food as baby food, water, milk, meat, fish, eggs, fresh vegetables, fruit, grain, cereals, dried foods, dried herbs (tea)
- Requires no special training of the user, operates in the interactive mode
- Does not require sampling – measurement is done by putting the device to the tested object (material, product, soil, etc.), or by holding it over the studied surfaces
- Requires no special preparation of the food sample (the product remains inside its packaging)
- Requires no special protection
- Ingress protection rating IP5
-
Features- Industry-leading measurement precision
- Interchangeable high-accuracy probes for T, RH, and CO2
- 30-day memory buffer
- Typical battery life of 18 months in RH and T measurement
- Uses standard alkaline batteries
- Probe calibrations are traceable to SI units through national metrology institutes or accredited calibration laboratories
- Cost-effective alternative to chart recorders
-
Features- Remote continuous computer-aided radiation monitoring of the environment.
- Receipt of measurement results of ambient dose equivalent rate (DER) from the BDBG-09 detection units, ambient temperature values, and service information (serial number, results of self-testing) and data transfer to the server by GPRS channel.
- Display of measurement results in real-time mode, in numerical and/or graphical form, obtained from monitoring points located at a considerable distance.
- Possibility to set a different threshold level of alarm for each of the monitoring points.
- Generation of emergency and warning notifications when DER measurement results of the specified threshold levels are exceeded.
- Storage of measurement results received from monitoring points, emergency and warning notifications to the database.
- Display of saved measurement results from monitoring points, emergency and warning notifications recorded in the database.
- Storage of information received from the detection units BDBG-09 when disconnected from a remote fixed server, and its subsequent transfer when reconnected.
- Possibility to expand functionality through the integration of devices, equipped with RS-485 interface (e.g., weather stations or other types of detectors with the appropriate adaptation of application software).
- Possibility to connect the IT-09 (T) panel directly in the monitoring point installation for the radiation situation assessment.
- Autonomous operation of monitoring points without an external supply voltage of 220 V. The system is equipped with an uninterruptible power supply.
- Use of SCADA software capabilities and benefits when using a server component, including report generation and printing.
-
Feature- Features real-time gas concentration readings and alarm status
- Large graphic display’s icon-driven interface rotates 180°, for added convenience
- User-friendly design allows easy access to pump, sensors, filter, and battery compartment
- Wireless unit provides 5-way remote notification of alarm conditions
- Equipped with “man down” alarm with pre-alarm and real-time remote wireless notification
- Measures 5.5" x 3.2" x 1.5" and weighs 12.9 oz.
- Li-ion battery provides a 10 hour battery life
- Features visual, audible, and vibrating alarms
- Gas ranges LEL 0-100%, O2 0-30%, CO 0-500 ppm, and H2S 0-100 ppm
- Intrinsic safety Class 1, Div 1, Groups A, B, C, D; IECEx/ATEX (II 1 GEx ia IIC T4)
- EchoView Host wireless mini-controller item# 102334, sold separately
- Minimum of 1 Echo View is required for wireless communication
-
Feature- Features real-time gas concentration readings and alarm status
- Large graphic display’s icon-driven interface rotates 180°, for added convenience
- User-friendly design allows easy access to pump, sensors, filter, and battery compartment
- Wireless unit provides 5-way remote notification of alarm conditions
- Equipped with “man down” alarm with pre-alarm and real-time remote wireless notification
- Measures 5.5" x 3.2" x 1.5" and weighs 12.9 oz.
- Li-ion battery provides a 10 hour battery life
- Features visual, audible, and vibrating alarms
- Gas ranges LEL 0-100%, O2 0-30%, CO 0-500 ppm, and H2S 0-100 ppm
- Intrinsic safety Class 1, Div 1, Groups A, B, C, D; IECEx/ATEX (II 1 GEx ia IIC T4)
- EchoView Host wireless mini-controller item# 102334, sold separately
- Minimum of 1 Echo View is required for wireless communication
-
Features- °F/°C configurable
- 2" antifog backlit display
- Intelligent stabilization alert
- Ambidextrous display
- Antimicrobial coating
- Motion-backlight activation
- IP65 splash resistant
-
Features- Quick scans of electrical equipment, machinery and other assets
- Enterprise Wi-Fi
- Fully radiometric thermal imager gives you measurement data to the pixel with 120 x 90 infrared resolution (10,800 pixels)
- -4 to 302°F (-20 to 150°C) temperature measurement range
- Manual level and span
-
Features- PTB330 digital barometer for accurate pressure measurement
- Handheld MI70 indicator with a user-friendly, multilingual display
- Service port for MI70 Link software or computer
- Vaisala HUMICAPâ humidity and temperature probe HMP155
- Weatherproof transport case
-
Features- °F/°C configurable
- No calibration needed
- 1.5" display
- Sleep mode
- Magnetic attachment
- Zeomic antimicrobial coating
- Ø 1.6mm tapered tip
- IP65 splash resistant
-
Feature- Real time monitor: CO2/TVOC/PM2.5/PM1.0/Temp/Humidity
- Smart App Data logger/export
- 7" Big LCD Display
- Adjustable screen light
- IoT controller/RS485/Relays
- Alarm Notifications
- Auto or Manual Calibration
- Accurate NDIR sensor
-
Feature- Repid Measurement
- Auto-Calibration
- Alarm Memory
- Smoke Alarm
- CO2 Alarm
- WiFi
-
Features- New generation high sensitivity CsI scintillation detectors of gamma and LiI of neutron radiation with solid state (silicon) photomultiplier.
- Color display with high resolution.
- Integrated GPS/GLONASS-receiver.
- No “microphone effect”.
- High thermal stability.
- Audio and vibration alarm of threshold levels exceeding.
- Threshold alarm system with four independent threshold levels: – search threshold level (threshold level of count rate from the detector photon and neutron ionizing radiation); – safety threshold level (threshold level of photon ionizing radiation DER); – accumulated dose threshold level.
- Light color alarm (indication) of threshold levels exceeding (gamma radiation – red color, neutron – blue) and visual alarm on the side of the device.
- The dosimeter communicates with a PC via USB-port.
- Powered by built-in lithium polymer storage battery that can be charged via USB-cable.Ingress protection rating IP67.
-
Features- Resolution 0.001 ° C, accuracy of 0.01
- Highly intelligent and easy to operate
- AC Power abrupt change feedback
-
Characteristic- Low pressure humidifiers work by spraying water through centrifugal force. Unlike high-pressure systems, the water is sprayed into the room in the form of a very fine mist (water droplets below 20 μ) which evaporates immediately - resulting in minimal limescale build-up.
- The humidification capacity is constant and independent of temperature and humidity level.
- Control of an external mechanical hygrostat (option)
- Adjustable capacity from 1 to 7 l / h
- It reduces electrostatic charges
- IP 56
-
Features- °F/°C configurable
- Backlit display
- Set HI\LO temperature brackets for both sensors
- Set target temperatures for both sensors
- Magnetic attachment
- Timer, stopwatch, and resting alarm
- IP65 water resistant
-
Features- New chilled mirror hybrid sensor gives fast dynamic response to changes in humidity
- Accurate to +-0.15 Degree C dew point, +- 0.1. Degree C Temperature
- Wide measurement range from -40 to + 120 Degree dew point
- Choice of communication methods, including Modbus TCP over Eternal communication for easy networking
- Optional pressure transmitter for accurate calculation of ppm & g/kg
-
Features- Measurements are traceable to the International System of units (SI) through national metrology institutes.
- Software options include vLog for Validation/Mapping and viewLinc continuous monitoring and alarming.
- The Vaisala OPC-DA Server software can be used to integrate Vaisala DL-series data loggers to non-Vaisala systems
-
Features- Measurement independent of oil type, age and temperature - indicates margin to oil saturation
- In-line process checking through ball valve, no need to drain the oil
- Rugged and reliable construction
- Multi-probe operation; dewpoint and CO2 probes can also be connected
- Vaisala HUMICAP Sensor - proven field performance since 1973
-
Features- Possibility to measure ambient dose equivalent rate (DER) of gamma radiation with the detector which is built in the control panel.
- Automatic selection between measurement intervals and ranges.
- Audio signalling of each registered gamma-quantum or beta particle.
- Backlit indicator and control keys for operation in the dark.
- Rechargeable lithium-ion battery charging by the built-in charger from: – internal solar battery; – 12 V automobile battery; – 220 V/50 Hz mains power using a voltage converter.
- Multilevel indication of battery discharge.
- Operates under conditions involving atmospheric precipitation, dusty atmosphere (IP67).
- Analog indicator of radiation intensity.
- Logging of up to 1500 measurement results tagged to location coordinates in the nonvolatile memory via infrared port to the PC (built-in GPS/GLONASS receiver).
- Viewing of logged measurement results on the display.
- Easy to operate even if wearing personal protection – rubber gloves.
- Wide operating temperature range – from -30…+55°C.
- Display temperature resistance – +95°C.
- Gas-discharge Geiger-Muller counters without return run of counting response
- Silicon beta radiation detector
-
Features- IP68 water- and dust-resistant case
- Low power consumption with 2 years standby time, no need battery charge and calibration
- With Single /multi unit docking station to perform daily bump test and calibration (Optional)
- With event and data logging function(optional)
- With self-test function, which can improve safety by automatic self-test
- Small size, light weight and with back clip for easily carry
- 95db@30cm buzzer alarm, 2 high-bright red LED light alarm and vibration alarm
- · Real time value, TWA, STEL, MAX,MIN multiple numerical display
-
Feature- Numerous connectivity solutions. Compact and lightweight.
- Strong, protective, concussion-proof design.
- Real-time gas concentration readings, location, alarm, and status enabled by state-ofthe-art wireless technology.
- IP67 water and dust resistant case
- Five-way local and remote notification of alarm conditions. Short bump test and calibration time. Global approval for worldwide acceptance
- Filtered LEL sensor options to inhibit sensor poisoning. Compatible with Safety Communicator. Device Management with Honeywell Safety Suite
-
Features- IP66/IP68 water & dust resistant and 1.5 meters drop resistant case, rugged and durable designs
- Compact, lightweight, small size with back clip, ergonomic and wearable design
- Standard man down alarm, password protection, ID identification function
- Real time value, TWA, STEL, MAX, MIN multiple numerical display
- With self-test function, which can improve safety by automatic self-test
- Standard 1000 data records and 100 events records
- Support firmware upgrade remotely
- With docking station to perform daily bump test and calibration (Optional)
- Wireless data transmission including Lora, Bluetooth (Optional)
- Low power consumption, battery run time is up to 24 hours per charge
-
Features- Rapid spot-check measurements to –50°Cdp
- T95 to –35°C dew point in <10 minutes
- Simple operation
- Integral sampling system
- Industrial case
- ±2°Cdp accuracy
- 9-point traceable calibration
- 16 hours of operation between charges
-
Features- Repeatedly fast measurements at low pressure in less than 15 minutes for T95 down to -60°C dew point (-76°F dew point)
- Higher pressure measurements possible - up to 35 MPa (350 barg / 5076 psig)
- Long battery life: up to 48 hours of typical use between charges
- Intuitive application kits allow quick and straightforward connection to your sample point
- Durable, yet easy to handle and operate: designed for use in industrial environments
- Lightweight: less than 1.5kg (3.31lbs)
- 13 point traceable calibration certificate
-
Features- Displays %RH and temperature, plus dew point, absolute humidity and wet bulb temperature
- Simple to operate
- Long term stability: ±1% RH over 12 months
-
Features:- Moisture measurement and control
- 4~20 mA or 0~2 Vdc output
- IP65 watertight enclosure, stainless steel probe
- Custom calibration for measuring object
- Wide supply voltage: 12 ~ 40 Vdc
- Easy mounting and quick wiring
-
Features:- Moisture measurement and control
- 4~20 mA or 0~2 Vdc output
- IP65 watertight enclosure, stainless steel probe
- Custom calibration for measuring object
- Wide supply voltage: 12 ~ 40 Vdc
- Easy mounting and quick wiring
-
Features:- High accurate, fat response
- Auto temperature compensation
- Data-Hold / Max. / Min.
- Auto power off
- Built-in calibration (CAL) function
- Drop/dust-proof, long term stability
-
Features:- Built-in multifunction
- Suitable different type of probes
- 8 type of wood calibrations scales
- Data-Hold, Max./Min.
- Built-in calibration
- Easy to operate, long-term stability
-
Features:- Multi-color LED Bar-Graph readout
- 5.5% to 100% Moisture Range
- 0~1 Vdc Signal Output
- Audible alert when value is detected
- Built-in calibration function
- Sturdy and durable moisture probe
- CE and RoHS Approved
-
Features:- Digital LCD display with backlight
- 5.5% to 99.9% Range, 0~1 V
- Stored up to 99 readings
- 8 wood groups build in
- Max./Min./Average values recalled
- Built-in calibration
- Changeable of extension probe
- CE and RoHS Approved
-
Features- Large display for actual measurement
- Max./ Min./ AVG indication
- External temperature probe input
- Battery status indication
- Easy to use Window software
- Visual and acoustic Hi-Lo Alarm
- Adjustable logging interval from 1 second to 24hours
- Easy to change battery